LG 32LB520B User manual

Life's Good
xx _i_i_i,_
}i_ili_iIJ
{i!ii_iii!!_:
XED TV _
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operatin 9 your TV
and retain it for future reference.
32LB52QB 6QLB520Q
65LB52QQ
I 0773=CE360000=L202 I
wwwJg.com

2 IMPORTANT SAFETY INSTR JCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
_1 The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated dangerous voltage within the
product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
_t_ The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING/CAUTION
-TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
_'\ CAUTION
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
@ NOTE
The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
WARNING: This product contains chemicals
known to the State of California to cause
cancer and birth defects or other reproductive
harm. Wash hands after handling.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not btock any ventilation openings. Install
in accordance with the manufacturer's
instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
• Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
ptug has two blades with one wider than
the other. A grounding type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet (Can differ
by country).
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.

•Only use attachments/accessories specified
by the manufacturer.
• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms
or when unused for long periods of time.
• Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
• Do not press strongly upon the panel with a
hand or a sharp object such as a nail, pencil
or pen, or make a scratch on it.
• Do not stick metal objects or any other
conductive material into the power cord. Do
not touch the end of the power cord while it
is plugged in.
• Keep the packing anti-moisture material
or vinyl packing out of the reach of
children. Anti-moisture material is harmful
if swallowed. If swallowed by mistake,
induce vomiting and go to the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of
children.
IMPORTANT SAFETY INSTR JCTIONS 3
CAUTION concerning the Power Cord
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner's manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded watl outlets, loose or damaged
walt outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the ptug when unplugging the
power cord. Do not pull on the power cord to
unplug the TV.
• Warning - To reduce the risk of fire or
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
• Do not expose to dripping or splashing and
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).

4IMPORTANT SAFETY INSTR JCTIONS
• Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightning rods, or gas pipes.
• As long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
• Do not attempt to modify this product in
any way without written authorization from
LG Electronics. Unauthorized modification
could void the user's authority to operate this
product.
• Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC)in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSl/NFPA 70
(NEe Section 810-20)
Grounding Conductor
(NEe Section 810-21)
Groun C Power Service Grounding
Electrode System
NEC= National Electrical Code (NEe Art 250, Part H)
• Cleaning
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals such
as alcohol, thinners, or benzine.
• Moving
Make sure the product is turned off,
unplugged, and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
• Ventilation
Install your TV where there is proper
ventilation. Do not install in a confined space
such as a bookcase. Do not cover the product
with cloth or other materials while plugged.
Do not install in excessively dusty places.
• If you smell smoke or other odors coming
from the TV, unplug the power cord and
contact an authorized service center.
• Keep the product away from direct sunlight.
• Never touch this apparatus or antenna during
a lightning storm.
• When mounting a TV on the walt, make sure
not to install the TV by hanging the power
and signal cables on the back of the TV.
• Do not allow an impact shock, any objects to
falt into the product, and do not drop anything
onto the screen.
• DISCONNECTING DEVICE FROM THE MAIN
POWER
Mains ptug is the disconnecting device. The
ptug must remain readily operable.
• Store the accessories (battery, etc.) in a safe
location out of the reach of children.
• This apparatus uses batteries. In your
community there might be regulations that
require you to dispose of these batteries
properly due to environmental considerations.
Please contact your local authorities for
disposal or recycling information.
• The batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like.
• [] This equipment is a Class Itor double
insulated electrical appliance. It has been
designed in such a way that it does not
require a safety connection to electrical earth.

•Dot Defect
The panel is a high technology product with
resolution of two miliion to six million pixets.
In a very few cases, you could see fine dots
on the screen while you're viewing the TV.
Those dots are deactivated pixets and do not
affect the performance and reliability of the
TV.
• Generated Sound
Cracking noise A cracking noise that occurs
when watching or turning off the TV is
generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing
A low level noise is generated from a
high-speed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending upon the product.
This generated sound does not affect the
performance and reliability of the product.
• Take care not to touch the ventilation
openings. When watching the TV for a long
period, the ventilation openings may become
hot. This does not affect the performance of
the product or cause defects in the product.
• Do not install this product on a wall if it
could be exposed to oil or oil mist. This may
damage the product and cause it to fall.
• If the TV feels cotd to the touch, there may
be a small flicker when it is turned on. This
is normal; there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV's performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
IMPORTANT SAFETY INSTRUCTIONS 5
• If a fixed image displays on the TV screen for
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
• If the aspect ratio of the TV is set to 4:3 for a
long period of time, image burn may occur on
the letterboxed area of the screen.
• Avoid displaying a fixed image on the TV
screen for a long period of time (2 or more
hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.

