LG 19LG3000 User manual

Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record model number and serial number of the
TV.
Refer to the label on the back cover and quote this
information to your dealer when requiring service.
LCD TV
OWNER’S MANUAL
LCD TV MODELS
19LG30**
22LG30**
26LG30**
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
ID Number(s): 5661 : 19LG3000-ZA
5662 : 22LG3000-ZA
5663 : 26LG3000-ZA
5724 : 19LG3010-ZB
5745 : 22LG3010-ZB
1
ENGLISH

Protection Cover
(26LG30**)
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
■Images shown may differ from your TV
Owner’s Manual Batteries
Remote Control
Power Cord
or
Protection Cover
(19/22LG30**)
This feature is not available for all models
Polishing Cloth
Polishing cloth for use on the screen.
Lightly wipe any stains or ngerprints on the surface of
the TV with the polishing cloth.
Do not use excessive force. This may cause
scratching or discolouration.
Only 19/22LG30**
Only 26LG30**
Cable management clip
1-screw for stand xing
(Refer to p.6)
x3
Bolts for stand assembly
(Refer to p.9)
x4
2

Contents
ACCESSORIES....................................................2
SAFETY INSTRUCTIONS/WARNING .................5
PREPARATION
Front Panel Controls.............................................6
Back Panel Information ........................................8
Setting Up Your TV .............................................10
Positioning Your Display.....................................12
Kensington Security System...............................12
Antenna Connection...........................................15
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup.............................................16
Digital Audio Out Setup ......................................17
DVD Setup..........................................................18
VCR Setup..........................................................20
Insertion Of CI Module .......................................23
PC Setup ............................................................23
Connecting with a HDMI to DVI cable............24
Auto Congure (RGB [PC] mode only)...........26
Adjustment for screen Position, Size, Phase .27
Selecting Resolution.......................................28
WATCHING TV / PROGRAMME
CONTROL
Remote Control Key Functions ..........................29
Turning On The TV .............................................31
Programme Selection.........................................31
Volume Adjustment.............................................31
Menus Selection And Adjustment .......................32
Auto Programme Tuning.....................................33
Language Selection (In Digital Mode Only)........34
Manual Programme Tuning (In Digital Mode).....36
Manual Programme Tuning (In Analog Mode)....37
Programme Skip.................................................38
Programme Swap...............................................39
Assigning Programme Fine Tune (In Analog Mode)
40
Input List.............................................................42
EPG (Electronic Programme Guide) (In Digital Mode)
43
Switch on/off EPG ..............................................43
Select a programme ...........................................43
Button Function in Guide Mode..........................44
PICTURE CONTROL
Picture Size (Aspect Ratio) Control....................45
Preset Picture Settings.......................................47
Picture Mode-Preset.......................................47
Colour Temperature (Medium/Warm/Cool).....48
Manual Picture Adjustment.................................49
Picture Mode-User option...............................49
Picture Improvement Technology .......................50
AV Mode .............................................................51
SOUND CONTROL
Sound Setting Adjustment -User Mode ..............52
Preset Sound Settings-Audio Mode ...................53
Balance...............................................................54
Virtual Surround..................................................55
Auto Volume Leveler ..........................................56
Selecting Digital Audio Out.................................57
TV Speakers On/ Off Setup................................58
Type....................................................................59
OPTION CONTROL
Menu Language Selection..................................60
Time Zone Setup ................................................61
Clock Setup ........................................................62
Auto On/Off Timer Setting ..................................63
Sleep Timer Setting ............................................64
Subtitle................................................................65
Teletext Language ..............................................66
Diagnostics.........................................................67
CI (Common Interface) Information....................68
3
ENGLISH
Contents

PARENTAL CONTROL / RATINGS
Set Password & Lock System ............................69
Block Programme...............................................70
Parental Guidence..............................................71
Key Lock.............................................................72
TELETEXT
Switch On/Off .....................................................73
Simple Text .........................................................73
Top Text ..............................................................73
Special Teletext Functions..................................74
DIGITAL TELETEXT
Teletext Within Digital Service ............................75
Teletext In Digital Service ...................................75
APPENDIX
Initializing (Reset to original factory settings) .....76
Troubleshooting..................................................77
Maintenance.......................................................79
Product Specications........................................80
4
Contents

