Whenever you are changing plates or knives in the grinder, doing any maintenance on the grinder, cleaning the grinder, or
the grinder is not being used be sure that the foot switch is disconnected from the electric supply and the switch on the
grinder is in the“OFF”position.
If the grinder switch is“ON”and the foot pedal is bumped or depressed, serious injury may occur.
To Install Switch: Be sure the switch on the grinder is in the“OFF”position. Plug the power cord on the grinder into the
back of the plug on the foot pedal. Now insert the plug of the foot pedal into a 110V. electric outlet. Turn the switch on the
grinder to the“ON”position.The grinder will not operate until the foot pedal is depressed with your
foot.To stop the grinder, release the pressure on the foot pedal by raising your foot.
The S100-Series foot switches make it easy to turn electrical equipment on and o with the foot, freeing the hands to
perform other operations or providing ergonomic improvement to a workstation.The simple momentary action occurs by
pressing down on the front of the switch; an internal spring will return the switch to the“o”position upon release. Ideal
for light-duty industrial, medical, dental, and oce equipment.
Design features:
• Momentary action – press and hold to turn on, release to turn o.
• Durable steel case with powder-painted nish.
• Cover pivots on a steel shaft, providing smooth, precise motion.
•Wide, low-prole shape makes it easy on the user.
• Heel rests on the oor when using this switch.
• Heavy-duty cable with exible strain relief.
• Non-slip 3M® traction pads.
• Certied to CSA and UL standards.
Quality features:
• Designed and manufactured under a quality system certied to ISO 9001 requirements.
• Includes a 1-year warranty on parts and labor.
• Made in USA of imported and domestic components.
Specications:
• Dimensions, L xW x H: 4.3”x 3.5”x 1.4”
•Weight (S100-1001): 1.4 pounds
• IEC enclosure rating: IP-21; NEMA Type 1
• Finish: powder paint, black
CAUTION
To avoid personal injury, do not use foot switches on machinery lacking
eective point-of-operation safeguards.
Disconnect input power before installing or removing this control.
*Momentary action: Press and hold to turn on, release to turn o.
Model Action* Rating Contacts Cord Set Price Certi cation
S100-1001 momentary 10 amp, 125 VAC SPDT 8-foot cable with connector $21.40
S100-1002 momentary 10 amp, 125/250 VAC SPDT 8-foot cable with leads $20.00
S100-1501 momentary 15 amp, 125 VAC SPDT 8-foot cable with connector $22.75
S100-1502 momentary 15 amp, 125/250 VAC SPDT 8-foot cable with leads $21.10
(cable with 3-pronged series connector shown)
LEM Products • West Chester, OH 45011 • PH: 1-877-536-7763 • lemproducts.comLEM Products • West Chester, OH 45011 • PH: 1-877-536-7763 • lemproducts.com
32
FOOT SWITCH FEATURES
SAFETY
