Levoit LV6S User manual

LV6S Smart Hybrid
Ultrasonic Humidifier
Questions or Concerns?
Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT
at [email protected] or at [phone].
English only
USER MANUAL
ITM. / ART. 2634499

2
Table of Contents
Package Contents
Specifications
Safety Information
Getting to Know Your Smart Humidifier
Controls & Display
Getting Started
Filling & Refilling
VeSync App Setup
Using Your Smart Humidifier
Important Tips
Care & Maintenance
Troubleshooting
Warranty Information
Customer Support
2
2
3
6
8
9
10
11
12
17
17
22
27
29
Package Contents
Bonus Items
Smart Hybrid Ultrasonic Humidifier
Aroma Pad (1 Pre-Installed)
Absorption Pad (1 Pre-Installed)
Water Filter Sponge (1 Pre-Installed)
Cleaning Brush
User Manual
Quick Start Guide
Remote Control
3V CR2025 Battery (Pre-Installed)
Specifications
Model LUH-A602S-WUSC
Power Supply AC 120V, 60Hz
Rated Power 280W
Water Tank
Capacity
1.58 gal / 6 L
Max Cool
Mist Output
300 mL/h
Max Warm
Mist Output
550 mL/h
Max Runtime 50 hours on low mist
setting
Note: The humidifier
may run for a longer or
shorter time depending
on the environmental
temperature and
humidity.
Noise Level Lowest: < 28dB (Low
Cool Mist)
Highest: < 40dB (High
Warm Mist)
Eective
Range
430–753 ft² / 40–70 m²
Dimensions 11.5 x 7.6 x 11.2 in /
29.2 x 19.3 x 28.8 cm
Weight 5.6 lb / 2.6 kg
1 x
3 x
3 x
2 x
1 x
1 x
1 x
1 x
1 x
Note: To access additional smart humidifier
functions, download the free VeSync app
(see page 11).

3
SAFETY INFORMATION
• Only use the humidifier as described in
this manual.
• Place the humidifier and cord so that it
will not be knocked over. Do not place
near large pieces of furniture or in high-
trac areas.
• When not in use, turn the humidifier
o and disconnect from power by
removing the plug from the outlet.
• Do not use the humidifier in wet
environments.
• Keep the humidifier out of reach from
children.
• Do not open the base or remove the
water level sensor for self-servicing.
• Always unplug your humidifier from
the power outlet before cleaning or
detaching the water tank from the
humidifier base.
• Always make sure to place the
humidifier on a flat, level surface before
operation.
• Only fill the water tank with clean water.
Never fill the water tank with any other
liquids.
• Do not place the humidifier near
sources of heat, such as stovetops,
ovens, or radiators.
• Do not place the humidifier directly on
floors, carpets, or rugs.
• Do not use other items as replacement
parts for this product.
To reduce the risk of fire, electric shock, or other injury, follow all instructions and
safety guidelines.
General Safety • Do not cover the nozzles while the
humidifier is on. Doing so may damage
the humidifier.
• Remove the water tank from the base
before moving the humidifier.
• Do not immerse the humidifier base,
power cord, or plug in water.
• Do not clean the humidifier immediately
after turning it o, especially if it has
been diusing warm mist. Allow the
humidifier to cool down completely
before cleaning.
• If the humidifier is damaged or is not
functioning properly, stop using it and
contact Customer Support immediately
(see page 29).
• This humidifier is not to be used by
persons (including children) with
reduced physical, sensory, or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Supervise children when they are near
the humidifier.
• Children should not clean or perform
maintenance on the humidifier without
supervision.
• Children should be supervised to
ensure that they do not play with the
humidifier.
• Not for commercial use. Household use
only.
READ AND SAVE
THESE INSTRUCTIONS

