LG ND2530 User manual

ND2530
OWNER’S MANUAL
Wireless Speaker with
Lightning Dock
MUSIC IN STYLE
Please read this manual carefully before operating
your set and retain it for future reference.
ENGLISH
www.lg.com
ND2530-BS.BUSALLK_MFL67884215.indd 1ND2530-BS.BUSALLK_MFL67884215.indd 1 2013-04-02 10:54:262013-04-02 10:54:26

Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.
WARNING: This product contains chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
after handling.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
NOTICE: For safety marking information including
product identication and supply ratings, please
refer to the main label on the bottom of the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where
the cord exits the appliance. To disconnect power
from the mains, pull out the mains cord plug. When
installing the product, ensure that the plug is easily
accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste.
It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
ND2530-BS.BUSALLK_MFL67884215.indd 2ND2530-BS.BUSALLK_MFL67884215.indd 2 2013-04-02 10:54:352013-04-02 10:54:35

Getting Started 3
Getting Started
1
FCC Compliance Statement
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment
and receiver.
yConnect the equipment into an outlet on a
circuit dierent from that to which the receiver is
connected.
yConsult the dealer or an experienced radio/TV
technician for help.
CAUTION: Any changes or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
FCC RF Radiation Exposure Statement : This
equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body. End users must follow the
specic operating instructions for satisfying RF
exposure compliance. This transmitter must not be
co-located or operating in conjunction with any
other antenna or transmitter.
CAUTION: Regulations of the FCC and FAA prohibit
airborne operation of radio-frequency wireless
devices because their signals could interfere with
critical aircraft instruments.
Responsible Party :
LG Electronics USA, Inc.1000 Sylvan Avenue
Englewood Clis, NJ 07632
TEL. : [phone]
ND2530-BS.BUSALLK_MFL67884215.indd 3ND2530-BS.BUSALLK_MFL67884215.indd 3 2013-04-02 10:54:352013-04-02 10:54:35

Getting Started4
Getting Started
1
MPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
ND2530-BS.BUSALLK_MFL67884215.indd 4ND2530-BS.BUSALLK_MFL67884215.indd 4 2013-04-02 10:54:362013-04-02 10:54:36

Table of Contents 5
1
2
3
4
Table of Contents
1 Getting Started
2 Safety Information
6 Main Features
6 Accessories
6 Introduction
7 Remote Control
8 Front Panel
8 Rear Panel
9 Connecting the AC Adapter
9 How to Attach the Ferrite Core (For EMI
Only)
2 Operating
10 Basic Operations
10 – Switch to Standby mode
10 – Switch to Power Off
10 – iPod/iPhone/iPad Operations
11 – Compatible iPod/iPhone/iPad
13 – Turning Off the Sound Temporarily
13 – Auto Power Down
13 – Setting BASS sound effect
13 – Listening to Music from Your Portable
Device
14 Using a Bluetooth Wireless Technology
14 – Listening to Music of a Bluetooth
Device
15 Using Bluetooth App
3 Troubleshooting
17 Troubleshooting
4 Appendix
18 Trademarks and Licenses
18 Handling the Unit
19 Specifications
ND2530-BS.BUSALLK_MFL67884215.indd 5ND2530-BS.BUSALLK_MFL67884215.indd 5 2013-04-02 10:54:362013-04-02 10:54:36

Getting Started6
Getting Started
1
Main Features
Made for iPod/iPhone/iPad
Enjoys music from iPod/iPhone/iPad with simple
connection.
Portable In
Listens to music from your portable device.
Bluetooth®
Enjoys music from Bluetooth device with simple
connection.
BASS
Reinforce BASS sound effect.
LG Bluetooth Remote
You can control this unit with your iPod/iPhone/
iPad via Bluetooth. This unit and your iPod/iPhone/
iPad must be connected to Bluetooth APP. Visit“
Apple App Store” and use this QR code to search
for “LG Bluetooth Remote”app. For detailed infor-
mation, refer to the 16 page.
(Apple iOS)
Accessories
Please check and identify the supplied accessories.
Remote control (1) Battery (1)
Power cord(1) AC adapter(1)
Introduction
Symbol Used in This Manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
ND2530-BS.BUSALLK_MFL67884215.indd 6ND2530-BS.BUSALLK_MFL67884215.indd 6 2013-04-02 10:54:362013-04-02 10:54:36

