LG WD-16331FDK User manual

P/No.: MFL37746450
For U.K. Customer
CUSTOMER SERVICES Tel. : 0870 - 873 - LGLG(5454)
Fax. : 0870 - 872 - 7337
LGEUK SERVICE WEB-SITE : http://uk.lge.com

Washing Machine
OWNER’S MANUAL
WD(M)-16331(6)FDK
WD(M)-14331(6)FDK
WD(M)-12331(6)FDK
Thank you for buying a
LG Fully Au oma ic Washing machine.
Please read your owner's manual carefully, i provides
ins ruc ions on safe ins alla ion, use and main enance.
Re ain i for fu ure reference.
Record he model and serial numbers of your washing machine.

2
roduct Features
P
ontents
C
Warnings....................................................................................3
Specifica ions.............................................................................4
Ins alla ion..................................................................................5
Care before washing................................................................11
Adding de ergen .....................................................................12
Func ion ...................................................................................14
How o use washer ..................................................................15
Main enance ............................................................................22
Troubleshoo ing guide .............................................................26
Terms of Warran y ...................................................................29
■ Jumbo drum
LG’s jumbo drum can wash abou 40% more load han conven ional washing
machines. A bigger drum improves he wash performance.
■ More economical by Intelligent Wash System
In elligen Wash Sys em de ec s he amoun of load and wa er empera ure, and
hen de ermines he op imum wa er level and washing ime o minimize energy and
wa er consump ion.
■ Child-Lock
The child-lock sys em is o be used for preven ing children from pressing any
bu on o change he program during opera ion.
■ Low noise speed control system
By sensing he amoun of load and balance, i evenly dis ribu es load o minimize
he spinning noise level.
■ Direct Drive System
The advanced Brushless DC mo or ro a es he drum direc ly wi hou bel and pulley.
■ Water circulation
Spray de ergen solu ion and wa er on o he load over and over. Clo hes are
soaked more quickly and horoughly during wash cycle. The de ergen suds can be
removed more easily by he wa er shower during rinse cycle. The wa er circula ion
sys em uses bo h wa er and de ergen more efficien ly.
추가선택, 예약,

3
arnings
W
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
!
READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE
WARNING!
❊ Do not push down the door excessively, when washer door open.
This could topple over the washer.
• Before ins alla ion, check ex erior damages. If i has,
do no ins all.
• Do no ins all or s ore he washer where i will
be exposed o he wea her.
• Do no amper wi h con rols.
• Do no repair or replace any par of he washer
or a emp any servicing unless specifically
recommended in he user-main enance ins ruc ions
or published user-repair ins ruc ions ha you
unders and and have he skills o carry ou .
• Keep he area undernea h and around your
appliances free of combus ible ma erials such as
lin , paper, rags, chemicals, e c.
• Close supervision is necessary if his appliance is
used by or near children or infirm persons.
Do no allow hem o play on, wi h, or inside his
or any o her appliance.
• Keep washer away from fire.
• Do no leave he washer door open.
An open door could en ice children o hang on he
door or crawl inside he washer.
• Never reach in o washer while i is moving. Wai
un il he drum has comple ely s opped.
• The laundry process can reduce he flame re ardan
of fabrics.
• To avoid such a resul , carefully follow he garmen
manufac urer’s wash and care ins ruc ions.
• Do no wash or dry ar icles ha have been cleaned
in, washed in, soaked in, or spo ed wi h
combus ible or explosive subs ances (such as wax,
oil, pain , gasoline, degreasers, dry-cleaning
solven s, kerosene, e c.) which may igni e or
explode. Oil may remain in he ub af er a whole
cycle resul ing in fire during drying. So, do no load
oiled clo hes.
• Do no slam he washer door closed or ry o force
he door open when locked. This could resul in
damage o he washer.
• When he machine runs high empera ure, he fron
door may be very ho . Don’ ouch i .
• To minimize he possibili y of elec ric shock, unplug
his appliance from he power supply or disconnec
he washer a he household dis ribu ion panel by
removing he fuse or swi ching off he circui breaker
before a emp ing any main enance or cleaning.
• When unplugging power cord, do no pull ou by
grasping he cord. O herwise, he power cord may
be damaged.
• Never a emp o opera e his appliance if i is
damaged, malfunc ioning, par ially disassembled, or
has missing or broken par s, including a damaged
cord or plug.
• Before discarding an old machine unplug i . Render
he plug useless. Cu off he cable direc ly behind
he appliance o preven misuse.
• When a produc was under wa er, Please call
service cen er. The risk of elec ric shock and fire.
GROUNDING INSTRUCTIONS
This appliance mus be grounded. In he even of malfunc ion or breakdown, grounding will reduce he risk of elec ric shock by providing a pa h
of leas resis ance for elec ric curren . This appliance is equipped wi h a cord having an equipmen -grounding conduc or and grounding plug.
The plug mus be plugged in o an appropria e ou le ha is properly ins alled and grounded in accordance wi h all local codes and ordinance.
• Do no use an adap er or o herwise defea he grounding plug.
• If you don’ have he proper ou le , consul an elec rician.
IMPORTANT SAFETY INSTRUCTIONS
WARNING :To reduce he risk of fire, elec ric shock, or injury o persons when using
he washer, follow basic precau ions, including he following:
SAVE THESE INSTRUCTIONS
WARNING : Improper connec ion of he equipmen -grounding conduc or can resul in risk of elec ric shock. Check wi h
a qualified elec rician or serviceman if you are in doub as o whe her he appliance is properly grounded. Do no modify
he plug provided wi h he appliance - if i does no fi he ou le , have a proper ou le ins alled by a qualified elec rician.