6 IMPORTANT SAFETY INSTRUCTIONS
I
fFor USA and Canada
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2)this device must accept any
interference received, including interference that may cause undesired operation of the device. Any
changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
This reminder is provided to call the CATV system installer's attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.
fFor USA
LG Electronics offers a customized e-waste take-back and recycling service that meets local
needs and requirements in the countries where e-waste regulations are in place, and also provides
product and packaging take-back and recycling service voluntarily in some countries. LG Electronics
evaluates products' recyclabitity at the design step using LG's recyclability evaluation tool, with the
goal of improving recyclability where practicable. Through these activities, LG seeks to contribute
to conserving natural resources and protecting the environment.
For more information about the LG Recycling Policy, please visit our global site at
http://www.lg.com/gtobat/sustainabitity/environment/take-back-recycling

I C TNSES 7
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www./g.com.
DOLB_ Manufactured under license from Dolby Laboratories.
DIGITAL Dolby and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
H_IrlI_ _ logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
.............................. States and other countries.
/
.!@ NOTE ...............................................................................................................................................................................................................................................................................................................................................................................................................................................
image shown may differ from your TV.
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
The available menus and options may differ from the input source or product modet that you are
using.
New features may be added to this TV in the future.

8 ASSEMBL NG AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items, if there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
Remote Control, Batteries Owner's Manual
(AAA)
Stand Base
(For 60LB5200 and reference
for 65LB5200.)
Component Adapter Cable
(For 60LB5200 /65LB5200)
[]
Stand Base
(For 32LB520B)
Stand Screws
M4 x 10 (4pcs)
(For 60LB5200)
Stand Holder
(For 32LB520B)
BT, 4 x18
(4pcs)
Stand Screws
(For 32LB520B)
BA, 3.5 x 16
(2pcs)
Power Cord
(For 60LB5200)
Stand Screws
M6 x 14 (4pcs)
(For 65LB5200)
Stand Holder Cover
(For 32LB520B)
Wall Mount Spacer (2pcs)
(For 65LB5200)

ASSFMBLNGANDPI_['PA[:NG 9
__"\ CAUTION
Do not use any unapproved items to ensure the safety and product's lifespan.
• Any damages or injuries by using unapproved items are not covered by the warranty.
• Some m.odets appear to have a thin film on the screen, It is actually part of the screen; do not
remove it.
.....@ NOTE
•The itemssuppliedwithyour productmay varydepending upon the _
model.
• Productspecificationsorcontentsof thismanual may be changed
withoutpriornoticedue to upgrade ofproductfunctions.
• Foran optimalconnection,HDMI cablesand USB devicesshould
havebezelslessthan 10 mm (0.39inches)thickand 18 mm ..........
(0,7 inches) width, _A _-<10 mm (0.39 inches)
• Use an extension cable that supports USB 2.0 if the USB cable or _B_-<18 mm (0_7 inches)
USB flash drive does not fit into your TV's USB port. /

10 ASSEMBL NG AND PREPARING
Parts and Buffons
65LB5200
icator
ontrol
Sensor
Up/Down
Up/Down
g Button
_ut/OK Button
/Off
60LB5200
Power Indicator
Remote Control
Sensor
Up/Down
Up/Down
g Button
_ut/OK Button
/off
32LB520B
Power Indicator_
Remote Control _
Sensor
Up/Down
Up/Down
g Button
)ut/OK Button
/Off

ASSEMB NGAND PREPAF NG 11
Using the keyboard buttons
You can operate the TV by pressing the keyboard buttons.
Please refer to page10 for basic functions of the keyboards.
Move !eft/right Press +/_ to move Left/right on a menu or a submenu.
Press A/V to move up/down on a menu or a submenu.
1. When there is no OSD on the screen, press SETTING can access the
menu settings.
2. When there is an OSD on the screen, press SETTING can exit the
menu settings.

12 ASSEMBL NG AND PREPARING
Lifting and Moving theTV
When moving or lifting the TV, read the
following to prevent the TV from being
scratched or damaged and for safe
transportation regardless of its type and size.
_ CAUTION
•Avoidtouchingthe screenatalltimes,as
thismay resultindamage tothe screen.
• Do not placethe producton thefloorwithits
frontfacingdown withoutpadding.FailuretoI
I do so may resultindamage tothe screen.
• It is recommended to move the TV in the
box or packing material that the TV originally
came in.
• Before moving or lifting the TV, disconnect
the power cord and all cables.
• When holding the TV, the __
screen should face away from
you to avoid damage.
• Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grille area.
X
• Use at least two people to
move a large TV.
• When transporting the TV by
hand, hold the TV as shown in
the following illustration.
• When transporting the TV, do not expose the
TV to jolts or excessive vibration.
• When transporting the TV, keep the TV
upright; never turn the TV on its side or tilt
towards the left or right.
Setting Up The TV
Attaching the stand
-_"\ CAUTION
• When attaching the stand to the TV ]
set, place the screen facing down on a /
cushioned table or flat surface to protect the /
screen from scratches. /
60LBB200
_A, Stand Base
_ M4 x 10 (4pcs)
6BLBB200
_tand Base
_M6 x 14 (4pcs)

