LevelOne CamCon FCS-4020 User manual

LevelOne
User Manual
FCS-4020
Day & Night
Speed Dome Network Camera
Ver 1.0

LevelOne
2 - User Manual
Table of Contents
Overview.......................................................................................................................................................3
Read Before Use.....................................................................................................................................3
Package Contents ...................................................................................................................................3
Physical Description ................................................................................................................................4
Installation ....................................................................................................................................................7
Hardware Installation...............................................................................................................................7
Network Deployment ...............................................................................................................................8
Software Installation ..............................................................................................................................10
Ready to Use......................................................................................................................................... 11
Accessing the Network Camera .................................................................................................................12
Using Web Browsers.............................................................................................................................12
Using RTSP Players..............................................................................................................................14
Using 3GPP-compatible Mobile Devices...............................................................................................15
Using LevelOne Recording Software ....................................................................................................16
Main Page ..................................................................................................................................................17
Client Settings ............................................................................................................................................21
Conguration ..............................................................................................................................................23
System ..................................................................................................................................................24
Security .................................................................................................................................................26
HTTPS...................................................................................................................................................27
SNMP ....................................................................................................................................................32
Network .................................................................................................................................................33
DDNS ....................................................................................................................................................48
Access List ............................................................................................................................................50
Audio and Video ....................................................................................................................................53
Motion Detection ...................................................................................................................................62
Camera Control .....................................................................................................................................65
Homepage Layout .................................................................................................................................68
Application.............................................................................................................................................71
Recording ..............................................................................................................................................84
Local Storage ........................................................................................................................................87
System Log ...........................................................................................................................................91
View Parameters ...................................................................................................................................92
Maintenance..........................................................................................................................................93
Appendix ....................................................................................................................................................97
URL Commands for the Network Camera.............................................................................................97
Technical Specications ......................................................................................................................149
Technology License Notice..................................................................................................................150
Electromagnetic Compatibility (EMC)..................................................................................................151

LevelOne
User Manual - 3
Overview
LevelOne’s FCS-4020 is a high performance speed dome network camera integrated with a SONY 35x
zoom lens and Exview HAD CCD sensor. With its powerful zoom capability, this camera offers close-up
images of distant objects in sharp detail. It is designed for professional outdoor surveillance applications
where high reliability, sharp images, and weatherproong (IP66 rated) are required.
Along with the high sensitivity SONY Exview HAD CCD sensor and incorporating a removable IR-cut
lter, the FCS-4020 is capable of detection at near infrared light region with great prociency, drastically
improving light efficiency, especially during nighttime. The WDR function enables the FCS-4020 to
generate identiable images, overcoming the difculties of challenging lighting conditions.
Featuring EIS (Electronic Image Stabilizer), the FCS-4020 can mitigate the inuence of vibration caused
by winds or camera rotation so as to ensure stable and recognizable image quality at all times. The 3D
privacy mask function guarantees that private areas are completely sheltered even when the camera
pans, tilts, and zooms. When zooming in, the privacy mask will be enlarged to provide comprehensive
blockage of the private area. In addition, the FCS-4020 incorporates an SD/SDHC card slot so as to offer
temporary on-board recording.
Similar to the advanced features of LevelOne other cameras, the FCS-4020 includes, 3GPP mobile
surveillance, dual-codec, dual-stream, two-way audio via SIP protocol, digital I/O, 802.1X authentication
for network protection, and USB joystick for remote PTZ control. With the LevelOne FCS-4020, these
exceptional features provide efficient operational flexibility to meet customers’ needs in versatile
surveillance applications both outdoors and indoors.
Read Before Use
The use of surveillance devices may be prohibited by law in your country. The Network Camera is not
only a high-performance web-ready camera but can also be part of a exible surveillance system. It is
the user’s responsibility to ensure that the operation of such devices is legal and complies with all privacy
laws before installing this unit for its intended use.
It is important to rst verify that all contents received are complete according to the Package Contents
listed below. Take note of the warnings in the Quick Installation Guide before the Network Camera is
installed; then carefully read and follow the instructions in the Installation chapter to avoid damage due to
faulty assembly and installation. This also ensures the product is used properly as intended.
The Network Camera is a network device and its use should be straightforward for those who have basic
networking knowledge. It is designed for various applications including video sharing, general security/
surveillance, etc. The Configuration chapter suggests ways to best utilize the Network Camera and
ensure proper operations. For more creative and professional developers, the URL Commands of the
Network Camera section serves as a helpful reference to customizing existing homepages or integrating
with the current web server.
Package Contents
■ FCS-4020
■ Black Cover / Dome Cover
■ Power Adapter
■ Wall Mount Bracket
■ O-ring and Screws / Alignment Sticker
■ Silica Gel / Metal Ring
■ RJ45 Female/female Coupler
■ Quick Installation Guide
■ CD Manual / Utility