Getting Started 7
Getting Started
1
Remote Control
1(Power): Switches the unit ON or OFF.
PFUNCTION : Selects the function and input
source.
+/- (Volume) : Adjusts volume of speaker.
BASS EQ : Reinforce BASS sound effect.
Y/U(Skip/Search) :
-Skips fast Backward or Forward.
-Searches for a section within a file.
(Play/Pause) : Starts or pause playback
@(Mute) : Mutes the sound.
?:The button is not available for any function.
The battery used in this device may present a
re or chemical burn hazard if mistreated. Do
not recharge, disassemble, incinerate, or heat
above 100 °C (212 °F). Replace the battery part
no. CR2025 only. Use of another battery may
present a risk of re or explosion. Dispose of
used battery. Keep battery away from children.
Do not disassemble or dispose of in re.
> Caution
Battery Installation
You have two ways to open the battery cover.
1. Turn the battery cover counterclockwise by
using a coin or your finger. Then take the battery
cover.
Coin Finger
2. Insert and fix the battery with the plus (+)
facing in the same direction as the plus (+) on
the battery cover.
3. Put the battery cover on the remote control and
turn it clockwise to close.
Coin Finger
If you have long nails, do not open the battery
cover by using your nger. Or else, your nail
would be broken.
> Caution
ND2530-BS.BUSALLK_MFL67884215.indd 7ND2530-BS.BUSALLK_MFL67884215.indd 7 2013-04-02 10:54:372013-04-02 10:54:37

Getting Started8
Getting Started
1
Front Panel
aiPod/iPhone Dock (Lightning Connector)
bSupport for iPod/iPhone
c Speaker
d Display Window
Displays each of functions.
e1/F (Power/Function)
- Power on : Press 1/Fto turn the unit on.
- Power o : Press and hold 1/Ffor about 3
seconds to turn the unit o.
-Selects the function and input source.
+/- (Volume)
Adjusts volume of speaker.
Rear Panel
aBASS
Reinforce BASS sound effect.
b(USB)
Plays the audio les using your USB cable for
iPod/iPhone/iPad.
cPORT.IN
Listens to music from your portable device.
dDC IN (AC adapter input)
Connects the supplied AC adapter.
ND2530-BS.BUSALLK_MFL67884215.indd 8ND2530-BS.BUSALLK_MFL67884215.indd 8 2013-04-02 10:54:372013-04-02 10:54:37

Getting Started 9
Getting Started
1
Precautions in using the touch buttons
yUse the touch buttons with clean and dry
hands. - In a humid environment, wipe out
any moisture on the touch buttons before
using.
yDo not press the touch buttons hard to
make it work. - If you apply too much
strength, it can damage the sensor of the
touch buttons.
yTouch the button that you want to work in
order to operate the function correctly.
yBe careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
> Caution
Connecting the AC
Adapter
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet. Then
the unit goes into standby mode.
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
> Caution
How to Attach the
Ferrite Core (For EMI
Only)
You must ax the cores (supplied with the model
you purchased) in order to reduce or eliminate
electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the portable cable and USB cable on the
ferrite core.
3. Close the ferrite core until it clicks.
ND2530-BS.BUSALLK_MFL67884215.indd 9ND2530-BS.BUSALLK_MFL67884215.indd 9 2013-04-02 10:54:372013-04-02 10:54:37

Operating10
Operating
2
Basic Operations
Switch to Standby mode
Press 1 or press and hold 1/F. The LED
indicators light up and the last function you
selected blinks.Then the unit switches to standby
mode.
Switch to Power Off
Press 1 or press and hold 1/F. The LED
indicators light o and the unit switches to power
o.
iPod/iPhone/iPad Operations
You can enjoy the sound from your iPod/iPhone/
iPad through this unit. For details about iPod/
iPhone/iPad, refer to the iPod/iPhone/iPad User
Guide.
Enjoying Music by Docking Your
iPod/iPhone(Lightning Connector)
to the Unit
1. Install iPod/iPhone(Lightning Connector)
support.
2. Dock the iPod/iPhone(Lightning Connector)
firmly. If you turn this unit on, your iPod/iPhone
is automatically turned on and starts recharging
.
3. Press
PFUNCTION or 1/F to select
(IPOD) function.
ND2530-BS.BUSALLK_MFL67884215.indd 10ND2530-BS.BUSALLK_MFL67884215.indd 10 2013-04-02 10:54:382013-04-02 10:54:38

