LG CM2030 User manual

Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 2004/108/EC, 2006/95/EC, 2009/125/EC
and 2011/65/EU.
Contact oce forcomplianceof this product :
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
Please note that this is NOT a Customer Service
contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you
purchased this product.
CM2030-DU_AESPLLB_ENG.indd 3 2013-06-19  3:08:49
http:\\www.direcTutor.com

Getting Started4
Getting Started
1
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4. For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
CM2030-DU_AESPLLB_ENG.indd 4 2013-06-19  3:08:50
http:\\www.direcTutor.com

Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique Features
6 Accessories
6 Playable file Requirement
6 – MP3/WMA music file requirement
7 – Compatible USB Devices
7 – USB device requirement
8 Remote Control
10 Front Panel
11 Rear Panel
2 Connecting
12 Connecting to speakers
12 – Connecting the speakers to the unit
12 Antenna Connection
13 Optional Equipment Connection
13 – USB Connection
13 – PORT. IN Connection
3 Operating
14 Basic Operations
14 – CD/USB Operations
14 – Selecting a folder
15 Other Operations
15 – Programmed Playback
15 – Displaying file information (ID3 TAG)
15 – Turn off the sound temporarily
15 – Setting the BASS and TREBLE
16 Radio Operations
16 – Listening to the radio
16 – Presetting the Radio Stations
16 – Improving poor FM reception
16 – Deleting all the saved stations
17 – Seeing information about a Radio
station
17 – Using the Auto Station Programme
Memory(ASPM)
18 – Deleting all saved RDS stations
18 Setting the Clock
19 – Setting the alarm
19 – Sleep Timer Setting
19 – Dimmer
20 Listening to music from your external
device
20 Auto Power Down
4 Troubleshooting
21 Troubleshooting
5 Appendix
22 Specifications
23 Maintenance
23 – Handling the Unit
23 – Notes on Discs
CM2030-DU_AESPLLB_ENG.indd 5 2013-06-19  3:08:50
http:\\www.direcTutor.com

Getting Started 7
Getting Started
1
Compatible USB Devices
yMP3 Player : Flash type MP3 player.
yUSB Flash Drive :
Devices that support USB 2.0 or USB 1.1.
yThe USB function of this unit does not support
all USB devices.
USB device requirement
yDevices which require additional program
installation when you have connected it to a
computer, are not supported.
yDo not extract the USB device while in operation.
yFor a large capacity USB, it may take longer than
a few minute to be searched.
yTo prevent data loss, back up all data.
yIf you use a USB extension cable or USB hub, the
USB device is not recognized.
yUsing NTFS le system is not supported.
(Only FAT(16/32) le system is supported.)
yThis unit is not supported when the total
number of les is 1 000 or more.
yExternal HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yUSB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
ySome USB may not work with this unit.
CM2030-DU_AESPLLB_ENG.indd 7 2013-06-19  3:08:51
http:\\www.direcTutor.com

Getting Started10
Getting Started
1
a 1/!(Power ON/OFF)
Switches the unit ON or OFF.
LED Indicator
LED lights up in stand by mode.
bDisplay window
cDisc tray
Load a disc.
d Y/U (Skip/Search)
- Searches backward or forward.
- Skips to the previous/next chapter/track/le.
- Tunes in the desired radio station.
eUSB Port
Plays the audio les by connecting the USB
device.
fPORT. IN
Listens to music from your portable device.
gTREBLE/BASS
Listens to the music with the desired sound
eect by adjusting treble and bass.
hVOLUME-/+
Adjusts volume of speaker.
i T
Starts or pauses playback.
I
Stops playback.
PRE(+)/PRE(-)
Selects preset numbers.
j FUNC.
Selects the function and input source.
k R(Open/Close)
Opens and closes the disc tray.
R
Remote sensor
Front Panel
OP
OP
CM2030-DU_AESPLLB_ENG.indd 10 2013-06-19  3:08:54
http:\\www.direcTutor.com