Spanner
■ Accessories
4
pecifications
S
Name : Fron loading washing machine
Power supply : 220-240 V~, 50 Hz
Size : 600mm(W) x 600mm(D) x 850mm(H)
Weigh : 65 kg
Wash capaci y : 8 kg
Max.Wa : 2100 W
Spin speed :
No spin/400/600/800/1000/1200 [WD(M)-12331(6)FDK]
No spin/400/600/800/1000/1200/1400 [WD(M)-14331(6)FDK]
No spin/400/600/800/1000/1200/1400/1600 [WD(M)-16331(6)FDK]
Wa er consump ion : 56ℓ(7ℓ/ kg)
Permissible wa er pressure : 0.3-10 kgf/cm
2
(30-1000 kPa)
❋The appearance and specifica ions may be varied wi hou no ice o raise he uni s quali y.

5
nstallation
I
1. To preven in ernal damage during
ranspor , he special 4 bol s are
locked. Before opera ing he washer,
remove
he bol s along wi h he rubber bungs.
• If hey are no removed, i may cause
heavy vibra ion, noise and malfunc ion.
3. Take ou he 4 bol s along wi h he
rubber bungs by sligh ly wis ing he
bung. Keep he 4 bol s and he
spanner for fu ure use.
• Whenever he appliance is ranspor ed,
he ransi bol s mus be refi ed.
The appliance is fi ed wi h ransi bol s o preven in ernal damage during ranspor .
• Packing and all transit bolts must
be removed before using the
washer.
󳢹When unpacking the base, be
sure to remove the additional
packing support in the middle
of the base packing.
2. Unscrew he 4 bol s wi h
he spanner supplied.
4. Close he holes wi h he caps supplied.
 Transit bolts
Install or store where it will not be exposed to temperatures below freezing or exposed to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other
vermin, pay particular attention to keeping the appliance and its surroundings in clean
condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the
appliance guarantee.
 Removing transit bolts
Base Packing
Washer
Packing Suppor
(Packing suppor may no
be used depending on
models.)

6
nstallation
I
Level floor :
Allowable slope under en ire washer is 1˚
Power outlet :
Mus be wi hin 1.5 me ers of ei her side of loca ion of
washer. Do no overload he ou le wi h more han one
appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear / 2cm: righ & lef side)
Do no place or s ore laundry produc s on op of washer a
any imes.
They can damage he finish or con rols.
 Installation place requirement
Laundry
Tub
Washer
approx.
2cm
Drain Hose
 Positioning
Ins all he washer on a fla hard floor.
Make sure ha air circula ion around he washer is no impeded by carpe s,rug e c.
• Never ry o correc any unevenness in he floor wi h pieces of wood, cardboard or similar ma erials
under he washer.
• If i is impossible o avoid posi ioning he washer nex o a gas cooker or coal burning s ove,an
insula ing(85x60cm) covered wi h aluminum foil on he side facing he cooker or s ove,mus be
inser ed be ween he wo appliance.
• The washer mus no be ins alled in rooms where he empera ure can drop below 0°C.
• Please ensure ha when he washer is ins alled, i is easily accessible for he engineer in he even of
a breakdown.
• Wi h he washer ins alled adjus all four fee using he ransi bol spanner provided ensuring he
appliance is s able, and a clearance of approxima ely 20mm is lef be ween he op of he washer and
he underside of he work- op.
 BS Plug Safety Details (For U.K. User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This appliance mus be ear hed
As he colours of he wires in he mains lead of his appara us may no correspond wi h he coloured markings
iden ifying he erminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow mus be connec ed o he erminal in he plug which is marked wi h he
le er E or by he ear h symbol or coloured Green or Green and Yellow.
The wire which is coloured Blue mus be connec ed o he erminal which is marked wi h he le er N or coloured Black.
The wire which is coloured Brown mus be connec ed o he erminal which is marked wi h he le er L or coloured Red.
If a 13 amp (BS 1363) plug is used, fi a 13 amp BS 1362 fuse.
Green and Yellow(Earth)
Brown(Live)
Blue(Neutral) Fuse
Cord
grip
E
L
N

