Lenovo ThinkVision P27h-20 Instructions for use

P27h-20 Simplified service manual for dismantling
Model Name: Lenovo P27h-20

Exploded Diagram

1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working platform
to place LCD monitor
horizontally.
Hold LCD by the side
carefully and DON’T touch or
press panel directly.

2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver (#2)
C/D disassembly tool
Gloves or soft cloth

3. Disassembly SOP
Put the monitor on a flat surface
(Put the EPE on under the
monitor)
Push the button to release the stand
Remove
the screw * 4pcs
Tool : Screwdriver #2

Use the C/D disassembly tool to
release Rear cover hook from
disassemble hole on bottom
Remove All tapes and foil
Remove All screw.
Tool : Screwdriver #2
Unplug keypad line 、light bar
line and LVDS 、speaker

Take out the mylar sheet from Main
chassis and remove all tape
Remove All screw.
Tool : Screwdriver #2
Take out PCB and Peel off bottom
mylar and gasket

Take out the Front bezel.