4
• Ensure that the plug fits properly into a
polarized socket.
• Do not handle the power cord or plug
with wet hands. Keep the plug and power
cord away from liquids.
• Your humidifier has a polarized plug (one
prong is wider than the other), which fits
into a polarized outlet only one way. This
is a safety feature to reduce the risk of
electric shock. If the plug does not fit,
reverse the plug. If it still does not fit,
do not use the plug in that outlet. Do not
bypass this safety feature.
• If the power supply cord is damaged, it
must be replaced by Arovast Corporation
or similarly qualified persons in order to
avoid an electric or fire hazard. Please
contact Customer Support
(see page 29).
• Unplugging the power cord will disable
remote control of the humidifier and
temporarily disconnect the humidifier
from VeSync and other third-party apps.
Power & Cord
This product contains a
coin/button battery.
SAFETY INFORMATION (CONT.)
• Do not add essential oils,
supplemental water treatment
liquids, or water filters into the
water tank or base chamber. This
will damage the humidifier and
cause leaks. Only add essential
oils to the aroma pad.
Caution: Risk of Leaks and
Electric Shock
WARNING: CHEMICAL BURN
HAZARD. KEEP OUT OF REACH
OF CHILDREN.
Swallowing can lead to chemical burns,
perforation of soft tissue, and death. Severe
burns can occur within 2 hours of ingestion.
Seek medical attention immediately.
• Dispose of the battery immediately
according to local regulations;
• Store spare batteries securely;
• Use non-transparent containers to keep
the batteries out of view.
Unfortunately, it is not obvious when a
button or coin battery is stuck in a child’s
oesophagus (food pipe). The child might:
• Cough, gag or drool a lot;
• Appear to have a stomach upset or a
virus;
• Be sick;
• Point to their throat or stomach;
• Have a pain in their abdomen, chest or
throat;
• Be tired or lethargic;
• Be quieter or more clingy than usual or
otherwise “not themselves”;
• Lose their appetite or have a reduced
appetite;
• Not want to eat solid food / be unable to
eat solid food.

5
This humidifier complies with all standards
regarding electromagnetic fields (EMF).
If handled properly and according to the
instructions in this user manual, the appliance
is safe to use based on scientific evidence
available today.
Electromagnetic Fields (EMF)
These sorts of symptoms vary or fluctuate,
with the pain increasing and then subsiding.
A specific symptom to button and coin
battery ingestion is vomiting fresh (bright
red) blood. If the child does this seek
immediate medical help.
The lack of clear symptoms is why it is
important to be vigilant with “flat” or
spare button or coin batteries in the home
and the products that contain them. Be
aware that even used button or coin
batteries may cause injury

6
GETTING TO KNOW YOUR
SMART HUMIDIFIER
A. Nozzles
B. Top Cover
C. Handle
D. Water Tank
E. Water Filter
F. Water Filter Sponge
G. Base
H. LED Display
I. Control Panel
J. Aroma Box
K. Aroma Pad
L. Humidity Sensor
(In Aroma Box
Compartment)
Underside
of water tank
Top view of
inner chamber
Front Back
M. Mist Tube
N. Mist Channel
O. Noise Silencer
P. Absorption Pad
Q. Air Outlet
R. Float Brackets
S. Base Chamber
T. Power Cord
U. Water Outlet Valve
V. Heating Element
W. Transducer
X. Float
Y. Remote Control
AM
N
V
X
W
O
P
B
C
D
U
G
E
F
J
L
Y
K
H
Q
S
R
T
I
Function Diagram

7
H. On/O Button
I. Mist Level Button
J. Humidity Level Button
K. Warm Mist Button
A. Sleep Mode Indicator
B. Timer Indicator
C. Wi-Fi® Indicator
D. No Water Indicator
E. Relative Humidity (RH) Percentage
F. Warm Mist Setting Indicator
G. Mist Level Indicator
H K
I
G F
A C
B
D
E
J
Indicators Buttons
GETTING TO KNOW YOUR SMART HUMIDIFIER (CONT.)
Low Mist
Medium Mist
High Mist
Heat O (Cool Mist)
Low Heat
Medium Heat
High Heat
Mist Level Indicator (Blue) Warm Mist Indicator (Orange)