7
nstallation
I
Ho wa er ap
Cold Ho (op ion)
Cold
wa er
ap
▶Water supply pressure must be between 30kPa and 1000kPa (0.3~10kgf/cm2)
▶Don’t strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 1000kPa, a decompression device
should be installed.
• Two rubber seals are supplied wi h he wa er inle hoses hese are in
order o preven wa er leaks.
• Check wa er igh ness of washing machine connec ions by urning he
ap comple ely on.
• Periodically check he condi ion of he hose and replace he hose if
necessary.
• Make sure ha here is no kink on he hose and ha i is no crushed.
▶When your washer has two valves.
• The Inle hose which has red connec or is for he ho wa er ap.
• If he washer has wo valves, he energy is saved by using ho valve.
 Washing Machine is to be connected to the water mains using new hose-sets and that old
hose-sets should not be used.
 Connecting water supply hose
1. Do no use an ex ension cord or double adap er.
2. If he supply cord is damaged, i mus be replaced by he manufac urer or i s service agen s or
similarly qualified person in order o avoid a hazard.
3. Always unplug he machine and urn off he wa er supply af er use.
4. Connec he machine o an ear hed socke in accordance wi h curren wiring regula ions.
5. The appliance mus be posi ioned so ha he plug is easily accessible.
• Repairs o he washing machine mus only be carried ou qualified personnel. Repairs carried ou by
inexperienced persons may cause injury or serious malfunc ioning. Con ac your local service cen er
• Do no ins all your washing machine in rooms where empera ures below freezing may occur. Frozen hoses
may burs under pressure. The reliabili y of he elec ronic con rol uni may be impaired a empera ures below
freezing poin .
• If he appliance is delivered in he win er mon hs and empera ures are below freezing : S ore he washing
machine a room empera ure for a few hours before pu ing i in o opera ion.
 Electrical connection
CAUTION concerning the Power Cord
Mos appliances recommend hey be placed upon a dedica ed circui ; ha is, a single ou le circui
which powers only ha appliance and has no addi ional ou le s or branch circui s. Check he
specifica ion page of his owner's manual o be cer ain.
Do no overload wall ou le s. Overloaded wall ou le s, loose or damaged wall ou le s, ex ension cords,
frayed power cords, or damaged or cracked wire insula ion are dangerous. Any of hese condi ions
could resul in elec ric shock or fire. Periodically examine he cord of your appliance, and if i s
appearance indica es damage or de eriora ion, unplug i , discon inue use of he appliance, and have
he cord replaced wi h an exac replacemen par by an au horized servicer.
Pro ec he power cord from physical or mechanical abuse, such as being wis ed, kinked, pinched,
closed in a door, or walked upon. Pay par icular a en ion o plugs, wall ou le s, and he poin where
he cord exi s he appliance.
CAUTION
NOTE
After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type
of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the
faucet into the adaptor.

8
nstallation
I
 Normal Tap without thread & screw type inlet hose
 Normal Tap without thread & one touch type inlet hose
1.Unscrew he fixing screw o
a ach he ap.
2.Push he connec or up ill he
rubber packing is in igh con ac
wi h he ap. Then igh en he 4
screws.
3.Push he wa er supply hose
ver ically upwards so ha he
rubber packing wi hin in he
hose can adhere comple ely o
he ap and hen igh en i by
screwing i o he righ .
1.Un igh en he upper connec or
screw.
2.Push he upper connec or up ill
he rubber packing is in igh
con ac wi h he ap. Then
igh en he 4 screws.
3. Connec he wa er supply hose
o he middle connec or,
pushing he pla e down.
• Make sure ha here are no
kinks in he hose and ha i is
no crushed.
• Make sure ha he rubber seal
is inside he hose connec or.
Upper
Connec or Rubber
packing
Middle
connec or
Fixing screw
Guide pla e
Connec or
Rubber seal
Hose connec or
Used the horizontal tap
Horizon al ap
Ex ension ap
Square ap
Rubber packing
Upper
Connec or
Middle
connec or
Pla e
Upper
Connec or
Wa er supply
hose
• In case he diame er of he ap is
large remove he guide pla e.
• Turn he middle connec or no
o have wa er leaked.
• To separa e he wa er supply
hose from he middle connec or
shu off he ap. Then pull he
inle hose down, pushing he
pla e down.

