LG 24MP88GM User manual

www.lg.com
Please read the safety information carefully before using the
product.
IPS LED Monitor (LED Monitor) Model List
Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
24MP88HM
24MP88HV
24MP88GM
24MP88TM

2
ENG
ENGLISH
Contents
CONTENTS
25 - -Reset
26 - -Picture mode
27 TROUBLESHOOTING
29 SPECIFICATIONS
33 Preset Modes (Resolution)
33 Indicator
34 PROPER POSTURE
34 Proper posture for using the Monitor set.
3LICENSE
4ASSEMBLING AND
PREPARING
4Product Components
5Component and Button Description
5- How to Use the Joystick Button
6Parts and buttons
6Input Connector
7Moving and Lifting the Monitor
8Installing the Monitor
8- Assembling the stand base
9- Detaching the Stand Base
10 - Using the cable holder
10 - Installing onto a table
11 - Adjusting the angle
12 - Using the Kensington lock
13 - Mounting on a wall
14 USING THE MONITOR
14 Connecting to a PC
14 - D-SUB connection
14 - HDMI connection
15 Connecting to AV Devices
15 - HDMI connection
15 Connecting to External Devices
15 - Connecting Headphones
16 USER SETTINGS
17 Customizing settings
17 - Menu Settings
17 - -Quick Settings
19 - -Picture
22 - -Sound
23 - -General
24 - -Auto Configuration

3
ENG
ENGLISH
LICENSE
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing Ad-
ministrator, Inc.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet
the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
MaxxAudio and additional MAXX trademarks are trademarks and/or
registered trademarks of Waves Audio Ltd.

4
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Product Components
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
yAlways use genuine components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of counterfeit components.
yNote that the components may look different from those shown here.
yWithout prior notice, all information and specifications in this manual are subject to change to im-
prove the performance of the product.
yTo purchase optional accessories, visit an electronics store or online shopping site or contact the
retail store where you purchased the product.
yThe DisplayPort cable may not be available in some areas.
CAUTION
NOTE
CD / Card
Stand Base Stand Body
HDMI Cable
( This cable is not in-
cluded in all countries. )
( Depending on the country ) ( Depending on
the country )
Power Cord AC-DC Adapter AC-DC Adapter
or
Cable Holder Screw Cover 2 Screws
27MP67VQ24MP67VQ22MP67VQ 23MP67VQ
22MP67HQ 23MP67HQ 24MP67HQ 27MP67HQ
D-SUB Cable
( This cable is not included in all
countries. )

5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Component and Button Description
Power LED
yOn: power is on
yOff: power is off
Joystick Button
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
Power on Press the joystick button once with your finger to turn on the
monitor.
Power off Press and hold the joystick button once with your finger to turn off
the monitor.
◄/►Volume
Control You can control the volume by moving the joystick button left/right.
yThe joystick button is located at the bottom of the monitor.
NOTE

6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Input Connector
AUDIO IN HDMI IN 1 HDMI IN 2
Parts and buttons
Connection panel (See p. 14~15)

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
yAs far as possible, avoid touching the moni-
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
yIt is advisable to place the monitor in the
original box or packing material before at-
tempting to move it.
yBefore moving or lifting the monitor, discon-
nect the power cord and all cables.
yHold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
yWhen holding the monitor, the screen should
face away from you to prevent it being
scratched.
yWhen moving the monitor, avoid any strong
shock or vibrations to the product.
yWhen moving the monitor, keep it upright,
never turn the monitor on its side or tilt it
sideways.
CAUTION
yIf you use the monitor panel without the
stand base, its joystick button may cause
the monitor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Installing the Monitor
Assembling the stand base
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
1Place the screen face down.
3
2Check the direction of the stand body
(front, back) and then mount the stand body
onto the stand hinge.
Use a tool to attach the stand body as shown
in the figure.
Stand Body
Stand Body
Stand Base
Screw Cover
Attach the Stand Base to Stand Body.
Tighten the screw to the right.
1
2
4Attach the screw cover.
Applying excessive force when tightening
the screws may cause damage to the moni-
tor. Damage caused in this way will not be
covered by the product warranty.
CAUTION
It may hurt your foot off the stand, so be
careful.
CAUTION

9
ENG
ENGLISH
ASSEMBLING AND PREPARING
Detaching the Stand Base
Screw Cover
Stand Body
Stand Base
1 Place the screen face down.
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
2
3
Turn the screw to the left.
Pull out the Stand Base.
As shown in the illustration, pull Screw Cover
out to separate it from the set.
4Remove the two screws on the back of stand
body.
As shown in the illustration, disconnect the
stand body from the stand hinge.
1
2
yIllustrations in this document represent typi-
cal procedures, so they may look different
from the actual product.
yApplying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
yBe careful not to hurt your hand on the edges
of the screw covers.
yDo not carry the monitor upside down by just
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
yWhen lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
CAUTION
It may hurt your foot off the stand, so be
careful.
CAUTION
Stand Body

10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Using the cable holder
Cable Holder
Arrange the cables using the cable holder as
shown in the illustration.
Installing onto a table
1Lift the monitor and place it on the table in an
upright position.
Place at least 100 mm (3.94 inches) away
from the wall to ensure sufficient ventilation.
2Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
100 mm
(3.94 inches) 100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
or
yUnplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
CAUTION
3Press the joystick button on the bottom of the
monitor to turn on the monitor.