LG 47TS50MF User manual

www.lg.com
OWNER’S MANUAL
MONITOR SIGNAGE
47TS50MF
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
ENG
ENGLISH

2
ENG
ENGLISH
CONTENTS
CONTENTS
3 INSTALLATIONPREPARATION
3 Accessories
4 MountingHoles
5 PortraitLayout
6 StorageMethodforPanelProtection
6 - CorrectMethod
6 - IncorrectMethod
7 PRODUCTINSTALLATION
7 InstallinganLVDSCable
8 LightingInstallation
9 InstallationinEnclosure
10 Precaution
10 - CorrectMethod
10 - IncorrectMethod
11 TROUBLESHOOTING
12 SPECIFICATIONS
14 LVDSPINMAPGUIDE
 Thewarrantywillnotcoveranydamagescausedbyusingtheproductinanexcessivelydusty
environment.
NOTE

3
ENG
ENGLISH
INSTALLATIONPREPARATION
INSTALLATIONPREPARATION
Accessories
Checkyourproductboxforthefollowingitems.Ifthereareanymissingaccessories,contactthelocal
dealerwhereyoupurchasedyourproduct.Theillustrationsinthismanualmaydifferfromtheactualproduct
andaccessories.
 Donotuseanyunapprovedorcounterfeitpartsoraccessoriestoensurethesafetyandproductlife
span.
 Anydamagesorinjuriesbyusingunapproveditemsarenotcoveredbythewarranty.
 Theaccessoriessuppliedwithyourproductmayvarydependingonthemodel.
 Productspecificationsorcontentsinthismanualmaybechangedwithoutpriornoticeduetoupgrade
ofproductfunctions.
 LVDScableisoptionalandnotprovidedwiththeproduct. PleaserefertoLVDSPinMapGuideon
pages14to15fortheLVDScableassembly.
CD(Owner'sManual)/
EasySetupGuide
CAUTION
NOTE

4
ENG
ENGLISH
INSTALLATIONPREPARATION
Frontoftheproduct
Rearoftheproduct
 Thisproducthasthefrontandbacksides.Makesuretheproductisinstalledwiththefrontsidefacing
forward.
 Imageisdisplayedreverselyonthebackside.
CAUTION
MountingHoles
UseM3screwstomountthemonitor.Thereare20positionsforscrewsontherearsideoftheproduct.

5
ENG
ENGLISH
INSTALLATIONPREPARATION
PortraitLayout
Toinstallinportraitmode,rotatethesetclockwise90degreeswhenlookingatfromthefront.
Theportraitmodeisonlyavailableonthescalerboard.(Thescalerboardshouldsupportportraitmode.)
 Thescalerboardisoptionalanditisnotpartoftheproduct.
CAUTION

6
ENG
ENGLISH
INSTALLATIONPREPARATION
CorrectMethod IncorrectMethod
StorageMethodforPanelProtection
Panel
Cushion
Whenlayingtheproductonaflatfloor,pititface
downonacushionorblankettopreventscratch-
inganddamage.
Ifthereisnoacushionorasoftclothavailable,
ensurethefloorisclean.Thenlaytheproduct
downcarefullywiththepanelfacingeitherupward
ordownward.Atthistime,makesurethatno
objectfallsonthepanel.
Panel
Panel
Panel
Iftheproductistiltedontothebezel,thebottomof
thepanelmaybedamaged.
Iftheproductistiltedontotheedgeofthepanel,
thepanelmaybedamaged.


7
ENG
ENGLISH
PRODUCTINSTALLATION
PRODUCTINSTALLATION
InstallinganLVDSCable
542.25mm
45mm
30mm
LVDSCable
TheLVDScableportislocatedasshowninthefigurebelow.
Wheninstallingtheproduct,makesurethereisenoughspacetoinstalltheLVDScable.

8
ENG
ENGLISH
PRODUCTINSTALLATION
LightingInstallation
Thisproductmustbeinstalledwithbacklighting.
Lightingmustbeinstalledbehindtheproductsothatthedisplaycanbeseenclearly.
Ifsomethingobstructsthebacklighting,additionallightingmayberequired.
Lighting
Lighting
Additionallighting
Additionallighting
Object
600luxormore
(WhentheFullScreen
isWhite.)
600luxormore
(WhentheFullScreen
isWhite.)