Operating14
Operating
3
Basic Operations
CD/USB Operations
1. Insert the disc by pressing BOPEN/CLOSE on
the remote control or Ron the unit.
Or connect the USB device to the USB port.
2. Select the CD or USB function by pressing
CD or USB on the remote control or FUNC. on
the unit.
3. Select a track/file you want to play by pressing
C/V on the remote control or Y/U
on the unit.
To Do this
Stop Press Zon the remote control or
on the unit.
Playback Press d/Mon the remote control
or Ton the unit.
Pause During playback, press d/Mon the
remote control or T on the unit.
Skip to the
next/previous
track/le
During playback, press Von the
remote control or Uon the unit
to go to the next track/le.
Playing less than 2 seconds, press
Con the remote control or Y
on the unit to go to the previous
track/le.
Playing after 3 seconds, press C
on the remote control or Yon
the unit to go to the beginning of
the track/le.
Search for
a section
within a track
Press and hold c/von the
remote control or Y/U on
the unit during playback and
release it at the point you want to
listen to.
Play
repeatedly or
randomly
Press REPEAT/MENU on the
remote control repeatedly, the
display change in the following
order.
REPEAT1 -> REPEAT GROUP(Only
MP3) -> REPEAT -> RAND.
(RANDOM) -> OFF
yIf you playback scratched disc,youshould
have experience some noise and fail to read
disc.
yThe DTS is not supported.
, Note
Selecting a folder
1. Press /on the remote control repeatedly
until a desired folder appears.
2. Press
d/Mon the remote control or
Ton the unit to play it. The first file of folder
will play.
yUSB and CD Folders/Files are recognized as
below.
*ROOT
File_01
: File
: Directory
File_02
File_03
File_04
File_05
File_06
File_07
File_08
File_09
File_10
yFiles and folders will be presented in order
recorded and may be presented dierently
according to the record circumstances.
yFolders will be presented as the following
order;
FAT(USB) : FILE_01 -> FILE_02 -> FILE_03 ->
FILE_04 -> FILE_05 -> FILE_06 -> FILE_07
-> FILE_08 -> FILE_09 -> FILE_10
CD : FILE_01 -> FILE_02 -> FILE_03 ->
FILE_04 -> FILE_05 -> FILE_08 -> FILE_09
-> FILE_06 -> FILE_07 -> FILE_10
y*ROOT : the rst screen you can see when a
computer recognize the USB is “ROOT”
, Note
CM2030-DU_AESPLLB_ENG.indd 14 2013-06-19  3:08:57
http:\\www.direcTutor.com

Operating 15
Operating
3
Other Operations
Programmed Playback
The program function enables you to store your
favorite les from any disc or USB device.
A program can contain 20 tracks/les.
1. Insert a CD or a USB and wait for it to be
ordered.
2. Press PROGRAM on the remote control in stop
status.
3. Press
C/V on the remote control or
Y/U on the unit to select a track/file.
4. Press PROGRAM on the remote control again
to save and select a next track/file.
5. Press
d/Mon the remote control or Ton the
unit to play the programmed music tracks/files.
6. To clear your selection, press Zon the remote
control or Ion the unit twice.
The programs are also cleared when the disc
or USB device is removed, the unit is powered
o or the function is switched to others.
, Note
Displaying file information
(ID3 TAG)
While playing an MP3 le containing le
information, you can display the information by
pressing DISPLAY.
Turn off the sound temporarily
Press @MUTE on the remote control to mute
your sound.
You can mute your sound, for example, to answer
the telephone,“MUTE” will appear and blink in the
display window.
To cancel it, press @MUTE again or change the
volume level.
Setting the BASS and TREBLE
You can listen to music with the bass and treble
eect by using the BASS and TREBLE.
Remote Control : Press BASS/TREBLE.Then “BASS/
TREB” is displayed. Press VOL+/- to select the sound
level you want.
Unit : Turn BASS/TREBLE right and left. Then “BASS/
TREB” is displayed.
On Display Description
BASS Reinforce bass sound eect.
TREB(TREBLE) Reinforce treble sound eect.
CM2030-DU_AESPLLB_ENG.indd 15 2013-06-19  3:08:57
http:\\www.direcTutor.com

Operating16
Operating
3
Radio Operations
Listening to the radio
1. Press TUNER/ST./MO. on the remote control
or FUNC. on the unit until FM appears in the
display window.
The last received station is tuned in.
2. Auto tuning : Press TUN. -/+ on the remote
control or Y/U on the unit for about 2
seconds until the frequency indication starts
changing, then release. Scanning stops when
the unit tunes in a station.
Manual tuning: Press TUN. -/+ on the remote
control or Y/U on the unit repeatedly.
3. Adjust the volume by using VOL+/- on the
remote control or VOLUME-/+ on the unit
repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press TUNER/ST./MO. on the remote control
or FUNC. on the unit until FM appears in the
display window.
2. Select the desired frequency by pressing
TUN. -/+ on the remote control or Y/U
on the unit.
3. Press PROGRAM. A preset number will blink in
the display window.
4. Press / on the remote control or PRE(+)/
PRE(-) on the unit to select the preset number
you want.
5. Press PROGRAM. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press / on the
remote control or PRE(+)/PRE(-) on the unit.
Improving poor FM reception
Press TUNER/ST./MO. on the remote control. This
will change the tuner from stereo to mono. Then
the reception will be better than before.
Deleting all the saved stations
1. Press and hold PROGRAM for two seconds.
“ERASE” will blink in the display window.
2. Press PROGRAM to erase all saved radio
stations.
CM2030-DU_AESPLLB_ENG.indd 16 2013-06-19  3:08:57
http:\\www.direcTutor.com

