
Lueta Nr. 319, Romania
+40758576007
www.levtech.ro
1. CONNECT TO THE DEVICE
1
3
2
4
5
Press the button through the hole at the bottom of
the device.
If the battery in the remote control is not completely
discharged, the green LED will light up.
Turn on Wi-Fi on your phone/laptop.
Find the TQC_remote network.
Connect to the TQC_remote network.
The password for the network: 123456789
After connecting, scan the QR code on the product.
If the scan does not work, open a browser and enter
the IP address 192.168.4.1 in the search bar.
After opening the website, this interface welcomes
you, where you can choose whether the remote
control is connected to the pump by cable or
infrared.
The LED at the bottom of the device is:
- green when a cable connection is selected
- red when infrared connection is selected.
Here you can also see the state of the battery
expressed as a percentage.
123456789