9
ENG
ENGLISH
PRODUCTINSTALLATION
 Thisproductcanbeinstalledinvarious
locationsbesidestheenclosure.
Exampleoftheproductintheenclosure
Exampleofthelightinginstallation
Lightingmustbeinstalledintheenclosure.
InstallationinEnclosure
Installtheproductintheenclosure.Wearworking
gloveswheninstallingtheproduct.Donotuse
barehands.Otherwise,itmaycausepersonal
injury.
1 Placetheproductintheenclosure.
2 Attachtheproductusingthepreparedscrew
holesandanadditionalenclosureguideframe.
NOTE
 Thepanelofthisproductissothinthatitcan
beeasilybrokenwhenitisexposedtothe
outside.Useaclearprotectivecovertokeep
theproductfromexposuretotheelements.
CAUTION

10
ENG
ENGLISH
PRODUCTINSTALLATION
Precaution
Donotliftuptheproductbyholdingacorner.Donotholdthescreenareawhenholdingthe
product.
Useasoftclothmoistenedwithn-hexaneto
removedustorstainsonthescreen.
CorrectMethod IncorrectMethod
 Makesurethepowerisdisconnectedbefore
movingorinstallingtheproduct.Otherwise
electricshockmayoccur.
 Wearworkinggloveswheninstallingthe
product.Donotusebarehands.Otherwise,
itmaycausepersonalinjury.
 Ifyouinstalltheproductonaceilingor
slantedwall,itmayfallandresultinsevere
injury.
 Donotfastenthescrewstootightly;thismay
causedamagetotheproductandvoidyour
warranty.
 UseM3x4mmscrewstomountthe
monitor.Anydamagesorinjuriescausedby
misuseoruseofimproperaccessoriesare
notcoveredbythewarranty.
 Ifafixedimagedisplaysonthescreenfora
longperiodoftime,itwillbeimprintedand
becomeapermanentdisfigurementonthe
screen.Thisisimageburnorburn-inandnot
coveredbythewarranty.
 Topreventimagesticking,donotplayastill
imageformorethantwohours.
 Recommendedoperationtimeforoptimum
performanceandreliabilityis12hoursor
lessperday.
CAUTION
CAUTION

11
ENG
ENGLISH
TROUBLESHOOTING
TROUBLESHOOTING
After-imageappearsontheproduct.
Problem Resolution
After-imageappearswhenthe
productisturnedoff.

Ifyouuseafixedimageforalongtime,thepixelsmaybedamaged
quickly.Usethescreen-saverfunction.

Whenadarkimageisdisplayedonthescreenafteranimagewith
highcontrast(blackandwhiteorgray),thismaycauseimagesticking.
ThisisnormalforLCDscreen.
Screencolorisabnormal.
Problem Resolution
Screencolorisunstableor
mono-colored.

ChecktheconnectionstatusoftheLVDScable.

CheckwhethertheLVDScableisconnectedcorrectlyfollowingthe
LVDSPinMapGuide.
Doblackspotsappearonthe
screen?

Severalpixels(red,green,whiteorblackcolor)mayappearonthe
screen,whichcanbeattributabletotheuniquecharacteristicsofthe
LCDpanel.ItisnotamalfunctionoftheLCD.

12
ENG
ENGLISH
SPECIFICATIONS
SPECIFICATIONS
CN1
(51pin)
EEPROM
S1
SCL SDA
S1920
Source Driver Circuit
Timing Controller
LVDS Rx
Intergrated TFT - LCD Panel
(1920 x RGB x 1080 pixels)
[Gate In Panel]
G1
G1080
EPI(RGB)
Control
Signals
Power Signals
LVDS 2Port
LVDS 1,2
I2C
Option
signal
LVDS Select
+12.0V
Power Circuit
Block
ScreenSize 46.96inch(1192.87mm)diagonal
Dimension(WxHxD) 1084.5mmx653mmx11.2mm
PixelPitch 0.5415mmx0.5415mm
PixelFormat 1920horiz.by1080vert.Pixels,RGBstripearrangement
ColorDepth 8Bit(D),16.7Millioncolors
Transmittance(WithPOL) 6.4%(Typ.)
ViewingAngle(CR>10) Viewinganglefree(R/L178(Min.),U/D178(Min.))
PowerConsumption Total6.1W(Typ.)(TBD)
Weight(head) 2.9kg
DisplayOperatingMode Transmissivemode,Normallyblack
SurfaceTreatment(Top) Hardcoating(3H),Anti-glaretreatment(Reflectance<2%),
PossibleDisplayType LandscapeandPortraitEnabled

