LG Flatron W2753V User manual

User's Guide
____________________________________________________________________________________________________________________________________________
M_e su_:eto _:eadthe Important Precautions betbre using the product.
KeeptheUselr'sGuide(CD)it1anaccessibleplaceforh_tu,re,:efelrence.
See the labelattachedontheproductandgivetheinformationto your
deNerwhenyouaskforservice.

This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit, In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier, If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement,
The power supply cord is used as the main disconnection device, Ensure that the
socket-outlet is easily accessible after installation,
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display, If you are not sure what type of power supply
you have in your home, consult with your dealer,
Overloaded AC outlets and extension cords are dangerous, So are flayed power
cords and broken plugs, They may result in a shock or fire hazard, Call your service
technician for replacement,
As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off,
Do not Open the Display:
• There are no user serviceable components inside,
• There are Dangerous High Voltages inside, even when the power is OFF,
• Contact your dealer if the display is not operating properly,
To Avoid Personal Injury:
• Do not place the display on a sloping shelf unless properly secured,
• Use only a stand recommended by the manufacturer,
• Do not drop an object on or apply impact to the product, Do not throw any toys
or objects on the product screen,
Itcan cause injury to human, problem to product and damage the display,
To Prevent Fire or Hazards:
• Always turn the display OFF if you leave the room for more than ashort period
of time, Never leave the display ON when leaving the house,
• Keep children from dropping or pushing objects into the display's cabinet
openings, Some internal parts carry hazardous voltages,
• Do not add accessories that have not been designed for this display,
• When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet,
• Inthe presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous, It can cause electric shock,

On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage,
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool,
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation, If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard, Therefore, NEVER:
• Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc,
• Place the display in a built-in enclosure unless proper ventilation is provided,
• Cover the openings with cloth or other material,
• Place the display near or over a radiator or heat source,
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently,
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages,
Some dot defects may appear as Red, Green or Blue spots on the screen,
However, this will have no impact or effect on the display performance,
If possible, use the recommended resolution to obtain the best image quality for
your LCD display, If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen, However, this is
characteristic of the fixed-resolution LCD panel,
Leaving afixed image on the screen for a long time may cause damage to the
screen and cause image burn-in, Make sure to use a screen saver on the product,
Burn-in and related problems are not covered by the warranty on this product,
Do not shock or scratch the front and sides of the screen with metallic objects,
Otherwise, it may cause damage to the screen,
Make sure the panel faces forward and hold it with both hands to move, If you
drop the product, the damaged product can cause electric shock or fire, Contact
an authorized the service center for repair,
Avoid high temperatures and humidity,

On Cleaning
• Unplug the display before cleaning the face of the display screen,
• Use a slightly damp (not wet) cloth, Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock,
• When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching, Do not clean with a wet cloth or spray water or
other liquids directly onto the product, An electric shock may occur, (Do not use
chemicals such as benzene, paint thinners or alcohol)
• Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only, Too much moisture may cause staining,
/
On Repacking
• Do not throw away the carton and packing materials, They make an ideal
container in which to transport the unit, When shipping the unit to another
location, repack it in its original material,
On Disposal
• The fluorescent lamp used in this product contains a small amount of mercury,
• Do not dispose of this product with general household waste,
• Disposal of this product must be carried out in accordance to the regulations of
your local authority,

Connectingthe stand
1o Place the monitor with its front facing downward on a soft cloth,
2. Assemble the stand base into stand body in the correct direction as shown in
the picture, then tighten the screw which is attached to the stand base,
Stand Base
Stand Body Screw
3. Once assembled take the monitor up carefully and face the front side,
Disassembling the stand
1. Place the monitor face clown on the cushion or soft cloth,
2. Loosen the screw which is attached to the stand base, then take off the stand base
from stand body,
Stand Body Stand Base Screw
0

•Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off:
Positioning your display
1. Adjust the position of the panel invarious ways for maximum comfort,
• Tilt Range: -5°-15 °
_5°15 °
•Swivel Range: 355_
355 °

Using the Computer
]. Make sure to turn off the computer and product. Connect the cable as below
sketch map form 0 to (_)
Q Connect DVI-D Cable
Connect D-sub Cable (PC)
Connect D-sub Cable (Mac)
ConnectHDMICable
@
Headphone/Earphone Input
(_) PowerCord(_) S(gnalCable
D-sub DVI
Wall-outlet type
PC_.,
PC
DVI-D(Thisfeatureisnot
availableinallcountries.)
HDMI
i
AV equipment
(Set-TopBox,DVD,Video
Video Game Console)
Macadapter
ForAppleMacletod) use,a separateplugadopterisneeded
tocl'ange the 15pinbigb det)sity(3 row)D-subVGA
connectoronthesuppliedcabletoa 15pin 2 rowconnectoz
2. Touch the power button on the front of panel toturn
the power on. When monitor power is turned on, the
'Self Image Setting Function' is executed
automatically. (Only tothe D-subsignal cable input)

Using the cable holder (This feature is not available in all models.)
Cable holder
!!