ASSEMB NGAND PREPAF NG 13
3Z,BSZOB
,,-_ii"z, CAUTION
• Do not mistake the BT 4 x 18 screws
and the BA 3.5 x 16 screws,
_BT 4 x 18 (4pcs) - For step 1
BA 3.5 x 16 (2pcs) - For step 2
Step2 Use2pcsBA3.5x 16 screws to
install the stand to the TV set.
Step 1 Use 4 pcs BT 4 x 18 screws to
install the stand.
A. Stand
B. Stand Holder
Cover
Stand Base
A, Stand Base

14 ASSEMB NG AND PREPAF NG
Mounting on a table
1 Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (4 inches) (minimum) space
from the walt for proper ventilation.
2 Connect the power cord to a wall outlet.
CAUTION
• Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Mounting on a wall
An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the
wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall
perpendicular to the floor. If you are attaching
the TV to other building materials, please
contact qualified personnel to install the wall
mount. Detailed instructions will be included
with the wall mount. We recommend that you
use an LG brand watl mount, please use a wall
mount bracket where the device is adequately
secured to the wall with enough space to allow
connectivity to external devices.
Ocm ches)
iii
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.
S::::T:7 :T
VESA(Ax B)
I00 x 100ram 400x 200ram
Standard M4 M6
screw 4 4
screws
Wall mount
bracket
(optional)
esLB520o
400 x 400ram
M6
4
Buy a suitable wall mount kit in the
market by refering to this table for
each model.

ASS_MB.NGAND PRERARNG ]5
......_],:_ CAUTION .............
o Disconnect the power before moving or
installing the TV. Otherwise electric shock
may occur.
o If you install the TV on a ceiling or slanted
wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel. When using a third-party wall
mount, it is not covered by the warranty.
o Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
o Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
o Do not install this product on a wall if it
could be exposed to oil or oil mist. This may
damage the product and cause it to fall.
-.O NOTE .
[_ Use the screws that are listed in the VESA
i standard screw specifications.
I_The wall mount kit includes an installation
i manual and necessary parts.
I_The wall mount bracket is optional. You can
i obtain additional accessories from your local
I deater.
i_The length of screws may differ depending
upon the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
supplied with the wall mount.
For 65LB5200)
When attaching a wall mounting bracket to
the TV, insert the wall mount inner spacers
into the TV wall mount holes to adjust the
vertical angle of the TV.
Wall Mount Inner Spacers

16 MAKNG CONNFCTIO '_S
MAKING CONNECTIONS
You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
For more information on external device's connection, refer to the manual provided with each device.
,,;@ NOTE
Ifyou record a TV program on a DVD recorder or VCR, make sure to connect the TV signalinput
cable to the TV through a DVD recorder or VCR. For more information about recording,refer to the
manual provided with the connected device.
• The external device connections shown may differslightlyfrom illustrationsinthismanual.
• Connect external devices to the TV regardless about the order of the TV port.
• Ifyou connect a gaming device to the TV, use the cable supplied with the gaming device.
I• Refer to the externa equ pment s manua for operat ng nstruct ons.
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV, The illustrations may differ from the actual items
and an RF cable is optional,
, _], CAUTION
• Make sure not to bend the copper wire of
the RF cable.
• Complete all connections between devices,
and then connect the power cord to the
power outlet to prevent damage to your TV,
@ NOTE
/• Use a signal splitter to use 2 TVs or more. /
• DTV Audio Supported Codec: MPEG, Dolby
Digital j/

MAKNGCONNFCTIONS 17
Other connections (For Model 60LB5200/65LB5200)
Connect your TV to external devices. For the best picture and audio quality, connect the external device
and the TV with the HDMI cable as shown. Depending upon the model, a cable may be provided. When
connect DVD etc. devices to the COMPONENT port, please remember to use the component adapter
cable.
/
VIDEO
Digital Audio
System
Blu-Ray /HD Cable Box /
HD STB/DVD/PC/
DVl to HDMI Blu-Ray /HD Cable Box /
HD STB /DVD

18 MAKNG CO _NFCT ONS
Other connections (For Model 32LB520B)
Connect your TV to external devices. For the best picture and audio quality, connect the external device
and the TV with the HDMi cable as shown. Depending upon the model, a cable may be provided.
RED
Blu-Ray /HD Cable Box /
HD STB /DVD /PC /Digital Audio
DVl to HDMI System
LAUDIOJ
Y PB PR
II
VIDEO
Blu-Ray /HD Cable Box /
HD STB /DVD

