LG 60PM670T User manual

User Guide
This is a 「User Guide」 installed on the TV.
The contents of this guide are subject to change without prior notice for quality
improvement.

GP4
eng
 

Displays information on current programme and / or current time, etc.
✎ Image shown may differ from your TV.
Programme name or external
device name
Detail information on programme
(for digital broadcast)
Current time
14:00 16:30
Sat, 1 Jan 12:02
Prev./Next Pr. Change Schedule

GP4
eng
❐To set favourite programmes
HOME ➾ Settings ➙ SETUP ➙ Programme Edit
1 Move to the desired programme and press Wheel(OK) button. Programme
is selected.
2 Press Set as Favourite.
3 Select the desired Favourite Pr. Group.
4 Select OK. Favourite is set.
❐To use Favourite
HOME ➾ Pr. List
Programme list will appear. Selects the desired preset favourite programme
from Favourite List A to D.

GP4
eng
HOME ➾ Programme Guide
[In Digital Mode Only]
Obtains information about programmes and airing times. Obtains programme in-
formation and schedules viewing / recording.
Press Wheel(OK) button after moving to a
programme of your choice to view or view /
record.
Makes schedule reservation by selecting date / time /
programme. Makes repeat schedule reservation.
[Image shown may differ from your TV.]
After viewing the schedule list, makes
revisions or deletions.
-24H +24H Select schedule
by date Schedule List Favourite Pr. Group
Today 10 Aug. 2011 7:00 1/2 page
FAV
Programme Guide
ALL

GP2
eng
❐Automatically Setting Up Programme
HOME ➾ Settings ➙ SETUP ➙Auto Tuning
Automatically tunes the programmes.
1 Select Country where the TV is used. Programme settings change depending
on the country you choose.
2 Initiate Auto Tuning.
3 Select Input Source of your choice.
4 Set Auto Tuning following screen instructions.
✎If Input Source is not connected properly, programme registration may not
work.
✎Auto Tuning only finds programmes that are currently broadcasting.
✎If Lock System is turned on, a pop-up window will appear asking for
password.

GP2
eng
❌Cable DTV Setting option
When searching for programmes using FULL setting it can take a long time.
The following values are needed in order to search all available programmes
quickly and correctly. The commonly used values are provided as “default”.
Frequency Enter a user-defined frequency.
Symbol rate Speed at which a device such as modem sends symbols to
a programme.
Modulation Loading of audio or video signals onto carrier.
Network ID Unique identifier allocated for each user.
Start Frequency Enter a user-defined start frequency range.
End Frequency Enter a user-defined end frequency range.

GP2
eng
❐Cable DTV Setting
HOME ➾ Settings ➙ SETUP ➙ Cable DTV Setting
[In Cable mode only]
Service Operator
Set Service Operator.
When changing Service Operator, the existing saved
programmes are deleted and Auto Tuning runs.
Channel Auto
Update
• On :You can update information for all the programmes
that can be updated, including the programme currently
being watched.
• Off :You can only update information for the programme
currently being watched.

GP2
eng
✎The range that a user can select from the Service Operator menu differs
depending on number of Service Operator supported by each country.
✎If number of supported Service Operator for each country is 1, corresponding
function becomes inactive.
✎You can not select the Cable DTV Setting when the service operator is set to
“Ziggo”.

GP2
eng
❐To use Manual Tuning
HOME ➾ Settings ➙ SETUP ➙ Manual Tuning
Adjusts programmes manually and saves the results.
For digital broadcasting, signal strength and signal quality can be checked.

GP2
eng
❐To edit programmes
HOME ➾ Settings ➙ SETUP ➙ Programme Edit
Edits the saved programmes.
Set as favourite programme, block/unblock programme, skip programme etc. of
the selected programme.

GP4
eng
Wheel(OK) ➾ (Screen Remote Control)
(or press the TEXT button.)
[depending on the country]
Teletext is a free service provided by the TV station that offers text-based
information about TV programmes, news and weather.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT
systems.
Colour button To select the preceding or following page.
Number button Enters the page number to move to.
ꔵTo select the preceding or following page.

GP4
eng
❐Special Teletext Function
Wheel(OK) ➾ (Screen Remote Control)
(or press the T. OPT button.)
Select the Text Option menu.
ꔻIndex Select each index page.
ꔾTime When viewing a TV programme, select this menu to display the
time at the top right hand corner of the screen.
ꕀHold Stops the automatic page change which will occur if a teletext
page consists of 2 or more sub pages.

GP4
eng
ꔽReveal Select this menu to display concealed information, such as
solutions to riddles or puzzles.
ꔼUpdate Displays the TV picture on the screen while waiting for a new
teletext page.
Language [In Digital Mode Only]
Sets Teletext language.

GP4
eng
Wheel(OK) ➾ (Screen Remote Control)
(or press the TEXT button.)
[In UK/Ireland only]
The TV gives you access to digital teletext which gives much better text,
graphics etc. than older analogue teletext. This digital teletext can access
special digital teletext services and specific services which broadcast digital
teletext.

GP4
eng
❌Teletext within digital service
1 Press the numeric or ꔵbutton to select a certain service which broadcasts
digital teletext.
2 Follow the indications on digital teletext and move onto the next step by
pressing Wheel(OK), TEXT, Navigation, Red, Green, Yellow, Blue or NUMBER
buttons etc..
3 Press the number or ꔵbutton to use a different digital teletext service.

GP4
eng
❌Teletext in digital service
1 Press the numeric or ꔵbutton to select a certain service which broadcasts
digital teletext.
2 Press the TEXT or colour button to switch on teletext.
3 Follow the indications on digital teletext and move onto the next step by
pressing Wheel(OK), Navigation, Red, Green, Yellow, Blue or NUMBER buttons
etc..
4 Press the TEXT or colour button to switch off digital teletext and return to TV
viewing.

GP4
eng
HOME ➾ Settings ➙ OPTION ➙ Data Service
[Depending on country]
This function allows users to choose between MHEG (Digital Teletext) and Teletext
if both exist at the same time.
If only one of them exists, either MHEG or Teletext is enabled regardless of
which option you selected.

GP4
eng
HOME ➾ Settings ➙ SETUP ➙ CI Information
• Thisfunctionenablesyoutowatchsomeencryptedservices(pay
services).
• IfyouremovetheCIModule,youcannotwatchpayservices.
• CI(CommonInterface)functionsmaynotbepossibledependinguponthe
countrybroadcastingcircumstances.
• WhenthemoduleisinsertedintotheCIslot,youcanaccessthemodule
menu.
• Topurchaseamoduleandsmartcard,contactyourdealer.

GP4
eng
• WhentheTVisturnedonafterinsertingaCIModule,youmaynothaveany
soundoutput.TheSmartCardmaynotbecompatiblewiththeCImodule.
• WhenusingaCAM(ConditionalAccessModule),pleasemakesureit
meetsfullytherequirementsofeitherDVB-CIorCIplus.
• AnabnormalprocessofCAM(ConditionalAccessModule)maycauseabad
picture.

GP4
eng
HOME ➾ Settings ➙ PICTURE ➙ Aspect Ratio
Selects the screen aspect ratio.
16:9 Resizes images to fit the screen width.
Just Scan
Displays video images in the original size without removing parts
of the edge of the image.
✎ In DTV/HDMI/Component (over 720p) mode, Just Scan is
available.
Original When your TV receives a wide screen signal it will automatically
change to the picture format broadcasted.