LevelOne
4 - User Manual
Physical Description
Inner View
Outer View
Reset Button
Lens
Status LED
SD/SDHC Card Slot
Ethernet 10/100
RJ45 Plug
Audio Out (green)
Microphone In (pink)
Power Cord Socket (black)
General I/O
Terminal Block
Ground

LevelOne
User Manual - 5
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin denitions are described below.
Pin Name Specification Remarks
GND Ground
DI4 Digital Input OPEN/Short-to-GND, isolation 2KV Internal pull-up
DI3 Digital Input OPEN/Short-to-GND, isolation 2KV Internal pull-up
DI2 Digital Input OPEN/Short-to-GND, isolation 2KV Internal pull-up
DI1 Digital Input OPEN/Short-to-GND, isolation 2KV Internal pull-up
GND Ground
N.O. Relay_NO Normal Open pin, Max 30VDC, 1A
COM. Relay_COM Common Pin , Max 30VDC, 1A
+12V Power +12V 12VDC ± 10%, max. 0.8A Max. rating 1.2A
DI/DO Diagram
Please refer to the following illustration for the connection method.
GND: Ground
DI4: Digital Input
DI3: Digital Input
DI2: Digital Input
DI1: Digital Input
GND: Ground
N.O. : RELAY_NO
COM. : RELAY_COM
+12V : Power, 12V DC
+12V
Digital input
Ground
Digital Input
+12V
Relay_NO
Power+12V
Relay_COM
Ground
Digital Output

LevelOne
6 - User Manual
Hardware Reset
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after rebooting, restore the factory settings and install again.
Reset: Press and release the reset button with a paper clip or thin object. Wait for the Network
Camera to reboot.
Restore: Press and hold the reset button until the status LED rapidly blinks red and green
simultaneously. Note that all settings will be restored to factory default.
SD Card Capacity
This network camera is compliant with SD/SDHC 16GB / 8GB and other preceding standard SD
cards.
Status LED
The color of LED indicates the status of the Network Camera.
Item LED status Description
1Steady Red Power on and system booting
Red LED unlighted Power off
2Steady Red + Blink Green every 1 sec. Network works (heartbeat)
Steady Red + Green LED unlighted Network fail
3 Steady Red + Blink Green every 2 sec. Audio mute (heartbeat)
4 Blink Red every 0.15 sec. + Blink Green every 1 sec. Upgrading Firmware
5 Blink Red every 0.15 sec. + Blink Green every 0.15 sec. Restore default
Reset Button

LevelOne
User Manual - 7
Installation
Hardware Installation
1. Attach the alignment sticker to the wall.
2. Drill four pilot holes into the wall.
3. Attach the black cover to the Network Camera using the four supplied black screws.
4. Stick the two pieces of supplied silica gel symmetrically to the inner side of the dome cover.
Then place the metal ring into the dome cover to x the silica gel.
5. Fix the dome cover to the Network Camera and secure it by rotating it clockwise.
6. Loosen the three screws on the front opening of the wall mount bracket.
7. Place the O-ring on the front opening of the wall mount bracket.
8. Feed the cables through the front opening of the wall mount bracket and pull them from wall
outlet.
9. Attach the Network Camera to the wall mount bracket by tightening the three screws on the
front opening of the wall mount bracket.
10. Fasten the wall mount bracket to the wall.
1
2
3
5
6
7
8
9
10
Silica gel
Silica gel
4