REMOTE CO ',,FI_ROL ']9
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To install batteries, open
the battery cover, replace batteries (1.5 V AAA) matching the {+} and {-} ends to the label
inside the compartment, and close the battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient
pollution. To remove the batteries, perform the installation actions in reverse.
This remote uses infrared light.
sensor. When in use, it should be pointed in the direction of the TV's remote
(POWER) Turns the TV on or off.
"IV Returns to the last TV channel.
CAPTION Activates or deactivates the subtitles.
AV MODE Selects an AV mode.
RATIO Resizes an image.
-BE}INPUT Changes the input source. Turns the TV on if it is off.
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.
LIST Accesses the saved channel list.
FLASHBK Alternates between the two last channels selected (pressing
repeatedly).
Jr' VOLm Adjusts the volume level.
FAV Accesses your favorite channel list.
AUDIO Digital signal: Changes the audio language.
Analog signal: Changes the MTS sound.
MUTE J_"Mutes all sounds.
A CH V Scrolls through the saved channels.
A PAGE V Moves to the previous or next screen.
PICTURE Changes the image mode.
INFO (D Shows information on the current program.
SOUND Changes the sound mode.
SETTINGS Accesses the main menu.
Q.MENU Accesses the quick menu.
Navigation buttons (up/down/bit/right) Scrolls through menus or options.
OK(_) Selects menus or options and confirms your input.
BACK Returns to the previous screen.
EXiT Clears all on-screen displays and returns to TV viewing.
Not functional.
SLEEP Sets the length of time until the TV to turns off.
Control buttons ( m, 1_,I1|,_, _) Controls the compatible devices (USB).
_ _{SS_These access special functions in some menus.

20 SETTINGS
SETTINGS
SETTINGS => CHANNEL -_ Auto Tuning
Memorizes automatically the channels being
broadcast.
• The channels will not be memorized properly
if the antenna/cable is not installed correctly.
• Auto Tuning memorizes the channels that are
currently being broadcast.
SETTINGS => PICTURE -_ Energy Saving
Saves electric power by adjusting screen
brightness.
• OffTurns off the Energy Saving.
• Minimum /Medium /Maximum Applies the
pre-set Energy Saving.
• Screen Off Screen is turned off and only
sound is played. Press any button on the
remote control to turn the screen back on.
SETTINGS => PICTURE _ Picture Mode
Select the picture mode optimized for the
viewing environment or the program.
• Vivid Heightens contrast, brightness and
sharpness to display vivid images.
• Standard Displays images in standard levels
of contrast, brightness and sharpness.
• Sport Weakens contrast, brightness and
sharpness to disptay sport images.
• Cinema /Game Displays the optimum picture
for movie, game.
• Backlight Selects the range of colors that
can be expressed.
• Contrast Adjusts the difference between the
light and dark areas of the picture. To get better
picture value, Contrast should be adjusted to
the proper value.
• Brightness Adjusts the brightness of the
picture, and usually is adjusted together
with Contrast.
• Sharpness Adjusts the sharpness level of
video performance.
• Color Adjusts the richness of colour.
• Tint Adjust the tint of the picture.
• Color Temperature Adjusts the overall tone
of the screen as desired.
• Depending upon input signal or other picture
settings, the range of detailed items for
adjustment may differ.
SETTINGS => PICTURE _ Picture Mode
Picture Option
Adjusts detailed setting for images.
• Noise Reduction Eliminates noise in the
picture.
• MPEG Noise Reduction Eliminates noise
generated while creating digital picture
signals.
• Black Level Adjusts the brightness and
contrast of the screen to suit the btack level.
• Real Cinema Optimizes the screen for movie
viewing.
• Trumotion For 60LB5200/65LB5200,
select On or Off to controt the MEMC feature.
• Depending upon input signal or other picture
settings, the range of detailed items for
adjustment may differ.
SETTINGS => PICTURE _ Picture Mode
Advanced Control
For each picture mode, screen can be
calibrated; or for a special screen, picture
settings can be adjusted. Select the desired
picture mode.
• Dynamic Contrast Adjusts the contrast to
the optimal levet according to the image's
brightness.
• Dynamic Color Adjusts colors to make the
image appear in more natural colors.
• Skin Color Skin color spectrum can be
separately set to implement the skin color as
defined by the user.
• Grass Color Natural color spectrum
(meadows, hills, etc.) can be separately set.
• Sky Color Sky color is set separately.
• Gamma Sets the gradation curve according to
the output of picture signal in relation to the
input signal.