Leicke EP18174 User manual

Manual
Bluetooth-TWS-Headset
Produktnummer: EP18174+EP18175
EP21501+EP21500

PACKAGE CONTENT
Before attempting to use the device read the instructions carefully and make
sure the following objects are included in the packaging
Pieces
Accessory
Note
1
Wireless headset
Integrated battery
1
Charging cable
-
1
Manual
Scan this QR code and you will be able to download the
Manual.
1
Charging station
-
TECHNICAL DETAILS
Data connection
Bluetooth 5.0
Frequency range
2.402 GHz - 2.480 GHz
Frequency
UHF
Max. transmission
2,92 mW
Transmission range
10 m
Run time
up to 10 h
Stand-by time
up to100 h
Charging time
ca. 2 h
FUNCTION
Switching on:
The headphones turn on automatically when they are removed from the
charging case.

Pairing:
When you remove the earphones from the charger case, the unit will
automatically turn on and switch to TWS pairing mode (if not, please reset the
headphones).
The earphones will pair automatically. Then search and select "LEICKE
EP18174", "LEICKE EP18175", „LEICKE EP21501“ or „LEICKE EP21500“ in
the Bluetooth menu of your phone.
Multipoint pairing with multiple devices:
Pair the headphones with device 1 first, then turn off the Bluetooth of the
device. Now pair with device 2 and then turn on the Bluetooth on device 1
again.
Incoming call:
Briefly tap the R/L touch sensor to answer/hang up the call. Long tap the R/L
touch sensor to decline the call.
Voice Assistant:
1. Press the R/L touch sensor for 2 seconds to access the Siri/Google
assistant.
2. Voice wake-up is supported by saying “Hey, Siri!”
Volume control:
You can reduce the volume by tapping the left touch sensor three times.
Increase the volume by touching the right touch sensor three times.
Music control:
Briefly tap the R/L touch sensor to play or pause music. Double tap the left
touch sensor to switch to the previous track. Double tap the right touch
sensor to move to the next song.
Low-battery warning:
When the battery is low, the “Low-Battery” alarm sounds and the blue LED

lights up, then the headset switches to standby mode.
Headset charging:
Plug the headphones into the base, please press the button of the base, the
headphones are charged, the blue LED is always on. When the battery is fully
charged, the LED of the headphones flashes blue and then goes out.
Charging the base:
Charge the base using the iOS cable. Wireless Charging is supported. When
the base is charged, the red LED flash. When the battery is fully charged, the
red LED indicator continue to light up.

SAFETY NOTES
For your own safety and for long enjoyment of our product, please follow the
following safety instructions:
• Please use device as described in the manual.
• Please keep the device dry and use in dry environment only. Do not
touch with wet hands.
• Keep away from damp, high temperature, dusty, erosive and oxidative
environment.
• Do not open cover and do not touch inner parts.
DISPOSAL
This device contains materials that must not be disposed of as
household waste. Please check local laws concerning the
applicable disposal regulations. Protect the environment by
participating in recycling programs.
DECLARATION OF CONFORMITY
LEICKE GmbH herewith declares that the devices EP18174,
EP18175, EP21501, EP21500 comply with the RED 2014/53/EU
and ROHS 2011/65/EC Annex II 2015/863 as last amended by
Directive (EU) 2017/2102 regulations. The declaration of
conformity can be found at: www.leicke.eu/de/products/XXXXX
XXXXX is EP18174, EP18175, EP21501 or EP21500.
CONTACT
Please contact us in case of questions!
PRODUCTION & DISTRIBUTION
LEICKE GmbH
Stöhrerstraße 17
04347 Leipzig
GERMANY
Web: www.leicke.com
Mail: [email protected]