Lenovo T24i-30 Instructions for use

Foxconn Technology Group.
T24i-30 Simplified service manual for dismantling
Model Name: Lenovo T24i-30

Exploded Diagram
1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.

Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD by the side
carefully and DON’T touch
or
press panel directly.
2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.

Phillips screwdriver (#2)
spacer screwdriver
C/D disassembly tool
Gloves or soft cloth
3. Disassembly SOP

Put the monitor on a flat surface
(Put the EPE on under the
monitor)
Remove the screw * 4pcs
Tool : Screwdriver #2
Use the C/D disassembly tool to
release Rear cover hook from
disassemble hole on right side
Remove All tape and foil

Remove All screw.
Tool : Screwdriver #2
Unplug light bar line and LVDS
line、Keyboard line
Release the middle frame from the
Panel
Release the keypad pcb from the
the middle frame
Remove All screw.
Tool : Screwdriver #2
Tool : spacer screwdriver

Take out the mylar sheet from
Main chassis
Take out PCB and Peel off all
mylar.
Take out the Thermal pads from
Power pcb