Operating 17
Operating
3
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about
the radio station being listened to. Press RDS
repeatedly to cycle through the various data types. :
PS (Programme Service Name)
The name of the channel will appear in
the display
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT (Time controlled by the channel)
This shows the time and date as
broadcast by the station.
You can search the radio stations by programme
type by pressing RDS. The display will show the last
PTY in use. Press PTY/ASPM one or more times to
select your preferred programme type. Press and
hold TUN. -/+. The tuner will search automatically.
When a station is found, the search will stop.
Using the Auto Station
Programme Memory(ASPM)
This function lets you automatically search and
store 50 stations.
1. Press TUNER/ST./MO. on the remote control
or FUNC. on the unit until FM appears in the
display window.
2. Press and hold PTY/ASPM for at least 3 seconds.
After "ASPM" will blink in the display window,
scanning will start. (87.50 - 108.00 MHz)
To stop scanning, press PTY/ASPM again.
3. When an RDS station is found, the station will
be stored in memory.
4. After scanning, the number of stations stored in
memory will be displayed, and then“END”will
appear.
5. Although you preset stations for FM manually,
a preset number for a RDS station will be saved
successively.
6. To listen a stored station, press / .
CM2030-DU_AESPLLB_ENG.indd 17 2013-06-19  3:08:57
http:\\www.direcTutor.com

Operating18
Operating
3
Deleting all saved RDS
stations
1. Press and hold PROGRAM for two seconds.
“ERASE” will blink in the display window.
2. Press PROGRAM to erase all saved radio
stations.
yIf the same station is broadcast on different
frequencies, the strongest frequency will be
stored in memory.
yIf 50 stations have already been stored in
memory, the scan will be aborted.
yIf no station have been stored in memory,
“0 MEM”and“END” will appear for about 4
seconds.
yIf the RDS signals are very weak, station
may not be stored in memory.
yIf 50 stations is already stored, ASPM will not
work. So delete all these stations to search
and store new RDS stations in memory.
, Note
Setting the Clock
1. Turn the unit on or off.
2. Press and hold CLOCK for at least 2 seconds.
3. Choose time mode by pressing C/V.
- 12 HOUR (for an AM and PM display)
or 24 HOUR (for a 24 hour display)
4. Press CLOCK to confirm your selection.
5. Select the hours by pressing C/V.
6. Press CLOCK.
7. Select the minutes by pressing C/V.
8. Press CLOCK.
9. If you want to reset the clock, repeat steps 2-8.
CM2030-DU_AESPLLB_ENG.indd 18 2013-06-19  3:08:57
http:\\www.direcTutor.com

Operating 19
Operating
3
Setting the alarm
You can use the unit as an alarm clock.
You have to set the clock before setting the alarm.
1. Turn the unit on.
2. Press and hold TIMER. Alarm sound sources will
blink.
3. Select the one you want and press TIMER to
save.
(TUNER/CD/USB)
4. “ON TIME” will be displayed. This is your desired
time to the unit turns on.
Press C/Vto change the hours and
minutes and press TIMER to save.
5. The “OFF TIME” will be displayed. This is your
desired time to the unit turns off.
Press C/Vto change the hours and
minutes and press TIMER to save.
6. Press
C/Vto change the volume and
press TIMER to save.
7. You can check the setting status.
8. If you want to reset the alarm, repeat steps 2-6.
yIf you have activated the alarm before, you
can check alarm information by pressing
TIMER in stand by mode.
yIn power-on mode, press TIMER to
deactivate alarm
yIn power-on mode, press TIMER to activate
alarm. Then you can see alarm information
and alarm icon .
, Note
Sleep Timer Setting
Press SLEEP repeatedly and ENTER to select delay
time between 15 and 90 minutes. After the delay
time, the unit will be turned o. (You can see the
following order, 15 ->30 -> 45 -> 60 -> 90->OFF)
To cancel the sleep function, press SLEEP
repeatedly until “SLEEPOFF” appears.
yYou can check the remaining time before
the unit is turned o.
yPress SLEEP. The remaining time appears in
the display window.
, Note
Dimmer
Press DIMMER once. The display window will be
darkened by half. To cancel it, press DIMMER once
more.
CM2030-DU_AESPLLB_ENG.indd 19 2013-06-19  3:08:57
http:\\www.direcTutor.com

Operating20
Operating
3
Listening to music
from your external
device
The unit can be used to play the music from many
types of external device.
(Refer to the page 13)
1. Connect the external device to the PORT. IN
connector of the unit.
2. Turn the power on by pressing 1/!(Power ON/
OFF).
3. Select the PORTABLE function by pressing
FUNC. on the unit.
4. Turn the external device and start playing
music.
Auto Power Down
This unit will be o itself to save electronic
consumption in the case main unit is not
connected to external device and is not used for 25
minutes. So does this unit after 6 hours since Main
unit has been connected to other device using
analog input.
CM2030-DU_AESPLLB_ENG.indd 20 2013-06-19  3:08:57
http:\\www.direcTutor.com