Lenovo ThinkVision T22v-20 User manual

T22v-20 Simplified service manual for dismantling
Model Name: Lenovo T22v-20

Exploded Diagram

1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD by the side
carefully and DON’T touch
or press panel directly.

2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver (#2)
spacer screwdriver
C/D disassembly tool
Gloves or soft cloth

3. Disassembly SOP
Put the monitor on a flat surface
(Put the EPE on under the
monitor)
Push the button to release the stand
Remove the
screw * 4pcs
Tool : Screwdriver #2
Use the C/D disassembly tool to
release Rear cover hook from
disassemble hole on bottom

Remove All tape and foil*5Pcs
Remove the chassis screw and foil
Remove All tape and light bar
connector
Tool : Screwdriver #2
Hold the main chassis to release
the Panel cable and overturned the
chassis
Take out the mylar and tape sheet
from Main chassis
Remove PCB screw and Peel off
the tape of all.
Tool : Screwdriver #2
And Spacer screwdriver

Hold the PCB and release all
connector.
Remove screws to take out the
Front bezel.
Tool : Screwdriver #2
Remove screws to take out the
Camera module
Tool : Screwdriver #1
Used the force to release the knob
as red arrow showing.
Take out the camera stand and
knob.

Remove screws to take out the
Camera stand
Tool : Screwdriver #1
Remove screws to take out the
Camera hinge
Tool : Screwdriver #1
Used the force to release the
camera front and camera back
cover as red arrow showing.