Sven PS-420 User manual

www.sven.fi
User’s Manual
Portable Speaker System
with Bluetooth and FM-radio
PS-420

ENG
2
Portable Speaker System
with Bluetooth and FM-radio
Congratulations on your purchase of the SVEN speaker system!
COPYRIGHT
© 2018. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained in it are copyrighted. All rights reserved.
BUYER RECOMMENDATIONS
• Unpack the device carefully. Make sure there are no accessories left in the box. Check up
the device for damage; if the product was damaged during transportation, address the firm
which carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of household and computer
equipment.
APPLICATION
SVEN PS-420 portable multimedia speaker system with Bluetooth and FM-radio is
designed for operation with PC, notebooks and other mobile devices by means of data
transfer via Bluetooth protocol. It can be also used in Internet telephony, during video
conferences, in multimedia applications, in interactive games, for speech recognition and
foreign language teaching. FM-tuner and the player with USB-flash and micro SD-cards
are included.
PACKAGE CONTENTS
• Speaker system – 1 pc
• 3.5 mm mini-jack to 3.5 mm mini-jack signal cable – 1 pc
• USB to micro USB power cable – 1 pc
• User’s Manual – 1 pc
• Warranty card – 1 pc
SPECIAL FEATURES
• Bluetooth wireless signal transmission
• Track switching control possibility
• Wired/wireless audio signal transmission
• Built-in player for audio files from USB-flash and micro SD card
• Built-in FM tuner
• LED display
• Radius of operation up to 10 m

ENG
3
User’s Manual PS-420
Speaker system description
a MODE: switching modes button: Bluetooth/Radio / Player/LINE IN
b EQ: EQ mode switch button
c Vol-: volume decrease button
d Vol+: volume increase button
e REP/CH: button for switching between stations or frequency (in Radio mode);
repeat mode selection button (in the Player mode):
ONE – repeats the current track; RAND – play tracks in the random order; ALL – plays all
tracks in the sequential order
f Previous track (short pressing in Player and Bluetooth mode); Navigation on the track
(long pressing in Player mode); Previous track/station (in Radio mode)
g Play/Pause button (in Player and Bluetooth mode); Start/Stop auto scan (long pressing
in Radio mode); Mute (short pressing in Radio mode)
h Next track (short pressing in Player and Bluetooth mode); Navigation on the track (long
pressing in Player mode); Next track/station (in Radio mode)
i Display
j Microphone
k DC 5V: micro USB jack for charger connecting, the USB port of laptop / PC
l Indicator
m ON/OFF: POWER button
n USB: USB-flash card slot
o TF CARD: micro SD card slot
p AUX: 3.5 mm mini-jack for audio signal connecting (phone, MP3 player, etc.)
Fig. 1. Speaker system description
abcd ef hg
ji
Fig. 2. Front view
SVEN

ENG
4
Portable Speaker System
with Bluetooth and FM-radio
CONNECTION AND OPERATION
Attention! The built-in battery must be
charged completely prior to the
application.
Speaker system battery charging
• Connect speaker system to a USB
port of PC or USB charger using
micro USB to USB cable (included).
During battery charging the indicator
l is red. Indicator l goes out when
the battery is charged.
• The battery is used in the speaker system as an integral part of the device, therefore do
not try to extract or replace it, because this can result in the warranty cancellation or the
device damage.
Fig. 3. Rear panel
klmn op
DC 5V ON OFF USB
AUXTF
CARD
OPERATION MODES
Bluetooth mode
• Wireless data transfer via the Bluetooth protocol enables to connect speaker system to
compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as
walls or other electronic devices can interfere with the signal transfer.
• Turn on the speaker system Bluetooth mode – press button МODE a нseveral times until
display shows «bt» inscription.
• It is necessary to select the search mode of devices with Bluetooth on a signal source
(telephone, notebook, smartphone, etc.). «SVEN PS-420», massage will be displayed on
the screen which is to be connected to*.
• When connection is successful, there will be a short beep and the indication of the search
mode on speaker system is over**.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode
activation is not obligatory. Choose the item name “SVEN PS-420” and the “connect” command on
the source.
Radio mode
• Turn on the speaker system – press button МODE a several times until the display
shows the station frequency. Long-term pressing button g activates auto search mode.
After scanning completion, the first scanned radio station will start to operate automatically.
With buttons f and h select a desired radio station.

5
PS-420
ENG
User’s Manual
Fig. 4. Connection diagram
USB jack
Socket Mobile device
USB to micro USB Power cable
PC
Mini-jack to mini-jack signal cable
DC 5V ON OFF USB
AUX
TF
CARD
TECHNICAL SPECIFICATIONS
Notes. Technical specifications given in this table are supplemental information and cannot
give occasion to claims. Technical specifications and package contents are subject to change
without notice due to the improvement of SVEN production.
Technical support is on www.sven.fi.
Parameter, measurement unit
Frequency range, Hz
Output power (RMS), W:
Speaker diameter, mm
Bluetooth supported profiles
Radius of operation, m
Battery capacity, mA * h
Power supply, V
Weight, g
Dimensions, mm
Value
speaker: 100 – 20 000; microphone: 100 – 10 000
12 (2 × 6)
Ø 75
HSP, HFP, A2DP, AVRCP
up to 10
1800
USB/DC5V
1000
320 × 156 × 120
Player mode
Attention! The file system of a micro SD carrier is FAT32. Maximum volume is 32 GB. It is not
recommended to use the micro SD Ultra Speed.
• The system will enter the Player mode automatically when a carrier (USB flash or SD
card) is connected to corresponding ports. Use button g to switch between Play / Pause
modes. You can control tracks by using buttons f (previous track) and h (next track).
The use in the wired mode (LINE IN)
• Speaker system can be used as an external device for amplifying any audio source with a
3.5 mm output mini-jack. To do this, connect a cable mini USB, plug 3.5 mini-jack to the
audio input AUX.