Lenovo C19-10 Instructions for use

C19-10 Simplified service manual for dismantling
Model Name: Lenovo C19-10

Exploded Diagram

1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD y the side
carefully and DON’T touch
or
press panel directly.

2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver (#2)
Spacer screwdriver
Hot hair dryer
Gloves or soft cloth

3. Disassembly SOP
Put the monitor on a flat surface
(Put the EPE on under the
monitor)
Pull out stand
Remove the label * 2
pcs
Tool : Hot hair dryer
Remove the scre * 2
pcs
Tool : Scre driver #2
Press the button

Use the EPE cushion protect panel
OC and pull open the bezel from
top side
Turn the monitor and make rear
cover upside，and then remove
the rear cover
Remove All tape and foil
Release the keypad pcb from the
bezel and unplug light bar line

Unplug LVDS line
Take out of the chassis assembly
Take out of the panel from bezel

Remove the scre * 2
pcs
Tool : Spacer screwdriver
Remove all
the scre s
Tool : Scre driver #2
Take out of the AC socket mylar
sheet from chassis
Take out of the pcb from chassis