Levoit LV600B User manual

Questions or Concerns?
Please contact us Mon-Fri 9:00AM-5:00PM PST
at [phone] or email [email protected]
Hybrid Ultrasonic Humidifier
Model: LV600HH

Thank you for purchasing the Hybrid Ultrasonic Humidifier by Levoit. We
are dedicated to providing you with quality products so that you can see a
better you. Should you have any questions or concerns about using your
new product, feel free to reach out to our helpful customer support team
at (888)-726-8520 or by email at [email protected]. We hope you enjoy
your new product!
Thank You.

Table of Contents
Safety Information
Main Functions
Set-Up
Operation
Care & Maintenance
Troubleshooting
Specifications
Customer Support
Warranty Information
3
4
6
7
10
13
14
15
16

3
Safety Information
IMPORTANT: Please read, understand, and comply with all of the instructions provided in this
manual before using the device. Failure to comply with the instructions given in this manual
and/or using the device in ways other than the ones mentioned in this manual may result in
serious injury and/or damage to the product.
• Ensure that the plug fits properly into a polarized power socket.
• Always disconnect from a power source by pulling the plug when not in use.
• DO NOT use this product in wet environments.
• DO NOT use your hand or any other object to cover the nozzle while the unit is on. Doing
so may damage the product or cause injury.
• DO NOT clean the unit while it is connected to a power source or while it is on.
• Remove the water tank from the base before moving the humidifier.
• DO NOT clean the device right after turning it o, especially after is has been diusing
warm mist. Allow the humidifier to completely cool down before cleaning.
• DO NOT place the humidifier near sources of heat, such as stove tops, ovens, radiators or
computers.
• DO NOT place the humidifier near any large pieces of furniture or in any high-trac area
where it can be easily knocked over.
• Unplug the unit when not in use, or while cleaning it out.
• DO NOT use cleaning detergents to clean the humidifier; only use distilled white vinegar.
• DO NOT plug in the unit with wet hands.
• DO NOT place foreign objects into the unit’s base or water tank. Do not use other items as
replacement parts for this product.
• Keep the machine out of reach from children.
• Only use this humidifier as described in this manual.
• Contact customer service if the unit is damaged or if it is not functioning properly.

4
1. Nozzle
2. Handle cover
3. Handle
4. Water tank
5. Water tank cap
6. Water level sensor
7. Base
8. Air flume
9. Mist tube
10. Atomization chip
11. Descaling pad
12. Heating element
13. Inner chamber
14. Power cord
15. Aroma box
Main Functions
2
7
14
13
8
5
3
4
6
9
11
15
10
12
1

5
16. LED display
17. On/O button
18. Mist level button
19. Humidity level button
20. Timer button
21. Warm mist button
22. AUTO button
23. Remote control
1. Relative humidity (RH)
level indicator
2. Cool mist humidity level
3. Timer setting
4. Warm mist humidity
level
5. AUTO mode indicator
6. Low water level
7. High temperature
warning
8. Set humidity function
17
18 21
5
6
22
2
4
3
1
7
8
16
19 20
23

6
Set-Up
NOTE:
• DO NOT add water through the mist tube, doing so will damage the device.
• Only fill the water tank with cold or room temperature water.
1. Remove the handle cover and set aside.
Carefully lift the handle to remove water
tank from the base.
2. Flip the tank over and unscrew the
water tank cap.
3. Fill the tank with at least 2 cups (480
mL) of cold or room temperature water.
Replace the cap once you have filled
the tank to your desired level.

7
Operation
NOTE: For added convenience, the same button
controls can be found on the included remote
control.
NOTE: The default setting when you first turn on
the humidifier is the medium cool mist setting.
humidifier.
Press to cycle through the
humidifier’s 3 cool mist
settings.
•1:Low mist setting
•2:Medium mist setting
•3:High mist setting
Button Controls
4. Carefully place water tank back onto
the base, making sure that the tank is
properly aligned. Replace the handle
cover.
5. Plug the humidifier into an electrical
outlet. The unit will chime indicating it is
in standby mode.
Tips
1. If the relative humidity in your room
exceed 68%RH, it is recommended to
use Low mist level or turn the device
2. It is recommended to adjust the
setting based on your room's relative
humidity, room size and indoor
temperature.

8
Use the humidity level button to
program the humidifier to work
toward a set humidity level.
Press the timer button to set
the timer anywhere from 1 to 12
hours. When you have selected
your desired time, the display
will flash three times before
the time is set. The device will automatically
pressing the timer button until the display
flashes “C.”
1. Press the humidity level button once
to activate this function; keep pressing
the humidity level button to select your
desired humidity level (the device can
be programmed from 40-80% RH).
2. Once you have selected your desired
humidity, the display will flash 5 times
confirming your selection.
3. The device will start producing mist and
will automatically stop operating once
the programmed humidity level has
been reached.
4.
To cancel this function, press the
humidity level button until the screen
flashes “- -”.
NOTE:
•The programmed humidity level can be
changed at anytime by pressing the humidity
level button.
•When the programmed humidity level is
reached, the RH level indicator will continue
to count up for about 2 minutes. This is due to
the device sensing the relative humidity in the
surrounding.