SAFETY INSTRUCTIONS/WARNING
SAFETY INSTRUCTIONS/WARNING
- Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such
as vases, shall be placed on the apparatus.
- The Class I apparatus shall be connected to a mains socket outlet with a protective earthing
connection.
- The mains plug or appliance coupler is used as the disconnect device, the disconnect device
shall remain readily operable.
- Excessive sound pressure from earphones and headphones can cause hearing loss. Adjust-
ment of the equalizer to maximum increases the earphones and headphones output voltage and
therefore the sound pressure level.
- A certied power supply cord has to be used with this equipment. The relevant national installa-
tion and/or equipment regulations shall be considered. A certied power supply cord not lighter
than ordinary polyvinyl chloride exible cord according to IEC 60227 (designation H05VV-F 3G
0.75mm2 or H05VVH2-F2 3G 0.75mm2) shall be used. Alternative a exible cord be of synthetic
rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.
- The LCD TV Monitor is for entertainment use only and visual display tasks are excluded
5
ENGLISH

PREPARATION
Front Panel Controls
■Image shown may differ from your TV.
■ If your TV has a protection lm attached, remove the lm and then wipe the TV with a polishing cloth.
LCD TV Models : (Only 26LG30**)
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
Attaching the TV to a desk (Only 26LG30**)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or
damaging the product. Use only an attached screw.
WARNING
►
To prevent TV from falling over, the TV should be securely attached to the oor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
Stand
Desk
1-Screw
(provided as parts of the product)
6
PREPARATION

LCD TV Models : (Only 19/22LG30**)
INPUT MENU OK - + - +
PROGRAMMEVOLUME
MENUOK
INPUT
POWER
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
7
ENGLISH
PREPARATION

PREPARATION
Back Panel Information
RGB IN (PC)
OPTICAL
DIGITAL
AUDIOOUT
AV 1 AV 2
ANTENNAIN
RS-232C IN
(SERVICE ONLY)
AUDIO IN
(RGB/DVI)
HDMI IN 1
(DVI)
COMPONENT IN
VIDEO
AUDIO
AV IN 3
H/P
S-VIDEO
HDMI IN 2 PCMCIA CARD SLOT
R L
AUDIO
VIDEO
10
11
12
5
4
1
2 3
5 6 7 8 9
1Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specications page. Never attempt
to operate the TV on DC power.
2RGB/DVI Audio Input
Connect the audio from a PC or DVI.
3DIGITAL AUDIO OUT OPTICAL
Connect digital audio from various types of equipment.
Note: In standby mode, this port does not work.
4Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external
device to these jacks.
5HDMI Input
Connect a HDMI signal to HDMI IN. Or DVI (VIDEO)
signal to HDMI/DVI port with DVI to HDMI cable.
6RGB Input
Connect the output from a PC.
7RS-232C IN (SERVICE ONLY) PORT
8Component Input
Connect a component video/audio device to
these jacks.
9Antenna Input
Connect RF antenna to this jack.
󱂰PCMCIA (Personal Computer Memory Card
International Association) Card Slot
(This feature is not available in all countries.)
󱂱Audio/Video Input
Connect audio/video output from an external
device to these jacks.
S-Video Input
Connect S-Video out from an S-Video device.
󱂲Headphone Socket
Connect the headphone plug to this socket.
8
PREPARATION

Stand Installation
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product
can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from
abrasion of the tightening part of the bolt.
(Only 26LG30**)
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Assemble the TV as shown.
Assemble the parts of the Stand Body with
the Cover Base of the TV. Fix the 4 bolts securely using the holes in the back of the TV.
Stand Body
Cover Base
(Only 19/22LG30**)
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Assemble the TV as shown.
9
ENGLISH
PREPARATION

PREPARATION
Setting Up Your TV
Please set it up carefully so the product does not fall over.
■ You should purchase necessary components to x the TV to the wall.
■Position the TV close to the wall to avoid the possibility of falling.
■ The instructions shown below are a safer way to set up the TV, which is to x it to the wall, avoiding the possibility
of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent
the TV from damage. Ensure that children do not climb or hang from the TV.
Use the eye-bolts or TV brackets/bolts to x the TV to the wall as shown in the picture.
(If your TV has bolts in the holes, loosen these bolts.)
* Fix the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
Use a sturdy rope to tie the TV. It is safer to tie the rope horizontally between the wall and the TV.
NOTE
 When moving the TV, untied the rope rst.
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To set up TV safely, make sure that the height of the bracket on the wall and on the TV are the same.
10
PREPARATION