Lexmark GENESIS S815 User manual

1Unpack printer
Notes:
•Do not attach the USB cable until
prompted to do so.
•Place the printer near the computer
during setup. If you're setting up on
a wireless network, then you may
move the printer after setup is
complete.
•Contents may vary by model and
region.
2Remove tape and packing material from all areas of the
printer
Lexmark S800 Series Installation

3Use slider to extend paper guides
4Load paper
1Load paper.
2Adjust the paper guide.
Lexmark S800 Series Installation

5Extend paper exit tray
1Pull out the exit tray.
2Extend the flip-out tray.
6Connect power cord only
Note: DO NOT attach the USB cable yet.
CAUTION—POTENTIALINJURY: Read the safety information included with this product before connecting
power or making any cabling connections.
Lexmark S800 Series Installation

7Make sure printer is on
8Set language on the printer control panel
After setting the language, touch OK.
9Confirm language
Touch if the language is correct.
Touch if it is not correct.
Lexmark S800 Series Installation

10 Set country/region
After setting the country/region on the
printer, touch Accept.
11 Set date
Aftersettingthedate onthe printer,touch
Accept.
12 Set time
Aftersettingthe timeon theprinter,touch
Accept.
Lexmark S800 Series Installation

13 Set time zone
After setting the time zone on the printer,
touch Accept.
14 Open printer
Behind the printhead access door, you'll
find the touch-screen cloth and customer
support label, which contains the
following:
1Model number
2MAC address
3Machine serial number
4Ink compatibility information
15 First, install each color ink cartridge. Then, use two hands
to install black cartridge
Lexmark S800 Series Installation

16 Close printer
17 From the printer control panel, touch Continue
Notes:
•The alignment page prints.
•Do not remove the page until
printing stops. The alignment page
may take a while to print and will
move in and out during the process.
•Streaks on the alignment page are
normal and not an indication of a
problem.
•The alignment page that prints may
differ from the one shown.
•Recycle the alignment page.
Lexmark S800 Series Installation