LEXOautomation BOSS HT4 User manual

LEXO
BOSS HT4
COMPATIBLE
REMOTE

Press the "RADIO SET" button for 1-2 seconds, courtesy
light will flash once and stay on for 30 seconds.
On the NEW remote, press and hold the button you wish to
activate your device until the courtesy light flashes twice.
Programming the Remote to a OL4 (Sectional Overhead
Motor)
This system only holds 20 remotes. If you reach the maximum
positions the system will wipe the first coded remote to
program a new remote.
To clear the entire memory - Press and hold the “RADIO SET”
button for 5 seconds (the courtesy light will flash 7 times
indicating all transmitters have been cleared from memory).
Press the “RADIO SET” button for 1-2 seconds (the OK LED
will stay on and the unit will beep once).
On the NEW remote, Press and hold the button you wish to
activate your device until the OK LED switches off and unit
beeps twice.
Programming the Remote to a OL6 (Sectional Overhead
Motor)
This system only holds 20 remotes. If you reach the maximum
positions the system will wipe the first coded remote to
program a new remote.
To clear the entire memory - Press and hold the “RADIO SET”
button for 8 seconds (the OK light will flash 3 times indicating
all transmitters have been cleared from memory).
Press and release the “SET” button (the OK LED will flash
twice and you now have a 30 second window for coding).
On the NEW remote, During this 30 second time period
press the push button on your remote (the OK LED will flash
once and the unit will beep twice indicating the code has
been accepted).
Programming the Remote to a RD9 (RollerDoor Motor)
This system only holds 20 remotes. If you reach the maximum
positions the system will wipe the first coded remote to
program a new remote.
To clear the entire memory - Press and hold the “SET” button
for 7 seconds (the OK LED will flash twice and the unit will beep
twice indicating all transmitters have been cleared from
memory).