LG 43UN700T User manual

www.lg.com
Please read the safety information carefully before using the product.
IPS LED Monitor (LED Monitor) Model List
Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
43UN700
43BN70U
43UN700T

2
ENG
ENGLISH
Contents
CONTENTS
17 USER SETTINGS
17 Activating the Main Menu
17 - Main Menu Features
18 User Settings
18 - Menu Settings
24 TROUBLESHOOTING
26 SPECIFICATIONS
28 Factory Support Mode (Preset Mode, PC)
28 HDMI
28 DisplayPort / USB-C
29 HDMI Timing (Video)
29 Power LED
30 EXTERNAL CONTROL DEVICE
SETUP
30 - Communication Parameters
30 - Transmission
30 - OK Acknowledgement
30 - Error Acknowledgement
31 - Command Reference List
3LICENSE
4ASSEMBLING AND PREPARING
4 Supported Drivers and Software
5 Component and Button Description
5 - How to Use the Joystick Button
6 Moving and Lifting the Monitor
7 - Using the cable holder
7 - Installing onto a table
8 - Adjusting the angle
9 - Using the Kensington lock
10 - Installing the wall mount plate
10 - Installing to a wall
12 REMOTE CONTROL
13 USING THE MONITOR
13 Connecting to a PC
13 - HDMI connection
13 - DisplayPort connection
14 - USB-C connection
14 Connecting to AV Devices
14 - HDMI connection
15 Connecting Peripherals
15 - USB Cable connection - PC
16 Connecting to External Devices
16 - Connecting Headphones

3
ENG
ENGLISH
LICENSE
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP
Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to
display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for
dual-mode source devices are all registered trademarks of the Video Electronics Stan-
dards Association.
The SuperSpeed USB Trident logo is a registered trademark of USB Implementers
Forum, Inc.

4
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
yAlways use genuine LG components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of unauthorized components.
yIt is recommended that use the supplied components.
yIf you use generic cables not certified by LG, the screen may not display or there may be image noises.
yIllustrations in this document represent typical procedures, so they may look different from the actual product.
yDo not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.)
yApplying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way
will not be covered by the product warranty.
yDo not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
and could result in personal injury.
yWhen lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
yFor wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material in
raw material.With no peeled-off appearance, it has good durability. Please use it with confidence because there
is no problem in using the product at all.
yThe components may look different from those illustrated here.
yWithout prior notice, all product information and specifications contained in this manual are subject to change
to improve the performance of the product.
yTo purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
yThe power cord provided may differ depending upon the region.
CAUTION
NOTE
Supported Drivers and Software
You can download and install the latest version from the LGE website ( www.lg.com ).
Drivers and Software Installation Priority
Monitor Driver Recommended
On Screen Control Recommended
Dual Controller Optional

5
ENG
ENGLISH
ASSEMBLING AND PREPARING
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your
finger.
Basic Functions
Power on Press the joystick button once with your finger to turn on the
monitor.
Power off Press and hold the joystick button once with your finger to turn off the
monitor.
◄/►Volume
Control You can control the volume by moving the joystick button left/right.
Component and Button Description
Power LED
yOn: power is on
yOff: power is off
Joystick Button
yThe joystick button is located at the bottom of the monitor.
NOTE
yIR Receiver

6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these in-
structions to prevent the monitor from being scratched
or damaged and to ensure safe transportation regard-
less of its shape or size.
yAs far as possible, avoid touching the monitor
screen. This may result in damage to the screen or
some of the pixels used to create images.
yIt is advisable to place the monitor in the original
box or packing material before attempting to
move it.
yBefore moving or lifting the monitor, disconnect
the power cord and all cables.
yHold the top and bottom of the monitor frame
firmly. Do not hold the screen itself.
yWhen holding the monitor, the screen should face
away from you to prevent it being scratched.
yWhen moving the monitor, avoid any strong shock
or vibrations to the product.
yWhen moving the monitor, keep it upright, never
turn the monitor on its side or tilt it sideways.
CAUTION
yIf you use the monitor panel without the stand
base, its joystick button may cause the monitor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
Or

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Or
Cable Holder
Or
Using the cable holder
Arrange the cables using the cable holder as shown in
the illustration.
Installing onto a table
Lift the monitor and place it on the table in an upright
position.
Place at least 100 mm away from the wall to ensure
sufficient ventilation.
100 mm
100 mm
100 mm
100 mm
100 mm
100 mm
100 mm
100 mm
yUnplug the power cord before moving or installing
the monitor. There is risk of electric shock.
yMake sure to use the power cord that is pro-
vided in the product package and connect it to a
grounded power outlet.
yIf you need another power cord, please contact
your local dealer or the nearest retail store.
CAUTION

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Adjusting the angle
1Place the monitor in an upright position, mounted
on the stand base.
2Adjust the angle of the screen. The angle of the
screen can be adjusted forwards or backwards for a
comfortable viewing experience.
Front SideRear Side
43UN700
43BN70U
Cautions When Connecting Power Cord
yMake sure to use the power cord that is pro-
vided in the product package and connect it to a
grounded power outlet.
yIf you need another power cord, please contact
your local dealer or the nearest retail store.
100-240 V~

9
ENG
ENGLISH
ASSEMBLING AND PREPARING
yTo avoid injury to the fingers when adjusting the
screen, do not hold the lower part of the moni-
tor's frame as illustrated below.
WARNING
yBe careful not to touch or press the screen area
when adjusting the angle of the monitor.
yUse of the Kensington lock is optional.
The accessories can be purchased at your local
electronics store.
NOTE
Using the Kensington lock
The Kensington security system connector is located at
the back of the Monitor set.
For more information on installation and usage, refer to
the Kensington lock user manual or visit the website at
http://www.kensington.com.
Connect the Kensington security system cable between
the Monitor set and a table.
43UN700 43BN70U
Or
Or

10
ENG
ENGLISH
ASSEMBLING AND PREPARING
To install the monitor to a wall, attach a wall mounting
bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed
to the monitor and to the wall.
1If you use screw longer than standard, the monitor
might be damaged internally.
2If you use improper screw, the product might be dam-
aged and drop from mounted position.
In this case, LG Electronics is not responsible for it.
Installing to a wall
Install the monitor at least 100 mm away from the wall
and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed instal-
lation instructions can be obtained from your local retail
store. Please refer to the manual to install and set up a
tilting wall mounting bracket.
100 mm
100 mm
100 mm
100 mm
Wall Mount (A x B) 200 x 200
Standard screw M6
Number of screws 4
Wall Mount Plate
(Optional)
LSW240B
Installing the wall mount plate
This monitor supports the specification of the standard
wall mount plate or compatible device.
1Place the screen face down. To protect the screen
from scratches, cover the surface with a soft cloth.
2Place the wall mount plate onto the monitor and
align it with the screw holes.
3Tighten the four screws to fix the plate to the moni-
tor using a screwdriver.
yThe wall mount plate is sold separately.
yFor more information on installation, refer to the
wall mount plate's installation guide.
yBe careful not to use excessive force when
mounting the wall mount plate, as this can dam-
age the monitor's screen.
NOTE