4
ENGLISH
SAFETY INSTRUCTIONS
ySignal from Remote Control can be
interrupted due to external/internal
lighting eg Sunlight, fluorescent
lighting. If this occurs turn off lighting
or darken viewing area.
yWhen connecting external devices
such as video game consoles, make
sure the connecting cables are long
enough. Otherwise, the product may
fall over, which may cause injury or
damage the product.
yDo not turn the product On/Off by
plugging-in or unplugging the power
plug to the wall outlet. (Do not use
the power plug for switch.) It may
cause mechanical failure or could
give an electric shock.
yPlease follow the installation
instructions below to prevent the
product from overheating.
- The distance between the product
and the wall should be more than 10
cm.
- Do not install the product in a
place with no ventilation (e.g., on a
bookshelf or in a cupboard).
- Do not install the product on a
carpet or cushion.
- Make sure the air vent is not
blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
yTake care not to touch the ventilation
openings when watching the TV
for long periods as the ventilation
openings may become hot. This
does not affect the operation or
performance of the product.
yPeriodically examine the cord of your appliance,
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized servicer.
yPrevent dust collecting on the power
plug pins or outlet. This may cause a
fire hazard.
yProtect the power cord from physical
or mechanical abuse, such as being
twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular
attention to plugs, wall outlets, and
the point where the cord exits the
appliance.
yDo not press strongly upon the panel
with a hand or sharp object such as
nail, pencil or pen, or make a scratch
on it, as it may cause damage to
screen.
yAvoid touching the screen or
holding your finger(s) against it
for long periods of time. Doing so
may produce some temporary or
permanent distortion/damage to
screen.
yWhen cleaning the product and its
components, unplug the power
first and wipe it with a soft cloth.
Applying excessive force may cause
scratches or discolouration. Do not
spray with water or wipe with a wet
cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax,
benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire,
electric shock or product damage
(deformation, corrosion or breakage).
yAs long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
yWhen unplugging the cable, grab the
plug and unplug it, by pulling at the
plug. Don’t pull at the cord to unplug
the power cord from the power
board, as this could be hazardous.
yWhen moving the product, make
sure you turn the power off first.
Then, unplug the power cables,
antenna cables and all connecting
cables. The TV set or power cord
may be damaged, which may create
a fire hazard or cause electric shock.
yWhen moving or unpacking the
product, work in pairs because the
product is heavy. Otherwise, this
may result in injury.
yContact the service centre once a
year to clean the internal parts of
the product. Accumulated dust can
cause mechanical failure.