Operating 11
Operating
2
Enjoying Music by Connecting Your
iPod/iPhone/iPad(30 Pin/Lighting
Connector) to the Unit
1. Connect iPod/iPhone/iPad (30 Pin/Lightning
Connector) to the USB port on the unit by using
the iPod/iPhone/iPad cable. If you turn this unit
on, your iPod/iPhone/iPad (30 Pin/Lightning
Connector) will be automatically turned on and
start recharging.
2. Press
PFUNCTION or 1/F to select
(USB) function. You can operate your iPod/
iPhone/iPad (30 Pin/Lightning Connector)
through an iPod/iPhone/iPad (30 Pin/Lightning
Connector)’s display by using the remote
control and controlling your iPod/iPhone/iPad
(30 Pin/Lightning Connector).
Compatible iPod/iPhone/iPad
yThe unit supports the models as follows ;
iPhone 5
iPhone 4S
iPhone 4
iPhone 3GS
iPad 3G, 4G
iPad 2
iPad
iPad mini
iPod touch 3G, 4G, 5G
iPod nano 4G, 5G, 6G, 7G
Depending on your iPod/iPhone/iPad’s software
version, you may not control your iPod/iPhone/
iPad from the unit.
To Do this
Pauses or
restart Press .
Skip
During playback, press Y/
Uto go to the next le or to
return to the beginning of the
current le.
Playing less than 2 seconds,
press Yto go to the previous
le.
Playing after 3 seconds, press
Yto go to the beginning of
the le.
Search
Press and hold Y/U
during playback and release it at
the point you want to listen to.
ND2530-BS.BUSALLK_MFL67884215.indd 11ND2530-BS.BUSALLK_MFL67884215.indd 11 2013-04-02 10:54:382013-04-02 10:54:38

Operating12
Operating
2
yIf iPod/iPhone/iPad operation has an error,
check these problems as follows;
- Your iPod/iPhone/iPad is not connected
firmly.
- This unit recognizes your iPod/iPhone/
iPad as an unknown device.
- Your iPod/iPhone/iPad is exceptionally
low in power.
/The battery needs to be charged.
/
If you charge the battery while iPod/
iPhone/iPad is extremely low in power,
it may take longer to be charged.
yDepending on your iPod/ iPhone/ iPad ’s
software version, it may not be possible to
control your iPod/ iPhone/ iPad from this
unit. We recommend installing the latest
software version.
yIf you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch/iPhone/iPad, disconnect it from
this unit and then use it.
yIf you have a problem with your iPod/
iPhone/iPad, please visit www.apple.com/
support.
yIn standby mode, you can charge your iPod/
iPhone/iPad.
yYou may need additional operation for iPod
touch/iPhone/iPad, for example“unlock”
before you use.
, Note
ND2530-BS.BUSALLK_MFL67884215.indd 12ND2530-BS.BUSALLK_MFL67884215.indd 12 2013-04-02 10:54:382013-04-02 10:54:38

Operating 13
Operating
2
Turning Off the Sound
Temporarily
Press @to mute the sound. You can mute
the sound in order, for example, to answer the
telephone. To cancel mute function, press @
again or adjust volume level by pressing +/-
(Volume).
Auto Power Down
This unit will power itself down to save electronic
consumption in case main unit is not connected to
external device and is not used for 25 minutes.
Also this unit will power down if no input is
connected using the analogue input after six hours.
Setting BASS sound effect
You can listen to music by setting BASS sound
eect. Press BASS EQ or BASS repeatedly.Then
you can reinforce BASS sound eect.
Listening to Music from Your
Portable Device
The unit can be used to play the music from many
types of portable device. (Portable cable is not
supplied as an accessory with this unit.)
1. Connect the portable device to the PORT.
IN connector of the unit.
2. Turn the power on by using 1or 1/F.
3. Select the (PORTABLE) function by pressing
PFUNCTION or 1/F.
4. Turn the portable device on and start playing it.
ND2530-BS.BUSALLK_MFL67884215.indd 13ND2530-BS.BUSALLK_MFL67884215.indd 13 2013-04-02 10:54:382013-04-02 10:54:38

