LG MUSIC FLOW SJ8 Specification sheet

SIMPLE MANUAL
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com and then download
Owner’s Manual. Some of the content in this manual may differ from your unit.
MODEL
SJ8
*MFL70269610*
SJ8
SMART Hi-Fi
AUDIO
Wireless Multi-room Sound Bar
ΕΛΛΗΝΙΚΑ
SUOMI
NORSK
DANSK
SVENSKA
PORTUGUÊS
ENGLISH ESPAÑOLITALIANO
NEDERLANDS
FRANÇAIS
DEUTSCH
www.lg.com
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
SJ8.DWEULLZ_SIMPLE_ENG_MFL70269610.indd 1 2017-07-13 �� 5:17:24

Front Panel
Rear Panel
DC IN ·····················Connect to AC Adapter.
USB (Service only) ······S/W download connector.
LAN·····························Connect to router.
OPTICAL IN ···········Connect to an optical device
HDMI IN ········Connect to device with HDMI OUT.
HDMI OUT (TV ARC) ·············Connect to a TV.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
aConnect the power cord of the sound bar and the
wireless subwoofer to the outlet.
bTurn on the sound bar. :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's green
LED turns on.
Subwoofer Connection Manually
If the subwoofer does not make sound, try to connect
manually.
aPress Pairing button on the rear of the wireless
subwoofer.
• The green LED on the rear of wireless
subwoofer blinks quickly.
bTurn on the sound bar.
cPairing is completed.
• The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m to prevent wireless
interference.
> 1 m
The buttons are located on the rear.
LED indicator
1·······································Standby
F································Selects function
-/+ ·······························Adjusts volume
····················Connects wireless network.
···· Adds the additional Music Flow product to
your network. (In case that one or more Music Flow
product is connected.)
LED indicator: Shows connection status.
• White (Blinking): Waiting for network connection
• White (Staying on): Network connection is
completed.
• White (Dimmed): Standby mode with network
connection.
• Green(Stayingon):Therstgroupwasset.
• Red (Staying on): Standby mode without network
connection.
LAN
SJ8.DWEULLZ_SIMPLE_ENG_MFL70269610.indd 2 2017-07-13 �� 5:17:24

a
b
c
d
a Check network condition. A router connected to
network should be installed.
b Connect your smart device to your home network.
c Connect the sound bar to the power supply.
d Connect the media server to your home network in
order to enjoy music.
All devices should be connected to same router.
• Download LG Music Flow Application
Download “Music Flow Player” on the App Store or
Google Play Store.
• Launch Music Flow Player App
Follow the steps for wired or wireless connection
displayed on the screen.
Network ConnectionTV Connection
Connect the sound bar and TV using Optical ( ) or
HDMI ARC ( ).
Optical Connection
aConnect the sound bar to the TV using
Optical cable.
bSet up [External Speaker (Optical)] on your
TV setting menu.
TV
HDMI(ARC) Connection
aConnect the sound bar to the TV using HDMI
cable.
bSet up [External Speaker (HDMI ARC)] on
your TV setting menu.
TV
• HDMI connection is unavailable if your TV
does not support HDMI ARC.
• If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal is a
high priority.
Additional Device Connection
aConnect to the external device like as follow.
(Set-top Box,
Player etc.)
OR
bSet the input source by pressing Fon the
remote control or unit repeatedly.
SJ8.DWEULLZ_SIMPLE_ENG_MFL70269610.indd 3 2017-07-13 �� 5:17:25

Remote control
Replacement of battery
SOUND EFFECT: Selects a sound effect mode.
F: Selects the function and the input source.
8: Turns down the volume at night.
: Adjusts sound level of Treble, Bass and Sub-woofer.
INFO: Displays the input source information.
AV SYNC: Synchronizes the audio and video.
SLEEP: Setsthesystemtoturnoffautomaticallyataspecied
time.
AUTO VOL:
Adjusts too loud or low output volume level
appropriately.
AUTO POWER: Automatically turns on by an input source.
Additional Information
Specication
Power
consumption
Refer to the main label.
Networked standby : 5.0 W
(If all network ports are activated.)
AC adapter
yModel : DA-38A25
yManufacturer : Asian Power Devices Inc.
yInput : 100 - 240 V ~ 50 - 60 Hz
yOutput : 25 V 01.52 A
Dimensions
(W x H x D)
Approx. 1220 mm x 38 mm x 105 mm
Amplier
(Total RMS
Output power)
300 W RMS
Designandspecicationsaresubjecttochangewithoutnotice.
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-
ROM for a charge covering the cost of performing such distribution
(such as the cost of media, shipping and handling) upon email
request to opensour[email protected]. This offer is valid for three (3)
years from the date on which you purchased the product.
How to disconnect the wireless network
connection or the wireless device
Press and hold the “ (Add)” button until you hear the beep
sound twice.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type
WIRELESS MULTI-ROOM SOUND BAR is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
The use of the 5150 – 5350 MHz band is restricted to indoor use
only. This restriction exists in the countries Belgium (BE), Bulgaria
(BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia
(EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR),
Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU),
Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland
(PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),
Finland (FI), Sweden (SE), United Kingdom (UK), Switzerland (CH),
Iceland (IS), Liechtenstein (LI) and Norway(NO).
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
Frequency range Output power (Max.)
2402 to 2480 MHz 10 dBm
2412 to 2472 MHz 19 dBm
5180 to 5240 MHz 20 dBm
5730 to 5821 MHz 13 dBm
SJ8.DWEULLZ_SIMPLE_ENG_MFL70269610.indd 4 2017-07-13 �� 5:17:26