Leicke KN39774 User manual

User's Manual
4x2 Matrix Switch
Product number: KN39774

Thank you for urchasing the 4x2 Matrix Switch from KanaaN.
We hold several brands to produce and distribute our products: LEICKE ( ower ada ters,
batteries), KanaaN (ada ters/converters, charging cables etc.), Sharon (iPad cases with
keyboard, fans etc.), Hebron ( rotective cases, docking stations, screen rotectors
etc.), Manna (notebook cases).
We continuously work on the further develop ent of our products, our custo er support and
innovations. Our products have a long service life, are eco-friendly and high perfor ing.
Further ore, every day we do our very best to satisfy you as our custo er. That is why you,
no atter if private or business custo er, are in the focus of our co pany‘s efforts. We take
your reviews and proposals seriously and evaluate the continuously. That way, we get to
know you and your de ands on our products and services better and thus allow for positive
enhance ents.
To discover ore about LEICKE products, or if you have any questions about this product,
visit our website www.leicke.co (production & wholesale) or www.leicke-distributor.de
(distribution) and feel free to contact us.
2

Dear customer,
This 4x2 HDMI Matrix Switch from our brand KanaaN is speciall designed for either home or
professional application. It enables ou to connect multiple HDMI devices to two displa
devices without having to change an cables for usage. The included remote control enables
ou to switch easil . This converter is small in size and quite eas to install.
For optimum performance, please read these instructions carefull before connecting,
operating or adjusting this product. Please keep this manual for further reference.
Your LEICKE Team!
PACKAGE CONTENTS
Before atte pting to use this device, please check the packaging and ake sure the
following ite s are contained in the package:
Name Number of Pieces Note
HDMI 4x2 Matrix Switch 1 -
5V/2A power supply 1 plug type dependent on target country
Re ote control 1 -
User's Manual 1 -
3

TECHNICAL DETAILS
Signal In ut/Out ut
Input HDMI 1.3b, HDCP 1.2, 3D-capable (24 Hz)
480i/480p/576i/576p/720p/1080i/1080p
@24/50/60fps, 225Mhz, 6.75Gbps
Output HDMI 1.3b, HDCP 1.2, 3D-capable (24 Hz)
480i/480p/576i/576p/720p/1080i/1080p
@24/50/60fps, 225Mhz, 6.75Gbps, 3D,
Audio (S/PDIF) optical, analogue
Connectors
Input connector 4x HDMI type A
Output connector 2x HDMI type A, Toslink, 3.5 stereo jack
Bit Rate 24 bit, 30/36 Bit Deep Color
Size and Weight
Size (L x W x H) 134 x 90 x 25
Weight (net) 340 g
Environmental S ecifications
Operating Te perature -15°C~55°C
Operating Hu idity 5% to 90% RH (no condensation)
Storage Te perature -15°C~60°C
Storage Hu idity 5% to 90% RH (no condensation)
Power Requirements
External Power Supply 5 V, 2 A
Power Consu ption Max. 5 W
Regulatory A rovals
Converter Unit CE, FCC, RoHS
Power Adapter CE, FCC, CCC
4

PANEL DESCRIPTION
Please study the panel drawings below and beco e fa iliar with the signal input(s), output(s)
and power connector.
CONNECTION DIAGRAM
5

CONNECTION AND OPERATION
ATTENTION: To avoid damages to the video system by inrush current, lease switch
the am lifier/TV off before installing the Matrix Switch!
Ste 1: Please connect the source devices (DVD player etc.) with the interfaces 1-4 of
the Switch.
Ste 2: Now connect the display devices (e.g. bea er or LCD TV) to the two output
interfaces. Please keep in ind, that the audio interfaces at the back of the
Matrix Switch are connected in parallel to output A. If for exa ple an installation
with an additional a plifier is wanted, it would be best to connect this to output A.
The audio signal will then be put out parallel with the HDMI signal.
Ste 3: Now your sound syste can be switched on again, at best in the following order:
source device - Matrix Switch - display device.
Ste 4: When everything is switched on, please choose the source device of your choice
with the included re ote control (re ove battery protection fil !) or with the keys
"A" and "B" at the front of the switch. If a connection was correctly installed, the
Switch will show this with its LED.
Notes:
•Please keep in mind, that the Switch will alwa s choose the first input when switched
on. Therefore, choose a good order for the connection of our HDMI sources.
•The audio button at the remote control switches between the analogue audio output
and the optical S/PDIF output for digital audio. To switch the Matrix Switch will
automaticall restart.
6

FAQ
In general, in case of technical troubles check the electrical signal connections and the power
supply (LED at converter glows) first. If this turns out to be not helpful, we arranged the
following questions and answers for you to find the cause and solve the proble .
Problem Descri tion Possible Cause/Possible Solution
The 4x2 Matrix Switch
cannot be switched on
•Is the power supply properly connected?
No icture and no audio
are dis layed
•Is the source device switched on?
•Is the switch set on the right input interface?
•Is the display device set on the right input interface?*
•Is the right output interface selected?
•Are the cables too long ( ax. 15 input, ax. 25
output) or of bad quality?
The icture is
interru ted every 3
seconds
•This can happen, if one output is not used and both
channels A and B are set on the sa e input. Please switch
the unused output to another input.
The icture is
erroneous, the sound is
disturbed
•Please check if the cables are connected properly and are
not too long and of good quality.
No audio •Is the correct audio standard selected? Choose the button
na ed "Audio", the Switch will now reset. Now choose the
right input.
* Please read the corresponding instructions in the manual of the producer or in the Windows user assistance.
If the roblems cannot be solved, lease don't hesitate to contact us. Our customer's
su ort will be glad to hel you under [e-mail].
7

SAFETY NOTES
For your own safety and for long enjoy ent of our product, please follow the following safety
instructions:
•Please use device as described in the anual.
•To avoid da ages to the video syste by inrush current, please switch the a plifier/TV
off before installing the Matrix Switch. Non-co pliance ay cause da ages to TV,
a plifier syste and your hearing! The a plifier is to be switched on last, after signal
source and 4x2 Matrix Switch are already switched on.
•During operation the Matrix Switch ay beco e very war . Therefore, it is necessary
that the splitter is not covered and stands alone.
•If the 4x2 Matrix Switch does not work nor ally, please disconnect the power adapter
fro the circuit and try to find the cause.
•Use original factory power adapter. Do not atte pt to use the Matrix Switch with other
power adapters. Despite of atching plug connectors it ay still da age the converter,
the signal source and the sound syste !
Warning: Power adapters with a higher voltage ay da age the 4x2 Matrix Switch.
•Turn off power when device is not in use for a longer ti e.
•Do not pull on power cord when taking off the wall socket.
•Do not open cover and do not touch inner parts.
•Please keep power adapter and Matrix Switch dry and just use in dry environ ent.
•Keep away fro da p, high te perature, dusty, erosive and oxidative environ ent.
•Do not touch with wet hands.
•Keep safe fro being hit or falling down.
8

CONTACT
If you have any questions, lease feel free to contact us.
PRODUCTION & WHOLESALE
LEICKE GmbH
Dohnanyistr. 28
04103 Leipzig
Ger any
Web: www.leicke.com
Mail: [email protected]
DISTRIBUTION
LEICKE Distributor (LEICKE GmbH)
Dohnanyistr. 28
04103 Leipzig
Ger any
Web: www.leicke-distributor.de
Mail: [e-mail]
9
Declaration of Conformity with regard to the EU directives 2014/35/EU, 2014/30/EU and
2011/65/EG. See also at www.leicke.com