
9
ENG
ENGLISH
ASSEMBLING AND PREPARING
yDisconnect the power cord first before
moving or installing the Monitor. Otherwise
electric shock may occur.
yIf you install the Monitor on a ceiling or
slanted wall, it may fall and result in severe
injury.
yUse only an authorized LG wall mount and
contact a local dealer or qualified personnel.
yDo not over tighten the screws as this may
cause damage to the Monitor and void your
warranty.
yUse only screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
yOnly use screws that are listed on the VESA
standard screw specifications.
yThe wall mount kit will include an installation
manual and necessary parts.
yThe wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
yThe length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
yFor more information, refer to the
instructions supplied with the wall mount.
CAUTION
NOTE
Model E1951S
E2051S
E2251S
E1951T
E2051T
E2251T
E2351T
E2251VR
E2351VR
E2251VQ
E2351VQ
VESA (A x B) 75 x 75
Screw Size M4
Number of screws 4
Wall mount bracket
(optional)
RW120
If intend to mount the Monitor to a wall, an optional
third-party wall mount must be purchased.
When you install the Monitor using the wall
mounting interface (optional parts), attach it
carefully so it will not fall.
1Please use screws and a wall mount interface
in accordance with VESA Standards.
2If you use screws longer than standard, the
monitor might be damaged internally.
3If you use improper screws, the product might be
damaged and drop from mounted position. In
this case, LG Electronics is not responsible for it.
4VESA compatible only with respect to screw
mounting interface dimensions and mounting
screw specifications.
5Please use a VESA standard as below.
y784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ4.0 mm x Pitch 0.7 mm x
Length 10 mm
y787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad
and screws.
A
B
yVESA (A x B)