Lexmark 3100 Series User manual

www.lexmark.com
Make sure your
computer is on. Connect the power supply.
Lift the paper support and extend the paper
exit tray. Load plain paper and adjust the paper guide. Lift the scanner unit.
For more help:
1Refer to your User’s Guide.
2Visit our Web site:
http://support.lexmark.com/
3Call us at [phone].
Monday–Friday (9:00 A.M.–9:00 P.M. EST)
Saturday (Noon–6:00 P.M. EST)
Phone number and support times may change without notice.
Safety information
•Use only the power supply provided with this product, or the
manufacturer’s authorized replacement power supply.
•Connect the power supply to an electrical outlet that is near the product
and easily accessible.
•Refer service or repairs, other than those described in the user
documentation, to a professional service person.
CAUTION: Do not use the fax feature during a lightning storm. Do not set up
this product or make any electrical or cabling connections, such as the
power cord or telephone, during a lightning storm.
©2003 Lexmark International, Inc. All rights reserved.
P/N 16T0070 EC 6T0002
1
2
3100 Series All-In-One
12 Make sure the power
light is on.
3
456

2
Remove the storage unit, sticker, and tape
from the print cartridges. Insert and then snap in the print cartridges. Close the scanner unit.
Connect the USB cable. Insert the CD. Follow the instructions on
the screen to install the software.
Important!
Click Cancel on all Add New Hardware screens.
1
3
1
2
7 8
10 11 12
9
1
2
2
3
1
2
1