Front Panel Controls
GQntrol EunctiQn
sm@tButton Use this button to enter CINEMA MODE,AUTO
BRIGHT,TIME CONTROL,LIVE SENSOR,SMART
items,for more information,refer to page A16.
Fun Button DSUB and DVI input,use this button to enter EZ
ZOOMING,4:3 IN WIDE,PHOTO EFFECT items.
HDMI input,use this button to enter 4:3 IN WIDE,
PHOTO EFFECT,VOLUME items.
For more information,refer to page A17 -A18.
MENU Button Use this button to enter or exit from the On Screen Display.
OSD LOCKED/UNLOCKED
This functionallowsyou tolockthe currentcontrolsettings,so
thatthesesettingsarenotinadvertentlychanged.To lockthe
OSDsettings,pressandhold theMENUbutton forseveral
seconds.Themessage"OSD LOCKED"appears.
You can unlock the OSD settings at any time by
pushing the MENU button for several seconds. The
message "OSD UNLOCKED" appears.

.... ContrQI Eunction
V A Buttons Use these buttons to select or adjust functions in the On
ScreenDisplay.
YButton
( 3_"ENGINE )
For more information, refer to page A19 -A20.
,4_ Button
(SOURCE)
AUTO/SET
Button
Use this button to make either D-Sub,DVI or HDMI
connector active. This feature is used when two
computers are connected to the display. The default
setting is D-Sub.
Usethis buttontoselectan iconin theOn Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On
Screen Display(OSD). This will automatically adjust
your display image to the ideal settings for the
current screen resolution size (display mode).
The best display mode is:
W2753V'1920 x 1080
O Power Button Use this button to turn the display on or off.
Power Indicator This Indicator lights up as red when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color
changes to flicker.
O Light Sensor This is lens for light sensor sletect outside luminance,
when setting AUTO BRIGHT ON.

Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
I Press the MENU Button, then the main menu of the OSD appears,
To access acontrol, use the AorV Buttons, When the icon you want
becomes highlighted, press the AUTO/SET Button,
Use the _K /_T Buttons to adjust the image to the desired level, Use the
AUTO/SET Button to select other sub-menu items,
Push the MENU Button once to return to the main menu to select another
function, Push the M ENU Button twice to exit from the OSD,

The following table indicates all the On Screen Display control, adjustment,
and setting menus.
CINEMA MODE @ @
AUTO BRIGHT @ @ @
TIME CONTROL @ @ @
LIVE SENSOR @ @ @
SMART @ @ @
EZZOOMING @ @
4:31NWIDE @ @ @
NORMAL @ @
PHOTO GAUSSlAN BLUR @ @
EFFECT SEPIA @ @
MONOCHROME @ @
VOLUME @
BRIGHTNESS @ @ @
CONTRAST @ @ @
PICTURE GAMMA @ @ @
sRGB @ @ @
PRESET 6500K @ @ @
9300K @ @ @
COLOR RED @ @ @
GREEN @ @ @
BLUE @ @ @
HORIZONTAL @
VERTICAL @,
TRACKING CLOCK @
PHASE @
SHARPNESS @' @ @
LANGUAGE @ @ @
OSD HORIZONTAL @ @ @
POSITION VERTICAL @' @ @
SETUP iTE_ N E _ '._
!!_ _!!!i!!:!!i!!:!!!i!!:!!i!!:!!!i!!:!!i!!:!!!i!!:!!i!!:!L.iiiiiiill,iliiiiilll,ili..illi_l!iii
RTC @ @ @
POWER INDICATOR @ @ @
FACTORY RESET @ @ @
MOVIE @,
FLATRON USER @ @ @
F-ENGINE
To focus on the moving picture selected.
To control screen brightness automatically.
To mind user using time.
To control touch key distance.
To control smart key menu.
To adjust the resolution
To adjust the image size
To adjust screen color mode
To adjust the volume
To adjust the brightness, contrast and
gamma of the screen
To set offset level
To costomize the color of the screen
To adjust the position of the screen
To improve the clarity and stability of the
screen
To costomize the screen status for a
user's operating environment
To select or customize desired image
settings
o : Adjustable
* : onlyfor DSUB/DVI Input
** : only for HDMI Input
A : DSUB Input
D : DVI Input
H : HDMI Input

You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Main Menu
SETUP
Button Tip
Icons m

PICTURE
DSUB/DVI input BRIGHTNESS
CONTRAST
GAMMA
HDMI input BLACK LEVEL
To adjust the brightness of the screen.
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
You can set the offset level. If you select
'HIGH', the screen will be bright and ifyou
select 'LOW', the screen will be dark.
(onlyfor HDMI input)
*Offset? As thecriteria for video signal, it is the
darkest screen the monitor can show.
• MENU : Exit
•¥: Decrease
•A:Increase
• SET : Select another sub-menu
COLOR
PRESET
[] RED
GREEN
•MENU : Exit
•¥: Decrease F_/BLUE
• A :Increase
• SET : Select another sub-menu
* sRGB: Set the screen color to fit the
SRGB standard color
specification.
* 6500K: Slightly reddish white.
* 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.

