Levenhuk DTX 90 User manual

Levenhuk DTX 90
5
MEGA
PIXELS
USB 2.0
300x
Digital Microscope
User Guide
EN CZ PL RU

Levenhuk DTX
www.levenhuk.com
DTX 30
DTX 50
DTX 90
DTX 500 Mobi
DTX 500 LCD
Software
Photo/video capturing
and micromeasuring software
for Levenhuk Digital Microscopes
+ user manuals
Windows/Mac
Цифровой микроскоп
Levenhuk DTX 90
Инструкция по эксплуатации
5
MEGA
PIXELS
USB 2.0
300x
Levenhuk DTX 90
The kit includes
Digital microscope
Never, under any circumstances, look directly at the Sun, another bright source of light
or at a laser through this device, as this may cause PERMANENT RETINAL DAMAGE
and may lead to BLINDNESS.
EN
Microscope Mount Levenhuk DTX
installation CD
User Guide Calibration scale
1

Microscope parts
6. Mount locking ring
7. Shutter button (works in MS Windows only)
8. B rightness adjustment wheel
9. USB cable
10. Stage
1. Coarse focus knob
2. Focus lock knob
3. Fine focus knob
4. Mount arm locking knob
5. Locking screw
2

Microscope assembly
Take the microscope and all accessories out of the package. Place the stage on a stable surface.
Attach the mount locking ring (6) to the metal tube of the mount. Insert the metal tube into
the opening on the stage and lock it in place with the ring (6).
Insert the microscope into the clamp on the mount arm and tighten the locking screw (5).
Tighten the locking knob (4) to lock the mount arm in place.
Focusing
Place a specimen on the stage and use the coarse focus knob (1) to focus your view.
Use the fine focus knob (3) for maximum precision and sharpness.
Upon focusing your view, tighten the focus lock knob (2) to lock the results.
3

PortableCapture Pro software
Software installation
Insert the installation CD into your CD drive. The Main Menu window will be displayed. Select
PortableCapture software to install the PortableCapture Pro application. Keep in mind that a system
restart will be required during installation.The installation CD contains a copy of this User Guide,
which you can read by clicking the corresponding entry in the Main Menu.
First steps
Connect the microscope to your PC with a USB cable and run the PortableCapture Pro application.
A pop-up message will warn you if the microscope is not connected to the PC.
Toolbar icons
Capture an image Start and stop
video recording Sequence capture (you can set
the time to begin capturing
images or videos, interval
between them, video duration
and the number of images
or videos to be captured)
Full screen mode.
To exit full screen mode,
press Escape your keyboard
or double-click anywhere
on the screen
4

File
Photos Directory: set a directory for captured images.
Videos Directory: set a directory for recorded videos.
Options
Resolution: set image resolution.
Date/Time: hide or display date and time of capture during preview.
Language: change the language of the user interface.
X (Grid): hide or display a grid on images.
Full screen mode: go full screen.
Capture
Photo: capture an image.
Video: record a video.
Menu
5

Preview window toolbar
Save as Copy to clipboard Copy file
Previous image Next image Undo the last action Repeat the last action
Draw Text Measurement Calibration
6

Capturing an image
Click the corresponding icon on the toolbar or select
Photo from the Capture menu.
Recording a video
Click the corresponding icon on the toolbar or select
Video from the Capture menu.
Using the application
7

Sequence capture
Click the corresponding icon on the toolbar. A dialog window
will appear where you can set a number of parameters
for sequence capture.
Click the Photo radio button to set the time to begin
capturing images, interval between them and the total
number of images.
Click the Video radio button to set the time to begin
recording videos, their duration, interval between them
and the total number of clips.
8