LevelOne
8 - User Manual
Network Deployment
Setting up the Network Camera over the Internet
This section explains how to congure the Network Camera over an Internet connection.
1. If you have external devices such as sensors and alarms, connect them to the general I/O
terminal block.
2. Use the supplied RJ45 female/female coupler to connect the Network Camera to a switch.
Use a Category 5 Cross Cable when Network Camera is directly connected to PC.
3. Connect the power cable from the Network Camera to a power outlet.
There are several ways to set up the Network Camera over the Internet. The rst way is to set
up the Network Camera behind a router. The second way is to utilize a static IP. The third way is
to use PPPoE.
Internet connection via a router
Before setting up the Network Camera over the Internet, make sure you have a router and follow
the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated below.
Regarding how to obtain your IP address, please refer to Software Installation on page 10 for
details.
IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
LAN (Local Area Network)
Router IP address : 192.168.0.1
WAN (Wide Area Network )
Router IP address : from ISP
Cable or DSL Modem
POW E R COLLISION
LINK
RECEI VE
PARTITI O N
12345
Internet
GND: Ground
DI4: Digital Input
DI3: Digital Input
DI2: Digital Input
DI1: Digital Input
GND: Ground
N.O. : RELAY_NO
COM. : RELAY_COM
+12V : Power, 12V DC
P
OWE
RC
OLLIS
ION
LINK
RE
CEIVE
PARTITION
12345
Ethernet Switch
2
1
1
3

LevelOne
User Manual - 9
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192.168.0.3, please forward the following ports for the Network Camera on the router.
■ HTTP port
■ RTSP port
■ RTP port for audio
■ RTCP port for audio
■ RTP port for video
■ RTCP port for video
If you have changed the port numbers on the Network page, please open the ports accordingly
on your router. For information on how to forward ports on the router, please refer to your
router’s user’s manual.
3. Find out the public IP address of your router provided by your ISP (Internet Service Provider).
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet. Please refer to Network Type on page 33 for details.
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera.
Please refer to LAN on page 33 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to
PPPoE on page 34 for details.

LevelOne
10 - User Manual
Software Installation
Installation Wizard (IW) , free-bundled software included on the product CD, helps you set up
your Network Camera on the LAN.
1. Install IW from the Software Utility directory on the software CD.
Double click the IW shortcut on your desktop to launch the program.
2. The program will search for all LevelOne network devices on the same LAN.
3. After searching, the main installer window will pop up. Click on the MAC and model name
which matches the product label on your device to connect to the Network Camera via
Internet Explorer.
00-11-6B-80-F1-3E 192.168.3.143 FCS-4020
00116B80F13E
Power : AC24V/2A
FCS-4020 H/W Ver:1.0
MAC:00116B80F13E
S/N:YYMMDDXXXXX
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.

LevelOne
User Manual - 11
Ready to Use
1. Access to the Network Camera from the Internet.
2. Retrieve live video through a web browser or recording software.
Please refer to page 12 for detailed information.

LevelOne
12 - User Manual
Accessing the Network Camera
This chapter explains how to access the Network Camera through web browsers, RTSP players,
3GPP-compatible mobile devices, and the LevelOne recording software.
Using Web Browsers
Use Installation Wizard 2 (IW2) to access to the Network Cameras installed on the LAN.
If your network environment is not the LAN, follow these steps to access the Network Camera:
1. Launch your web browser (eg. Microsoft®Internet Explorer, Mozilla Firefox, or Netscape).
2. Enter the IP address of the Network Camera in the address eld. Press Enter.
3. The live video will be displayed in your web browser.
4. If this is the rst time installing the LevelOne network camera, an information bar will pop up
as shown below. Follow the instructions to install the required plug-in on your computer.
NOTE
► For Mozilla Firefox or Netscape users, your browser will use Quick Time to stream the live
video. If you do not have Quick Time on your computer, please install it rst, then launch the
web browser.

LevelOne
User Manual - 13
► By default, the Network Camera is not password-protected. To prevent unauthorized access,
it is highly recommended to set a password for the Network Camera.
For more information about how to enable password protection, please refer to Security on
page 26.
► If you see a dialog box indicating that your security settings prohibit running ActiveX®
Controls, please enable the ActiveX®Controls for your browser.
1. Choose Tools > Internet Options > Security > Custom Level.
2. Look for Download signed ActiveX®controls; select Enable or Prompt. Click OK.
3. Refresh your web browser, then install the Active X® control. Follow the instructions to
complete installation.

