LG ST-1630F User manual

OWNER’S MANUAL
Stand For LGLEDScreen
Please read this manual carefully before install & operating your set and retain it for future
reference.
ST-1630F Stand Installation
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved

1
Technical Data
Model name
ST-1630F
Material
Aluminum Profile,Steel
Surface Finish
Power Coating (Matte Black)
Recommended Screen Size
163’’
Allowable Loads
300kg (Maximum)
Lift Range
0/200/400mm
Certification
CB,CE-LVD,ETL,RoHS2.0
Stand Dimension (W x D x H)
3097 x 1420 x 2200mm
3097 x 1420 x 2400mm
3097 x 1420 x 2600mm
Stand Base Dimension (W x D x H)
2007 x 1420 x 63mm
Caster Wheel Size (Diameter)
63mm
Wooden Case Dimension (W x D x H)
2088 x 1536 x 620 mm
Weight (Net/Gross)
150kg/230kg
This model (ST-1630F) is a stand for the LAEC018-GN2 AIO model only.
The stand has 3 levels to change the height of the screen and comes assembled as LEVEL 1.
The height can be changed if needed, and it is described on the page of 4.
The distance from the floor to the bottom of the screen is shown in the table.
Determine the height of your SCREEN and proceed first if you need to change the height of
the STAND.
Level
Height
Level 1
≈32cm
Level 2
≈52cm
Level 3
≈72cm
< Height: Level 1 >
< Height: Level 2 >
< Height: Level 3 >

2
Packing List
Item
Description
Photo
Qty.
1
Stand Base
1
2
Right Vertical Support Column
1
3
Left Vertical Support Column
1
4
Mounting Frame Horizontal Left
2
5
Mounting Frame Horizontal Right
2
6
Mounting Frame Horizontal
Reinforcing Rib
2
7
Mounting Frame Horizontal
Support Part
1
8
Mounting Frame Left Part
1
9
Mounting Frame Right Part
1
10
Mounting Frame Middle Left
1
11
Mounting Frame Middle Right
1
12
Screw M8X20mm
30

3
13
Screw M4X15mm
48
14
Screw M6X20mm
76
15
8mm Hex Key
1
16
Anti-Static Gloves
4
17
Screwdriver
1

4
Adjust the stand height (item 2& item 3)
Step1. Loosen the screw as the following position.
Step2. Fixing the screw as following position is Level 2 and Level 3
< Front View >
< Rear View >
< Front View >
< Rear View >
: The position is for Level 3
: The position is for Level 2

5
Step3. Follow the steps below(from page 6) to connect the plate
< Level 1 >
< Level 2 >
< Level 3 >

6
Assemble the stand
Step1. Install the main body (Vertical Support Column) to the stand base.
Note: The front of the vertical support column is where the tapped holes for the screws
are visible.
Use 30pcs M8X20 screws (Item 12) to install the Item 2 and Item 3
on the stand base (Item 1).

7
Step2. Connect the panel mounting plate.
< Side View >
Step3. Make one more in the same way as step 2.
Step4. Install the panel mounting plate to Vertical Support Column.
Use 24pcs M4X15 screws (Item 13) to connect Item 6
to the Item 4 and Item 5.
Use 36pcs M6X20 (Item 14) hexagon socket head cap screws to install Item 7
and assembly parts in step 2 onto Item 2 and Item 3.
< Front View >

8
Step5. Install the panel mounting plate to the main body mounting bracket.
Use 40pcs M6X20 (Item14) hexagon socket head cap screws to install
Item10, Item11, Item8 and Item9 to the main body mounting bracket.

9
Hex screw + Mounting lock
< Rear View >
Screen assembly
The 12 PCS fixed screw behind the cabinet are assembled to the cabinet and locked with
tools.
< Right Cabinet >
< Middle Cabinet >
< Left Cabinet >
Note: Please follow the order of the arrows to install the screen.