8
CONTROLS & DISPLAY
On/O Button
• Tap to turn the humidifier
on/o.
• Press and hold for 5
seconds to pair with the
VeSync app. See the
VeSync in-app instructions
for more information.
• Press and hold for 15
seconds to reset the
humidifier. This will restore
the humidifier’s default
settings and disconnect it
from Wi-Fi® and the VeSync
app (see page 11).
Mist Level Button
• Tap repeatedly to cycle
through mist level settings:
low, medium, and high mist.
• Press and hold for 3
seconds to turn the display
o. Tap any button to turn
the display back on.
• To turn display o:
Press and hold for 3
seconds. Tap any button to
turn the display back on.
Warm Mist Button
• Cycles through warm mist
settings: low heat, medium
heat, high heat, and heat o
(see page 13).
Humidity Level Button
• Sets the relative humidity
(RH) percentage. The
humidifier will automatically
stop misting when the room
reaches the target humidity
level (see page 13).
• Press and hold for 2
seconds to cancel your
humidity level setting.
Timer Button
• Sets or cancels a timer (see
page 14).
• Can only be controlled
through the remote control
or VeSync app.
Sleep Mode Button
• Press to turn Sleep Mode
on/o (see page 14).
• Can only be controlled
through the remote control
or VeSync app.
Wi-Fi Indicator
• Turns on, o, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
No Water Indicator
• Blinks when there is no
water in the tank. After this
indicator blinks 10 times, the
humidifier will turn o. Refill
the tank and properly place
it on the base to use your
humidifier.
• Lights up when the
water tank is removed.
Remains on until the tank is
replaced.
Remote Control
The remote control can be used to control
any of the humidifier’s functions from a
distance. It must be within 16 ft / 5 m of the
humidifier to work.
Note: You can also use the VeSync app to control these functions, as well as additional
app-only features (see page 16). These controls are also on the included remote control.
Note:
• Remove the plastic tab from the
remote control’s battery compartment
before using.
• To replace the battery, see page 20.

9
GETTING STARTED
1. Remove all packaging.
2. Clean the water tank and water tank
cover before first use.
Note: Check to make sure that the
water filter is correctly in place. If not,
then rotate the filter clockwise to secure
it in place.
Note: The humidity sensor and an air
inlet are both located inside the aroma
box. Placing the humidifier away from
walls will also ensure that the inlet and
sensor function properly.
Figure 1.1
3. Choose a hard, flat location for the
humidifier at least 12 inches / 30 cm away
from any walls. The surface must be
water-resistant. [Figure 1.1]
• Do not place the humidifier directly
on floors, carpets, or rugs.
4. Mist should be directed away from walls,
furniture, bedding, and appliances. Avoid
letting too much mist fall on the side of
the humidifier with the aroma box, as this
may interfere with the sensor inside the
aroma box.
12 in /
30 cm
12 in /
30 cm

10
FILLING & REFILLING
1. Remove the water tank cover.
2. Use the handle to remove the tank
from the base. Fill the tank with room-
temperature water. Do not fill with hot
water.
Note: Make sure the water tank is clean
before filling.
Figure 2.1
Figure 2.4
Figure 2.3 Figure 2.5
Figure 2.2
Do not add water directly into the
base chamber. [Figure 2.2]
Do not add essential oils into the
humidifier. Only add essential oils
to the aroma pad. [Figure 2.4]
Do not use water treatment liquids
or third-party water filters in this
humidifier. [Figure 2.5]
Do not add water through the
mist tube. [Figure 2.3]
Caution
Note:
• We recommend using purified
water to fill the tank.
• Using tap water may result in a
white dust (dried minerals) on
surfaces.
3. Replace the water tank cover and place
the tank back on the base. [Figure 2.1]

11
VESYNC APP SETUP
1. To disconnect Wi-Fi, press and hold
for 15 seconds until the Wi-Fi
indicator turns o. This will restore the
smart humidifier’s default settings and
disconnect it from the VeSync app.
2. To reconnect, please follow the
instructions in the VeSync app for
adding a device.
1. To download the VeSync app, scan
the QR code or search “VeSync” in the
Apple App Store® or Google Play Store.
Wi-Fi Connection
Note:
• You can use the VeSync app to
connect your smart humidifier
to Amazon Alexa or Google
Assistant™. Follow the in-app
instructions to connect VeSync to
your voice assistant.
• Your phone must have
Location turned on while
your phone is connecting to
your smart humidifier. This
is required to establish the
Bluetooth® connection. You can
turn Location o after your smart
humidifier is finished connecting to
the VeSync app.
Note: Due to ongoing updates and
improvements, the VeSync app may be
slightly dierent than shown in the manual.
In case of any dierences, follow the in-app
instructions.
Note: For Android™ users, choose
“Allow” to use VeSync.
Note: You must create your own
VeSync account to use third-party
services and products. These will not
work with a guest account. With a
VeSync account, you can also allow
your family and friends to control your
smart humidifier.
2. Open the VeSync app. If you already
have an account, tap Log In. To create a
new account, tap Sign Up.
3. Follow the in-app instructions to set up
your smart humidifier.

