TRENDnet TK-401R Manual

TK-401R
TK-801R
TK-1601R
Quick Installation Guide

7
Port Selection: Push Button and Hot-Key Commands
Auto-Scan Intervals: 5 ~ 99 seconds
External AC Power Adapter: 9V DC, 1A (TK-801/TK1601 only)
Management:
TK-401R: 4 computers
TK-801R: 8 computers
TK-1601R: 16 computers
Console Port Connectors:
(all female)
1 x PS/2 keyboard 6-pin mini din
1 x PS/2 mouse 6-pin mini din
1 x VGA HDB15 15-pin
PC Port Connectors:
(all female)
4/8/16 x PS/2 keyboard 6-pin mini din
4/8/16 x PS/2 mouse 6-pin mini din
4/8/16 x VGA HDB 15-pin
VGA Resolution: 1920 x 1440
Specifications
Weight:
TK-401R : 835g (1.84lb.)
TK-801R : 1.9 kg (4.2 lbs)
TK-1601R : 2.65 kg (5.85 lbs)
0ºC ~ 40ºC (32ºF ~104ºF)Operating Temperature:
-20ºC ~ 60ºC (-4ºF ~ 140ºF)Storage Temperature:
0%~90%, Non-Condensing
Humidity:
FCC and CECertifications:
Dimensions:
TK-401R
202 x 104 x 45mm (8.0 x 4.1 x 1.8 in.)
TK-801R
407 x 165 x 45mm (16.0 x 6.5 x 1.8in.)
TK-1601R
406 x 165 x 85 mm (16.0 x 6.5 x 3.4 in.)

8
Troubleshooting
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Do I need to use the included external AC adapter?
It is recommended that you use the included external AC adapter with the
TK-801R/TK-1601R KVM switch.
I have the KVM switch connected properly, but my keyboard and mouse don't
work.
Please make sure your PS/2 ports are working properly by testing it with
another mouse or keyboard. Once you confirm that the PS/2 ports are functional,
please reboot your computers, and try to use the KVM switch again.
Can I connect or disconnect the KVM cables while the computers are turned
on?
Yes, you can connect or disconnect the KVM cables while the computers are
turned on, because the interface is Hot-Pluggable.
Yes, the KVM switch will restore the keyboard settings when switching
between computers. (i.e.: Cap lock, Num key, etc.)
Go to Section 3 Operation for more information.
If you still encounter problems or have any questions regarding the TK-401R/TK-801R/
TK-1601R please contact Trendnet's Technical Support Department.
Will the KVM switch restore the keyboard settings when switching between
computers?
How do I switch from one computer to another with the KVM switch?
You can switch PCs by pressing the push button on the KVM switch or by
using the Hot-Key commands.