LEOXZ DDU800 User manual

DDU800 | MANUAL
Construction made of metal and carbon fiber
Dashboards and LED bars are compatible with SimHub
4.3-inch IPS LCD with 800x480 pixels and 60 FPS
18 RGB LEDs with adjustable brightness and color
4 custom buttons on the back for screen and led control
Fanatec, Simucube and Simagic Universal bracket
Connect via USB Type-C cable

Notes
•Please read the user guide manual completely before installing or operating the product.
• This product has screen components, so it is important to avoid pressing the screen during use and minimize
contact with it.
•When connecting the product to your PC, make sure that it is firmly attached before turning off the power.
•If using a USB connection, connect it directly to the PC instead of using a USB hub.
•Any modifications, disassemble, tampering, changes or unauthorized uses of the product will void the warranty.
•The product should not be used in wet or liquid environments and should be kept away from high temperatures,
low temperatures, and direct sunlight.
•The maximum input for the USB is 5V 1A.
•This product is designed for simulation use only.
•Leoxz is responsible for revising and explaining this manual, and reserves the right to make changes or corrections
to the information and explanation provided without prior notice and without any responsibility.
1

What's included
•DDU800
•USB-Type C 1.8m Cable
•2 x M4x10 hex bolts
•2 x M6x10 Fanatec hex bolts
•2 x M8x12 Simucube & Simagic hex bolts
•Fanatec Mounting Bracket
•Simucube & Simagic Mounting Bracket
Note: The M3 allen key can only be used to adjust the paddle and remove the front knob for easy sticking of stickers.
2

Select the appropriate mounting
hole based on the required
installation height, and secure the
bracket to the back of the DDU800
using two M4x10 hex bolts, as
shown in the image.
Note:
· Installing at certain special angles or
heights may cause interference
between DDU and cables, and it is
necessary to adjust to a new height.
Forcing installation may result in
unexpected malfunctions.
· The operating torque of the bolts
should not exceed 3Nm.
Installation
M4x10
hex bolts
6
Fanatec Mounting Bracket

The Fanatec Mounting Bracket is
compatible with the largest M6
screw hole on the base.
Taking Fanatec DD2 as an example,
adjust the height of the DDU800 as
shown in the image, and use an
M6x10 bolt to secure the DDU800
to the base.
Note: The operating torque of the bolts
should not exceed 3Nm.
Installation
M6x10
hex bolts
6

USB Connection
Connect DDU to the computer using a Type-C cable. Connect the Type-C end to the back of
DDU and the other end of the cable to the USB 2.0 port on the computer.
Note: Please do not wiggle the Type-C connector in any direction other than insertion, as it may cause unexpected
connector malfunction.
4
USB-Type C Cable

Interface
18 RGB LEDs compatible with Simhub
800x480 IPS LCD compatible with Simhub
4 custom buttons
9

Universal Mounting Bracket
9
The Universal Mounting Bracket is made of 5mm carbon fiber board and has excellent
durability.
Fanatec Mounting Bracket Simucube & Simagic Mounting Bracket

SimBridge Plugin For Simhub
DDU800 will be compatible with simhub through simbridge, enabling dashboard and LEDs
customization. To use it, you need to place SimBridge in the Simhub installation directory and
restart Simhub for it to take effect.
Note: You can download the latest version on the website www.leoxz.com.
11

Simhub Compatibility
11
DDU800 is a plug-and-play device, so
you can connect it to SimHub without
having to complicatedly install any
drivers.
You can display various dashboards on
screen and change brightness through
SimHub, and you can also achieve
various lighting effects by creating
different profiles.
DDU800 uses a specially customized vocore
screen, which can achieve 16bit color and 60FPS
screen update rate through usb2.0,.
When the dashboard has a complex or gradient
image, enable “Dithering” to get a better display
effect.
* Using 60FPS will have higher cpu usage than using
30FPS.

Quick Controls
11
By binding any controller or keyboard input,
you can quickly control the DDU800
dashboards switching, screen and LEDs
brightness.
DDU800 has 4 buttons on the back that can
be bound as quick control buttons or used as
game controller button inputs.

Firmware Update
Through the “Setting” menu of Simbridge, you can check the current firmware version of
DDU800 and update the latest firmware. Once the update is completed, DDU800 will
automatically restart.
Note: You can download the latest firmware on the website www.leoxz.com. Do not operate the steering wheel during
the update process, as it may cause unexpected errors.
12

Hardware Reset
If the firmware update fails and the steering wheel cannot start normally, please try hardware
reset to force the steering wheel to enter Bootload mode and update the firmware again.
12
1. Disconnect the power to the steering wheel
to keep the steering wheel in a power-off state.
2. Press the Reset button.
3. While holding down the Reset button, insert
the USB cable to start the steering wheel. If the
button is still pressed when starting, the
steering wheel will be forced into Bootload
mode.
4. Try updating the firmware again.
Reset button

www.leoxz.com
[email protected]
Copyright © 2023 Leoxz® All Rights Reserved