LG SK4D Specification sheet

SIMPLE MANUAL
Wireless
Sound Bar
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
MODEL
SK4D
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL
www.lg.com
MFL70585655
Copyright © 2018-2019 LG Electronics Inc. All Rights Reserved.
1904_Rev03
SK4D.DEUSLLK_SIM_ENG_MFL70585655 (Optical ).indd 1 2019-04-01  2:55:02

Front Panel
··································Standby / On
·······························Selects Function
·························Adjusts Volume
Rear Panel
DC IN ·················· Connect to the AC adapter
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
USB/··················Connect to a USB device
If the optical cable is not connected in the
correct direction, it may cause damage of
optical jack.
Subwoofer Connection1
The buttons are located on the rear. Place the wireless subwoofer near the sound bar and
follow steps below.
aConnect the power cord of the sound bar and
the wireless subwoofer to the outlet.
bTurn on the sound bar.
cThe sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
yellow green LED turns on.
Manual Subwoofer Connection
If the subwoofer does not make sound, try to
connect manually.
aPress PAIRING button on the rear of the
wireless subwoofer.
yThe yellow green LED on the front of the
wireless subwoofer blinks quickly.
(If the yellow green LED does not blink, press
and hold the PAIRING button.)
bTurn on the sound bar.
cPairing is completed.
yThe yellow green LED on the front of the
wireless subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m to prevent wireless
interference.
>
1 m
SK4D.DEUSLLK_SIM_ENG_MFL70585655 (Optical ).indd 2 2019-04-01  2:55:06

ASC/STANDARD/CINEMA: Selects the sound effect.
NIGHT ON/OFF: Turns down the volume at night.
WOOFER LEVEL +/-: Adjusts the volume level of
subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Replacement of battery
Remote control
aConnect the sound bar to the TV using Optical
cable.
bSet up [External Speaker (Optical)] on your TV
setting menu.
TV
Additional Device Connection
aConnect to the external device as follows.
TV
(Set-top Box,
Player etc.)
bSet the input source by pressing Frepeatedly.
TV Connection2
SK4D.DEUSLLK_SIM_ENG_MFL70585655 (Optical ).indd 3 2019-04-01  2:55:07

Specication
Power
consumption
Refer to the main label.
Networked standby : 0.5 W
(If all network ports are
activated.)
AC adapter
yModel : DA-38A25
yManufacturer : Asian Power
Devices Inc.
yInput :
100 - 240 V ~ 50 - 60 Hz
yOutput : 25 V 01.52 A
Dimensions
(W x H x D)
Approx.
890.0 mm x 53.0 mm x 85.0 mm
Without foot
Bus Power
Supply (USB) 5 V 0500 mA
Amplier
(Total RMS
Output power)
300 W RMS
Design and specications are subject to change
without notice.
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and
turn off the unit.
Additional Information
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment
type Wireless Sound Bar is in compliance with Directive
2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be
installed and operated with a minimum distance of 20
cm between the device and the body.
Frequency range Output power (Max.)
2402 to 2480 MHz 10 dBm
5730 to 5821 MHz 13 dBm
SK4D.DEUSLLK_SIM_ENG_MFL70585655 (Optical ).indd 4 2019-04-01  2:55:07