LEOXZ XF1 SPORT User manual

XF1 SPORT | MANUAL
Injection moulded polyurethane grips
Construction made of metal and carbon fiber
4.3-inch IPS LCD with 480x272 pixels
3 LED bars for displaying RPM, flag, and status.
Up to 15 different LCD dashboards
Optional non-contact clutch and optional paddles
70mm quick release holes and bolt holes

Notes
•Please read the user guide manual completely before installing or operating the racing wheel.
• This racing wheel has screen components, so it is important to avoid pressing the screen during use and minimize
contact with it.
•When connecting the racing wheel to the base, make sure that it is firmly attached before turning off the power.
•If using a USB connection, connect it directly to the PC instead of using a USB hub.
•Any modifications, disassemble, tampering, changes or unauthorized uses of the product will void the warranty.
•The racing wheel should not be used in wet or liquid environments and should be kept away from high
temperatures, low temperatures, and direct sunlight.
•The maximum input for the USB is 5V 1A.
•This racing wheel is designed for simulation use only.
•Leoxz is responsible for revising and explaining this manual, and reserves the right to make changes or corrections
to the information and explanation provided without prior notice and without any responsibility.
1

What's included
•XF1 Sport Steering Wheel
•USB-XS9 Cable
•Custom Stickers
•M3 Allen Key
Note: The M3 allen key can only be used to adjust the paddle and remove the front knob for easy sticking of stickers.
2

Connection
The XF1 Sport supports PC connection via USB 2.0 and BLE 5.0. Both options provide low latency. It is highly
recommended to use the BLE connection, as most bases can power the steering wheel through the quick release,
providing an immersive experience. When using BLE, it is important to ensure that the external antenna is
securely installed.
USB 2.0
For USB wired connection, use the USB-XS9 cable.
The attached spring cable should be used for connection.
Please be mindful of the USB cable winding and avoid
excessive pulling, as it may cause permanent damage to
the XS-9 interface.
BLE 5.0
The BLE 5.0 wireless connection requires power from
the quick release and a PC with a Bluetooth adapter.
It is backward compatible with BLE 4.0 and 4.2.
4
2.4Ghz Antenna

USB Connection
For USB wired connection, use the USB-XS9 cable. The attached spring cable should be used
for connection. Please be mindful of the USB cable winding and avoid excessive pulling, as it
may cause permanent damage to the XS9 interface.
4
USB-XS9 Cable
Note: Make sure that the USB-XS9 cable is aligned
with the raised mark of the XS9 interface, otherwise it
will cause permanent damage to the socket if it is
inserted forcibly.

BLE Connection
The XF1 is recommended to be connected wirelessly, as it eliminates the constraints of a USB cable and
offers low latency and high reliability.
The XF1 supports Bluetooth connection through BLE 4.0, 4.2, and 5.0. The first Bluetooth connection
requires pairing the steering wheel with the PC. Subsequent connections will occur automatically.
On your PC, select Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other
device > Bluetooth. Choose “Leoxz XF1 BLE”, then select Done.
5

QR Installation
The XF1 Sport has 12 mounting holes with a diameter of 70mm for quick release installation,
including 6 through holes and 6 threaded holes. It supports a maximum diameter of 88mm for
the quick release.
Note: The length of the bolt that extends into the steering wheel should not exceed 6mm, it is recommended to use
M5X10 bolts. Using bolts that are too long may cause interference between the bolts and the PCB.
Through Holes
（6XΦ5)
Threaded Holes
(6XM5)
6

Install QR From Outside
Note: Using any QR must and can only be powered and signaled to the XF1 Pro via the USB-XS9 cable.
7

Menu Setting
As shown in the figure, the XF1 Sport can
quickly switch the screen dashboard through
the “Change” button. It has over 15 built-in
dashboard and more types will be added with
firmware updates.
The “Setting” button allows you to switch
between different setting menus, which
include options for adjusting screen
brightness, LED bar brightness, clutch bite
point, axis mode, and more. You can increase
or decrease the parameters by using the
“Value” encoder.
Short press the “Setting” button to enter the
setting menu, then use the <Change> button
to exit the setting menu.
9
Value +/-
Change
Setting

Paddle Adjustment
All paddles can be adjusted to meet the size requirements of different people. By adjusting the
two screws of the paddles, move the paddles outward or inward, and then tightened securely
with the screws.
Note: The operating torque of the bolts should not exceed 3Nm.
10

SimBridge Plugin For Simhub
XF1 Sport will be compatible with simhub through simbridge and enabling LEDs customization.
To use it, you need to place SimBridge in the Simhub installation directory and restart Simhub
for it to take effect.
Note: You can download the latest version on the website www.leoxz.com.
11

Firmware Update
Through the “Setting” menu of Simbridge, you can check the current firmware version of
XF1 Sport( V15 as shown in the image below ) and update the latest firmware. Once the update
is completed, XF1 Sport will automatically restart.
·
Note: You can download the latest firmware on the website www.leoxz.com. Do not operate the steering wheel during
the update process, as it may cause unexpected errors.
12

www.leoxz.com
[email protected]
Copyright © 2023 Leoxz® All Rights Reserved