12
USING YOUR SMART HUMIDIFIER
1. Plug in the humidifier. The humidifier will
light up, then turn o.
2. Tap to turn your humidifier on. The
humidifier will start misting.
Figure 3.1
Note:
• Direct the nozzles away from any
furniture, walls, or other objects to
prevent them from getting wet.
• Do not inhale the mist directly from
the nozzles.
Note: Using the VeSync app allows you to
control your smart humidifier remotely and
access additional functions and features
(see page 16).
Note: If there is no water in the tank,
will flash 10 times, and the humidifier will
turn o. Fill the water tank (see Getting
Started, page 9).
Note: You can also set the humidifier
to automatically stop misting when the
room reaches a specific humidity level
(see Humidity Level, page 13).
3. Tap repeatedly to cycle through mist
settings: Low, Medium, and High.
4. Rotate the nozzles to adjust the direction
of the mist. [Figure 3.1]
5. Optionally, use the controls or the VeSync
app to turn on warm mist, activate
Sleep Mode, and more (see Controls &
Display, page8).
6. When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it o.
A comfortable humidity level is between
40% and 60%.
7. Tap to turn your humidifier o.

13
• Tap to turn on warm mist. Keep
tapping to increase the heat setting for
the mist, and to turn warm mist o.
• Caution: Mist may be hot. Do not place
your bare hands, face, or other exposed
skin over the nozzles while using warm
mist. [Figure 3.2]
• The humidifier may take 15 minutes to
warm up before producing warm mist.
• The warm mist function can be used
during Sleep Mode.
1. Tap repeatedly to set a humidity
level between 40% and 80% Relative
Humidity (RH).
2. The display will flash 3 times to confirm
your selection, then return to showing
the current humidity percentage in the
room.
USING YOUR SMART HUMIDIFIER (CONT.)
You can customize the humidity level that
the humidifier will maintain. The humidifier
will automatically stop misting when the
room reaches the target humidity level.
Humidity Level
Warm Mist Note:
• The humidifier will automatically
mist for 15 seconds after being
turned on, even if the room has
reached the set humidity level.
• Ta p once to see the selected
humidity level again. Keep tapping
to change the humidity level.
• You can still adjust the mist level,
the timer, and the warm mist setting
after setting the humidity level.
• The humidifier will not increase the
mist level when a humidity level
percentage is set, only stop misting
once the set humidity level is
reached. If you want the humidity in
your room to increase faster, set the
humidifier to high mist level.
Note:
• To cancel the set humidity level,
press and hold for 2 seconds,
which will set the humidity level to
“--”. The display will flash 3 times
to confirm, then return to showing
the current humidity percentage in
the room.
• When the humidity level is set to
“--” the humidifier will automatically
keep misting at the current mist
level until it runs out of water.
Figure 3.2
3. Once the humidity of the environment
reaches the humidity you set, the
humidifier will automatically stop misting.
4. The humidifier will continue detecting
the humidity level in the room. It will
start misting again when the humidity
drops to 5% below the set level.

14
USING YOUR SMART HUMIDIFIER (CONT.)
Figure 3.3
You can set an auto-shuto timer between
1 and 12 hours.
Note: Timer can only be controlled through
the remote control or VeSync app.
Note: Sleep Mode can only be controlled
through the remote control or VeSync app.
Sleep Mode changes the humidifier’s mist
setting to an automatic mode and turns o
the display lights.
Timer
Sleep Mode
• Press repeatedly on the remote
control to choose a time in increments
of 1 hour. When you stop pressing ,
the display will flash 3 times and the
timer will start.
• The humidifier will automatically power
o once the timer is finished.
• To cancel a timer, press and hold
for 3 seconds. You can also press
repeatedly until the display reads “--” or
use the VeSync app.
• Press on the remote control to turn
Sleep Mode on/o.
• Sleep Mode automatically turns o
warm mist to reduce noise. You can
press to turn warm mist back on.
• Sleep Mode uses the humidity sensor to
detect the relative humidity in the room
and automatically adjusts the mist level
to maintain 50–60% relative humidity.
• When Sleep Mode is on, you can tap
or press any button to wake up the
display. If you stop touching the display,
the display will turn o again after 6
seconds.
• When Sleep Mode is on, you can use all
other settings except changing the mist
level or humidity level. If you change the
mist level or humidity level, Sleep Mode
will turn o.
• When Sleep Mode is turned on, the
humidifier will automatically mist for 15
seconds, even if the room’s humidity
level is over 60%.
Room Relative
Humidity
Automatic Mist Level
Under 50% High
50–55% Medium
55–60% Low
Over 60% Automatic Shuto
The display will automatically dim after 30
seconds of inactivity.
• To turn o the display, press and hold
for 3 seconds.
• To turn the display back on, tap any
button.
• You can also press on the remote
control to turn the display on/o.
[Figure 3.3]
Turning Off the Display