Operating14
Operating
2
Using a Bluetooth
Wireless Technology
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters.
(The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.)
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain proles.
This unit is compatible with following prole.
A2DP (Advanced Audio Distribution Prole)
Listening to Music of a
Bluetooth Device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the
PFUNCTION or 1/F. Bluetooth LED ”
“blinks in the display window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit appears as “LG Docking
(XX:XX)”.
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such
as 9C:02:98:4A:F7:08, you will see “
LG Docking
(F7:08)” on your Bluetooth device.
, Note
3. Enter the PIN code.
PIN code : 0000
4. When this unit successfully is connected with
your Bluetooth device,“Bluetooth” LED stop
blinking.
yDepending on the Bluetooth device type,
some device have a dierent pairing way.
yTry pairing procedure if your device name is
not in the device list.
, Note
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
According to your Bluetooth device’s volume
level, the volume level of Bluetooth will be
adjusted.
ySound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
yWhen you use the Bluetooth function,
adjust the volume of a Bluetooth device to
a proper level to listen to.
, Note
ND2530-BS.BUSALLK_MFL67884215.indd 14ND2530-BS.BUSALLK_MFL67884215.indd 14 2013-04-02 10:54:392013-04-02 10:54:39

Operating 15
Operating
2
yAfter your device is connected to the unit
via Bluetooth, the function switches to BT
automatically.
yAfter searching for this unit on your
Bluetooth device, connect the Bluetooth
device to this unit. Then play music you
want.
yThe sound may be interrupted when
the connection interfered by the other
electronic wave.
yYou cannot control the Bluetooth device
with this unit.
yPairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yAlthough the distance between your
Bluetooth and the set is less than 10m, there
are obstacles between both, your Bluetooth
device cannot be connected.
yDepending on the type of the device,
you may not be able to use the Bluetooth
function.
yYou can enjoy wireless system using phone,
MP3, Notebook, etc..
yWhen not connected the Bluetooth, “ ”
LED blinks in the display window.
yThe Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
yWhen someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yIf the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower. The connection will be
disconnected when the space between
the Bluetooth and the unit gets out of the
operating range of Bluetooth.
yThe device with Bluetooth wireless
technology is disconnected, if you turn o
the main unit or put the device away from
the main unit more than 10m.
yIf the Bluetooth device is disconnected, you
should connect the Bluetooth device to
your unit.
, Note Using Bluetooth App
About LG Bluetooth Remote App
LG Bluetooth Remote app bring a suite of new
features to your unit. To enjoy more features, you
are recommended to download and install free “
LG Bluetooth Remote”.
BT app will be available in the
software version
4.3(or late). Connect your device
to the unit using setting display in your device, not
BT app.
Install “ LG Bluetooth Remote App”
through “ Apple App Store”.
1. Tap the Apple App Store icon .
2. In the search bar, type in the “LG Bluetooth
Remote” and search it.
3. In the search result list, find and tap “LG
Bluetooth Remote” to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
yMake sure that your powered Bluetooth
device is connected to the Internet.
yMake sure that your powered Bluetooth
device is equipped with “ Apple App Store”.
yIf you want to get more information, refer to
explanation of BT app in “Apple App Store”.
, Note
ND2530-BS.BUSALLK_MFL67884215.indd 15ND2530-BS.BUSALLK_MFL67884215.indd 15 2013-04-02 10:54:392013-04-02 10:54:39

