When you feel any abnormality in Picture and Sound settings, you can use this
function to reset all the settings to initial condition.
Quick Reference Guide
1. Factory Reset
1.1 When to do Factory Reset?
Follow below on-screen instructions for Factory Reset.
1.2 How to do Factory Reset ?
1. Press SETTINGS and the Navigation buttons to scroll to OPTION.
2. Press the Navigation buttons to scroll to the Factory Reset
(depending on model) and then press OK.
3. Select the Menu language.
4. Select Home Use mode and press OK.
5. Set the Date as per requirement.
6. Auto Tuning message window will appear press next and follow instructions.
Step 1 Step 2 Step 3 Step 4
Note: Changing Mode Setting (Home Use 1 Store Demo) will reset all Channel
information and need to store all Channel Data.
2. Signal Strength Indicator
Use this function to know the quality of RF cable signal.
Signal strength is displayed in channel information window.
A high signal level indicates a good signal quality.
If picture quality is not good or distorted, use this function to check the signal strength.
Note: If signal strength is low then contact your cable operator.
Note: Actual images may vary depending on Model.
Good Signal Weak Signal
Step 5 Step 6