TRACKING
HORIZONTAL To move image left and right.
VERTICAL To move image up and down.
• MENU : Exit
•y: Decrease
• A :Increase
• SET : Select another sub-menu
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display.
This item allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
To adjust the clearness of the
screen.
1

DSUB/DVI input
HDMI input
SETUP LANGUAGE
OSD
POSITION
WHITE
BALANCE
OVERSCAN
RTC
•MENU : Exit
•" I"Adjust
Adjust
• SET" Select another sub-menuPOWER
INDICATOR
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
Ifthe output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for DSUB input)
To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
Recommend overscan function to turn
on when connect AV equipment.
Ifyou set ON, you enable the Response
Time Control function.
Ifyou set OFF, you disable the
Response Time Control function.
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
Ifyou set OFF, it will go off.
Ifyou set ON at any time, the power
indicator will automatically be turned on.
FACTORY
RESET Restoreall factorydefault settingsexcept
"LANGUAGE."
PresstheA ,V buttonsto resetimmediately.
Ifthisdoes not improvethe screenimage, restorethe factorydefaultsettings.
Ifnecessary,performthe white balancefunctionagain. Thisfunctionwill be enabledonlywhen
the inputsignal isan analog signal.

TheOSDscreenwillappearwhenyoutouchthesmart button on the right bottomof the
monitor.
CINEMA MODE Itfocuses better on the moving picture in
selected area.
*This function is operated only ifthe
fortemanager is installed to pc.
*Only for DSUB and DVI input.
AUTO BRIGHT Ifselect on,it automatically controls the
brightness of display to best suit the
surrounding working environment, providing
the optimal viewing condition and maximized
user convenience.
Ifselect off,auto brightness is off.
TIME CONTROL Remind user using time by showing alarm
OSD and flickering LED.
Selection:OFF/1 HOUR/2HOUR
LIVE SENSOR This function turns on the button LED for
pushing comfortable.When detect the
presence of users hand before touch it.
SMART To adjust AUTO BRIGHT,TIME CONTROL,
LIVE SENSOR.
Ifselect ON itturns on AUTO BRIGHT, LIVE
SENSOR and makes time CONTROL to 1HOUR.
Ifselect off,it turns off those.
Ifset AUTO BRIGHT,TIME CONTROL,LIVE
SENSOR directly,this setting is changed to
USER automatically.

TheOSDscreenwillappearwhenyoutouchtheFun
monitor.
DSUB/DVI input
PHOTO
EFFECT
button on the left bottomof the
HDMI input
EZ ZOOMING EZ Zoom lowers the display's resolution in
single-step increments. Depressing the button
once lowers the resolution by one step; while a
second button-press returns the resolution to
the original display settings.
*This function is operated only ifthe
forteManager is installed to PC.
*ForteManager is not supported in HDMI input.
4:3 IN WIDE To select the image size ofthe screen.
• WIDE : Switch tofull screen mode according to input
image signal.
• 4 •3 : Change the image signal ratiointo 4:3.

_gg
To select the color ofthe screen
PHOTO EFFECT
•NORMAL :
The PhotoEffect function is disabled.
• GAUSSlAN BLUR :
This option is to add the effect to the screen that
the dark and sharp image becomes brighter and
more blurred.
•SEPIA :
This option changes the screen to be Sepia tone.
The Sepia tone is brown color tone.
•MONOCHROME :
This option changed the screen to be Gray tone.
The screen image is displayed with just white,
black, gray colors.
SEPIANORMAL GAUSSIANBLUR MONOCHROME
*Photo Effect feature may not work in HDMI Input.
(Photo effect operate at DSUB format)
VOLUME To adjust the volume of headphone/Earphone.
(Only for HDMI input)

TheOSDscreenwillappearwhenyoutouchthe._ENGINEbuttonontheleftbottomof
themonitor.
J'ENGINE ! _[_i_ii_l.i_i _
Sub-menu
f;ENG_NE ,,-__,_ MOVIE Select thiswhen you are watching a video or
movie.
DSUB/DVI input
_E_G_NE _,. INTERNET Select thiswhen you are workingon the
document (Word etc.)
Select thiswhen you are playing a game.
NORMAL Select thiswhen you want to use the product in
the mostgeneral using environment.
* Normalmodeis whenf-ENGINEis turnedoff.
HDMI input
STANDARD
Select thiswhen you want to use the original
standard video.
* In the General (Standard) mode, the ._ENGINE
is turned off.