Operating16
Operating
2
Install “ LG Bluetooth Remote App”
by using QR code
1. Install “ LG Bluetooth Remote app” by using QR
code. Use the scanning software to scan the QR
code.
2. Tap an icon for installation.
3. Tap an icon for downloading.
(Apple iOS)
yMake sure that your powered Bluetooth
device is connected to the Internet.
yMake sure that your powered Bluetooth
device has a scanning software application.
If you don’t have one, download one from
“ Apple App Store” .
, Note
Activate Bluetooth with LG
Bluetooth Remote App
LG Bluetooth Remote app helps to connect your
powered Bluetooth device to the unit.
After performing the pairing operation, activate
Bluetooth with LG Bluetooth Remote App.
1. Tap LG Bluetooth Remote app icon on
your device’s screen to open LG Bluetooth
Remote app application, and go to the main
menu.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and [Help].
yBT app will be available in the software
version as follow;
iOS O/S : Ver 4.3(or late)
yIf you place your
iPod/iPhone(Lightning
Connector)
onto the dock of this unit
after Bluetooth connection, the Bluetooth
connection is deactivated.
yWhile using Bluetooth, you may not activate
BT app. Disconnect Bluetooth device you have
connected before to use BT app properly.
yIf you use Bluetooth app for operation,
there would be some dierences between
Bluetooth app and the supplied remote
control. Use the supplied remote control as
necessary.
yIf you operate BT app with Bluetooth
device connected, the Bluetooth
connection you have connected before
may be disconnected. (Depending on
the smartphone’s O/S, this process has a
dierence.)
yDepending on the Bluetooth device, BT.app
may not work.
yIn Bluetooth function, if you use BT app, the
supplied remote control may not work.
yWhen using BT app for remote control, the
operation may dier from the supplied
remote control.
yDepending on the type of operating system, you
have some dierences for BT app’s operation.
yWhen your Bluetooth device have been
already connected with other unit, disconnect
the Bluetooth connection rst. Then you can
control your player through BT app.
yThe connection you’ve made may be
disconnected if you select other application or
change the setting of the connected device
via BT app. In such case, please check the
connection status.
yDon’t connect your Apple device by using
a cable to USB port. Or else the Bluetooth
connection will be disconnected.
yAfter connection of BT app, music may be
output from your device. In this case, try
connecting procedure again.
yTo prevent a malfunction, you are
recommended to connect only one device
to this unit.
, Note
ND2530-BS.BUSALLK_MFL67884215.indd 16ND2530-BS.BUSALLK_MFL67884215.indd 16 2013-04-02 10:54:392013-04-02 10:54:39

Troubleshooting 17
Troubleshooting
3
Troubleshooting
Problem Correction
No Power.
yPlug in the power cord.
yCheck the condition by operating other electronic devices.
No sound.
yPress PFUNCTION or 1/Fand then check the selected function.
yAdjust volume of your portable device.
The remote control does not
work properly.
yOperate the remote control within about 23 ft (7 m).
yRemove the obstacle in the path of the remote control and the unit.
yReplace the battery with new one.
iPod/iPhone/iPad does not
work. Connect iPod/iPhone/iPad to the unit correctly.
ND2530-BS.BUSALLK_MFL67884215.indd 17ND2530-BS.BUSALLK_MFL67884215.indd 17 2013-04-02 10:54:402013-04-02 10:54:40

Appendix18
Appendix
4
Trademarks and
Licenses
“Made for iPod,”“Made for iPhone,” and “Made for
iPad”mean that an electronic accessory has been
designed to connect specically to iPod, iPhone,
or iPad, respectively, and has been certied
by the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod, iPhone, or
iPad may aect wireless performance.
Bluetooth®wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
Handling the Unit
When Shipping the Unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the Exterior Surfaces Clean
Do not use volatile liquids such as insecticide spray
near the unit.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the Unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
ND2530-BS.BUSALLK_MFL67884215.indd 18ND2530-BS.BUSALLK_MFL67884215.indd 18 2013-04-02 10:54:402013-04-02 10:54:40

Appendix 19
Appendix
4
Specifications
General
AC adapter requirements DC 12 V 02.5 A, 100 -240 V, 50/ 60 Hz
Power consumption 25 W
Dimensions (W x H x D) 275 X 90 X 170 mm
Net Weight (Approx.) 1.3 kg
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 5 % to 90 %
Inputs
PORT. IN 500 mV (3.5 mm stereo jack)
USB
USB Version USB 1.1
Bus Power Supply USB : DC 5 V 02.1 A, iPod/iPhone : DC 5 V 02.5 A
Amplier
Output Power 5 W + 5 W (8 Ω at 1 kHz)
T.H.D 10 %
Speakers
Type built-in
Impedance Rated 8 Ω
Rated Input Power 5 W
Max. Input Power 10 W
yDesign and specications are subject to change without notice.
ND2530-BS.BUSALLK_MFL67884215.indd 19ND2530-BS.BUSALLK_MFL67884215.indd 19 2013-04-02 10:54:402013-04-02 10:54:40

LG Customer Information Center
1-800-243-0000 USA, Consumer
1-888-865-3026 USA, Commercial
Register your product Online!
www.lg.com
Printed in Indonesia
ND2530-BS.BUSALLK_MFL67884215.indd 20ND2530-BS.BUSALLK_MFL67884215.indd 20 2013-04-02 10:54:402013-04-02 10:54:40