15
Your humidifier can be used for
aromatherapy.
Using the Aroma Box
1. Push the aroma box at the back of the
base and pull it out. [Figures 3.4]
2. Put 8–10 drops of essential oils on the
aroma pad. [Figure 3.5]
3. Place the aroma box back into the
humidifier.
4. Turn on the humidifier. The humidifier
will automatically diuse aroma when
used.
Note:
• Do not add essential oils, water
treatment liquids, or third-party water
filters into the water tank or base
chamber. Only add essential oils to the
aroma pad. [Figure 3.6]
• The aroma pads can be cleaned and
reused after diusing essential oils (see
Cleaning the Aroma Pad, page 20).
• This humidifier uses a small heat-based
aroma diuser. The aroma is intended
to be light.
Figure 3.4
Figure 3.5
Figure 3.6
USING YOUR SMART HUMIDIFIER (CONT.)

16
• The humidifier will remember your
settings for Mist Level, Humidity Level,
Warm Mist, and Wi-Fi settings when
turned o or unplugged, and will
resume those settings when turned
back on.
• The humidifier will not remember Sleep
or Timer settings, and the display will
automatically turn back on when the
humidifier is turned back on.
The humidifier will automatically turn o
when all of the water in the tank has been
diused. will show on the display and
blink 10 times before the humidifier turns
o. Fill the water tank (see Getting Started,
page 9).
If the tank has been removed from the base,
the humidifier will automatically stop misting.
will show on the display, and will turn o
once the tank is placed properly back on
the base.
The mineral absorption pads help reduce
mineral buildup (scale) inside the humidifier,
especially on the heating element.
Memory Function
Automatic Shutoff
Absorption Pads
Note: For information on replacement
aroma pads or absorption pads, see
page 20.
The VeSync app allows you to access
additional smart functions, including those
listed below.
VeSync App Functions
Remote Control From Your Phone
• Turn the humidifier on/o.
• Cycle through mist levels and heat
levels, and turn Sleep Mode on/o.
• Turn the display lights on/o.
Monitor Humidity Levels
• Check current humidity levels in the
humidifier’s environment.
Set Timers & Schedules
• Program individual timers or create a
schedule for your smart humidifier.
Third-Party Voice Control
• Compatible with Amazon Alexa and
Google Assistant™ for voice commands.
Note: The VeSync app is continually updated and
app features will expand.
USING YOUR SMART HUMIDIFIER (CONT.)

17
Your humidifier must have the correct level
of water in the base chamber to work
properly. If there is too much water in the
base chamber, the humidifier cannot create
mist.
Figure 4.1
IMPORTANT TIPS
• Do not place the humidifier on an
inclined surface.
• Never pour water directly into the
base chamber. [Figure 4.1] Only add
water to the water tank. The humidifier
will automatically release the correct
amount of water into the base chamber.
• Avoid moving or shaking the humidifier.
This may cause the water tank to
release too much water into the base
chamber.
• Before moving the humidifier, turn it o,
unplug it, and remove the water tank.
Empty any excess water from the base
chamber.
Note: If you’ve been using the warm
mist setting, allow the humidifier to cool
before cleaning.
CARE & MAINTENANCE
Note:
• All maintenance should be done on
a water-resistant surface, such as a
kitchen counter.
• Change the water daily to avoid
bacteria growth.
• Use a tissue or cloth to clean the
nozzles regularly.
• If not using the humidifier for 3 days or
longer, do not leave water inside. Clean
and dry the humidifier instead.
Note:
• Never immerse the base in water or
liquid. Do not place any part of the
humidifier in a dishwasher.
• Do not use detergents to clean the
humidifier.
Cleaning
You should clean your humidifier water tank
and base chamber every 3 days, and when
you’re ready to store it.
1. Unplug the humidifier.