LevelOne
14 - User Manual
Using RTSP Players
To view the MPEG-4 streaming media using RTSP players, you can use one of the following
applications that support RTSP streaming.
Quick Time Player
Real Player
VLC media player
mpegable Player
pvPlayer
As most ISPs and players only allow RTSP streaming through port number 554, please set the
RTSP port to 554. For more information, please refer to RTSP Streaming on page 46.
For example:
4. The live video will be displayed in your player.
For more information on how to configure the RTSP access name, please refer to RTSP
Streaming on page 46 for more details.
rtsp://192.168.5.151:554/live.sdp
Video 16:38:01 2008/01/03
1. Launch the RTSP player.
2. Choose File > Open URL. A URL dialog box will pop up.
3. The address format is rtsp://<ip address>:<rtsp port>/<RTSP streaming access name for
stream1 or stream2>

LevelOne
User Manual - 15
Using 3GPP-compatible Mobile Devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet. For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8.
To utilize this feature, please check the following settings on your Network Camera:
1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable.
For more information, please refer to RTSP Streaming on page 46.
2. As the the bandwidth on 3G networks is limited, larger video sizes are not available. Please
set the video and audio streaming parameters as listed below.
For more information, please refer to Audio and Video on page 52.
Video Mode MPEG-4
Frame size 176 x 144
Maximum frame rate 5 fps
Intra frame period 1S
Video quality (Constant bit rate) 40kbps
Audio type (GSM-AMR) 12.2kbps
3. As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554. For more information, please refer to RTSP Streaming on page 46.
4. Launch the player on the 3GPP-compatible mobile device (ex. Real Player).
5. Type the following URL commands in the player.
The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming
access name for stream1 or stream2>.
For example:
rtsp://192.168.5.151:554/live.sdp

LevelOne
16 - User Manual
Using LevelOne Recording Software
The product software CD also contains LevelOne recording software, allowing simultaneous
monitoring and video recording for multiple Network Cameras. Please install the recording
software, then launch the program to add the Network Camera to the Channel list. For detailed
information about how to use the recording software, please refer to the user’s manual of the
software or download the manual from http://www.level1.com.

LevelOne
User Manual - 17
Main Page
This chapter explains the layout of the main page. It is composed of the following sections:
LevelOne INC. Logo, Host Name, Camera Control Area, PTZ Control Panel, Conguration Area,
and Live video window.
LevelOne INC. Logo
Click this logo to visit the LevelOne website.
Host Name
The host name can be customized to t your needs. For more information, please refer to System on page
24.
Camera Control Area
Video Stream: This Network Camera supports MJPEG or MPEG-4 dual streams simultaneously. You can
select either one for live viewing.
Digital Output: Click to turn the digital output device on or off.
PTZ Control Panel
LevelOne INC. Logo
Live View Window
Camera Control Area
PTZ Control Panel
Configuration Area
Host Name
Left
Down
Zoom Out
Focus Near
Start to Auto Patrol
Start to Auto Pan
Stop Auto Panning/patrolling
Return to Home Position
Right
Up
Zoom In
Focus Far Auto Focus

LevelOne
18 - User Manual
Pan: Click this button to start the auto pan (360° continuous rotation).
Stop: Click this button to stop the Auto Pan and Auto Patrol functions.
Patrol: Once the Administrator has determined the list of preset positions, click this button to command
the camera to patrol among those positions on the Patrol List. The Network Camera will patrol
continuously. For more information, please refer to Camera Control on page 64
Pan /Tilt /Zoom /Focus speed: Adjust the speed of Pan/ Tilt/ Zoom/ Focus:
Conguration Area
Client Settings: Click this button to access the client settings page. For more information, please refer to
Client Settings on page 21.
Conguration: Click this button to access the conguration page of the Network Camera. It is suggested
that a password be applied to the Network Camera so that only the administrator can configure the
Network Camera. For more information, please refer to Conguration on page 23.
Language: Click this button to choose a language for the user interface. Language options are available
in: English, Deutsch, Español, Français, Italiano, 日本語, Português, 簡体中文, and 繁體中文.
Live Video Window
■ The following window is displayed when the video mode is set to MPEG-4:
Video and Audio Control Buttons Drop-down List of Preset Positions
MPEG-4 Protocol and Media Options
Video Title Time
Title and Time Video 10:23:18 2009/02/11
Pan speed Tilt speed Zoom speed Focus speed
-5 -5 -5 -5 Slower
Faster
-4 -4 -4 -4
-3 -3 -3 -3
-2 -2 -2 -2
-1 -1 -1 -1
0000
1111
2222
3333
4444
5555