13
ENG
ENGLISH
SPECIFICATIONS
1084.5
(Unit:mm)
1084.5
105.4 105.4
130 130
160 160
130 130
127.6 127.6
3
3
304.5
304.5
130
130
20-M3TapHole
130
130 11.2
130
130
130
130
130
130
130
130

14
ENG
ENGLISH
LVDSPINMAPGUIDE
LVDSPINMAPGUIDE
PinNo. Symbol Description Note
1 NCorGND NoConnectionorGround
2NC NoConnection 4
3NC NoConnection 4
4NC NoConnection 4
5NC NoConnection 4
6NC NoConnection 4
7 LVDSSelect 'H'=JEIDA,'L'=VESA
8NC NoConnection
9NC NoConnection
10 NC NoConnection
11 GND Ground 1
12 R1AN FIRSTLVDSReceiverSignal(A-)
13 R1AP FIRSTLVDSReceiverSignal(A+)
14 R1BN FIRSTLVDSReceiverSignal(B-)
15 R1BP FIRSTLVDSReceiverSignal(B+)
16 R1CN FIRSTLVDSReceiverSignal(C-)
17 R1CP FIRSTLVDSReceiverSignal(C+)
18 GND Ground 1
19 R1CLKN FIRSTLVDSReceiverClockSignal(-)
20 R1CLKP FIRSTLVDSReceiverClockSignal(+)
21 GND Ground 1
22 R1DN FIRSTLVDSReceiverSignal(D-)
23 R1DP FIRSTLVDSReceiverSignal(D+)
24 NC NoConnection 4
25 NC NoConnection 4
26 NCorGND NoConnectionorGround
27 NC NoConnection 4
28 R2AN SECONDLVDSReceiverSignal(A-)
29 R2AP SECONDLVDSReceiverSignal(A+)
30 R2BN SECONDLVDSReceiverSignal(B-)
31 R2BP SECONDLVDSReceiverSignal(B+)
32 R2CN SECONDLVDSReceiverSignal(C-)
33 R2CP SECONDLVDSReceiverSignal(C+)
34 GND Ground 1
35 R2CLKN SECONDLVDSReceiverClockSignal(-)
36 R2CLKP SECONDLVDSReceiverClockSignal(+)
37 GND Ground 1
38 R2DN SECONDLVDSReceiverSignal(D-)
39 R2DP SECONDLVDSReceiverSignal(D+)
40 NC NoConnection 4
 LCDConnector(CN1):FI-RE51S-HForEquivalent,Refertobelowtable.
 MatingConnector:FI-RE51HL
 Cablelength:1mofcoaxialcableorless

15
ENG
ENGLISH
LVDSPINMAPGUIDE
Note:1.AllGND(ground)pinsshouldbeconnectedtogethertotheLCDmodule’smetalframe.
2.AllVLCD(powerinput)pinsshouldbeconnectedtogether.
3.AllInputlevelsofLVDSsignalsarebasedontheEIA644Standard.
4.#1~#6&#8~#10NC(NoConnection)ThesepinsareusedonlyforLGD(Donotconnect)
5.SpecificpinNo.#44isusedforNosignaldetectionofsystemsignalinterface.
ItshouldbeGNDforNSB(NoSignalBlack)duringthesysteminterfacesignalisnot.
IfthispinisH,LCDModuledisplaysAGP(AutoGenerationPattern).
PinNo. Symbol Description Note
41 NC NoConnection 4
42 NCorGND NoConnectionorGround
43 NCorGND NoConnectionorGround
44 GND Ground 5
45 GND Ground
46 GND Ground
47 NC NoConnection
48 VLCD PowerSupply+12.0V 2
49 VLCD PowerSupply+12.0V 2
50 VLCD PowerSupply+12.0V 2
51 VLCD PowerSupply+12.0V 2

Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual (CD) in an
accessible place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
TemporarynoiseisnormalwhenpoweringONor
OFFthisdevice.