18
2. Remove and rinse the water tank cover.
3. Remove the water tank from the base,
and remove the mist channel and mist
tube. [Figure 5.1] Pour out any water from
the tank and base chamber. If you’ve
used the warm mist setting, use caution
in case the water is still hot.
Figure 5.1
Figure 5.2
Figure 5.4
Figure 5.3
Note: When pouring out water, hold
down the float to ensure that it does
not fall out of the base chamber.
4. Remove the water filter from the tank by
rotating it counterclockwise and lifting it
out. [Figure 5.2]
5. Remove the water filter sponge from
the water filter if necessary for cleaning.
[Figure 5.3]
Aroma box Absorption pad
Noise SilencerFloat
6. Detach the mist tube from the
mist channel by twisting the tube
counterclockwise. [Figure 5.1]
7. Remove the float, noise silencer,
absorption pad, and aroma box from the
base. [Figure 5.4]
CARE & MAINTENANCE (CONT.)

19
CARE & MAINTENANCE (CONT.)
8. Detach the outer water outlet valve from
the tank by rotating it counterclockwise.
[Figure 5.5]
9. Rinse all parts (except the outside of the
base) with room temperature water.
10. To descale the humidifier (remove
mineral buildup):
a. Remove the water filter and the
water outlet valve from the tank.
Remove the noise silencer and
absorption pad from the base. Keep
the mist tube and mist channel in
place.
b. Fill the tank with 3 US cups / 710 mL
of distilled white vinegar.
c. Replace the tank cover and swish
the vinegar around the tank.
d. Place the tank on the base and soak
for 15–20 minutes. Vinegar will drain
into the base chamber and loosen
scale (mineral buildup) in the tank
and in the base chamber (including
the transducer and float).
e. Remove the tank, remove the tank
cover, and pour out any vinegar.
f. Remove the float from the base
chamber by pulling up the larger
side of the float and pulling the shaft
out from the float brackets. One
side of the float brackets is open
(U-shaped) to allow the shaft to be
removed. [Figure 5.6]
g. Place the float, water filter, water
outlet valve, aroma box, and noise
silencer in a container. Fill with
enough vinegar to cover them. Soak
for 15–20 minutes.
h. Use a soft cloth and the included
cleaning brush to remove scale from
all parts. [Figure 5.7]
i. Rinse all parts until any vinegar smell
is completely gone.
Figure 5.6
Figure 5.5
Do not allow liquid
into the air outlet
Figure 5.7
11. Dry all parts with a cloth. Make sure
all parts are completely dry before
reassembling or storing.

20
CARE & MAINTENANCE (CONT.)
Figure 5.8
Figure 5.9
Figure 5.10
Cleaning the Aroma Pad &
Absorption Pad
Note: Do not use liquid cleaners or
detergents to clean the pads or any
other part of the humidifier.
1. Pull out the aroma box and remove the
aroma pad. [Figure 5.8]
2. Remove the noise silencer, then remove
the absorption pad from on top of the
heating element. [Figure 5.9]
3. Rinse the pads under warm, running
water.
4. Dry the pads with a clean cloth.
5. Place the aroma pad back into the
aroma box.
6. Place the absorption pad back into the
base.
Replacing the Aroma Pad &
Absorption Pad
If the aroma pad or absorption pad is sti
even after cleaning, then it needs to be
replaced. Extra pads are included with the
humidifier.
To maintain the performance of your
humidifier, only use ocial Levoit aroma
pads and absorption pads. For more
information, contact Customer Support
(see page 29).
1. Remove the battery compartment by
pinching the tab in and pulling the
compartment out. [Figure 5.10]
2. Remove the old battery.
3. Replace with a new 3V CR2025 battery.
Make sure the polarities match.
4. Replace the battery compartment.
5. Dispose of the old battery according to
your local laws and regulations.
Replacing the Remote Control
Battery
Pinch
Pull out