LevelOne
User Manual - 19
Video Title: The video title can be congured. For more information, please refer to Video Settings on
page 52.
MPEG-4 Protocol and Media Options: The transmission protocol and media options for MPEG-4 video
streaming. For further conguration, please refer to Client Settings on page 21.
Time: Display the current time. For further conguration, please refer to Video Settings on page 52.
Title and Time: The video title and time can be stamped on the streaming video. For further conguration,
please refer to Video Settings on page 52.
Video and Audio Control Buttons: Depending on the Network Camera model and Network Camera
conguration, some buttons may not be available.
Snapshot: Click this button to capture and save still images. The captured images will be displayed
in a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP
(*.bmp) format.
Digital Zoom: Click and uncheck “Disable digital zoom” to enable the zoom operation. The navigation
screen indicates the part of the image being magnied. To control the zoom level, drag the slider bar. To
move to a different area you want to magnify, drag the navigation screen image.
Pause: Pause the transmission of the streaming media. The button becomes the Resume button
after clicking the Pause button.
Stop: Stop the transmission of the streaming media. Click the Resume button to continue
transmission.
Start MP4 Recording: Click this button to record video clips in MP4 file format. Press the
Stop MP4 Recording button to end recording. When you exit the web browser, video recording stops
accordingly. To specify the storage destination and the le name, please refer to MP4 Saving Options on
page 22 for details.
Volume: If the Mute function is not activated, move the slider bar to adjust the volume on the
local computer.
Mute: Turn off the volume on the local computer. The button becomes the Audio On button after
clicking the Mute button.
Talk: Click this button to talk to people around the Network Camera. Audio will project from
the external speaker connected to the Network Camera. Click this button again to end talking
transmission.
Mic Volume: When the Mute function is not activated, move the slider bar to adjust the
microphone volume on the local computer.
Mute: Turn off the Mic volume at local computer. The button becomes the Mic On button
after clicking the Mute button.
Full Screen: Click this button to switch to full screen mode. Press the “Esc” key to switch back to normal
mode.

LevelOne
20 - User Manual
Go to: Once the Administrator has determined the list of preset positions, you can aim the camera using
this command. For more information, please refer to Camera Control on page 64.
■ The following window is displayed when the video mode is set to MJPEG:
Video Title: The video title can be congured. For more information, please refer to Video Settings on
page 52.
Time: Display the current time. For more information, please refer to
Video Settings on page 52.
Title and Time: The video title and time can be stamped on the streaming video. For more information,
please refer to
Video Settings on page 52.
Video and Audio Control Buttons: Depending on the Network Camera model and Network Camera
conguration, some buttons may not be available.
Snapshot: Click this button to capture and save still images. The captured images will be displayed
in a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP
(*.bmp) format.
Digital Zoom: Click and uncheck “Disable digital zoom” to enable the zoom operation. The navigation
screen indicates the part of the image being magnied. To control the zoom level, drag the slider bar. To
move to a different area you want to magnify, drag the navigation screen image.
Start MP4 Recording: Click this button to record video clips in MP4 file format. Press the
Stop MP4 recording button to end recording. When you exit the web browser, video recording stops
accordingly. To specify the storage destination and le name, please refer to MP4 Saving Options on
page 22 for details.
Full Screen: Click this button to switch to full screen mode. Press the “Esc” key to switch back to normal
mode.
Go to: Once the Administrator has determined the list of preset positions; you can aim the camera using
this command. For more information, please refer to Camera Control on page 64.
Time
Video Title
Title and Time Video 10:11:50 2008/01/09
Video Control Buttons Drop-down List of Preset Positions