9
nstallation
I
 Installation of drain hose
• The drain hose should no be placed higher
han 100 cm above he floor. Wa er in he
washer does no drain or drains slowly.
• Proper securing of he drain hose will
pro ec he floor from damage due o wa er
leakage.
• When he drain hose is oo long, do no
force back in o he washer. This will cause
abnormal noise.
• When ins alling he drain hose sink,
secure i igh ly wi h a s ring.
• Proper securing of he drain hose will
pro ec he floor from damage due o
wa er leakage.
This equipmen is no designed for mari ime use or for use mobile ins alla ions such as
caravans, aircraf e c.
Turn off he s opcock if he machine is o be lef for any leng h of ime (e.g. holiday),
especially if here is no floor drain(gully) in he immedia e vicini y.
When disposing of he appliance, cu off he mains cable, and des roy he plug Disable he
door lock o preven young children being rapped inside.
Packaging ma erial (e.g. Films, S yrofoam) can be dangerous for children. There is a risk
of suffoca ion !
Keep all packaging well away from children

1. Adjus ing he washing machine level properly preven s excessive noise
and vibra ion.
Ins all he appliance on a solid and level floor surface, preferably in a
corner of he room.
2. If he floor is uneven, adjus he adjus able fee as required. (do no inser
pieces of wood e c. under he fee )
Make sure ha all four fee are s able and res ing on he floor and hen
check ha he appliance is perfec ly level. (use a spiri level)
※※
After the washer is level, tighten the lock nuts up towards of the base of the
washer. All lock nuts must be tightened.
❊ Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the
machine should not move up and down at all. (Please, check both of two
directions)
If machine rocks when pushing the machine top plate diagonally, adjust the
feet again.
10
nstallation
I
Rubber Cup
NOTE
NOTE
 Level adjustment
 Concrete floors
 Wooden floors (Suspended floors)
• The ins alla ion surface mus be clean, dry and level.
• Ins all washer on a fla hard floor.
 Tile floors (Slippery floors)
• Posi ion each foo on he Tread Ma e and level he machine o sui . (Cu Tread Ma e in o 70x70 mm
sec ions and s ick he pieces on o he dry ile where machine is o be placed.)
※※
Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.
• Wooden floors are par icularly suscep ible o vibra ion.
• To preven vibra ion we recommend you place rubber cups under each foo ,
a leas 15mm hick under he washer, secured o a leas 2 floor beams wi h screws.
• If possible ins all he washer in one of he corners of he room, where he floor is more s able.
※※
Insert the rubber cups to reduce vibration.
※※
You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept.
Important!
• Proper placemen and levelling of he washer ensure long,regular and reliable opera ion.
• The washer mus be absolu ely horizon al and s and firmly in posi ion.
• I mus no “Seesaw” across corners under load.
• The ins alla ion surface mus be clean, free from floor wax and o her lubrican coa ings.
• Do no le he fee of he washer ge we . If fee of he washer ge we , slipping may occur.
Timber or suspended type flooring may contribute to excessive
vibration and unblance errors.
In the case that the washing machine is installed on a raised
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.

11
are before washing
C
1. Care Labels
Look for a care label on your clo hes. This will ell you abou he fabric con en of your garmen and
how i should be washed.
2. Sorting
To ge he bes resul s, Sor clo hes in o loads ha can be washed wi h he same wash cycle.
Wa er empera ure and spin speed and differen fabrics need o be washed in differen ways.
Always sor dark colors from pale colors and whi es. Wash separa ely as dye and lin ransfer can
occur causing discolora ion of whi e e c. If possible, do no wash heavily soiled i ems wi h ligh ly
soiled one.
Soil (Heavy, Normal, Ligh ) Separa e clo hes according o amoun of soil.
Color (Whi e, Ligh s, Darks) Separa e whi e fabrics from colored fabrics.
Lin (Lin producers, Collec ors) Wash lin producers and lin collec ors
separa ely.
3. Caring before loading
 Caring before washing
 Before the first washing
 Combine large and small items in a load. Load large items first. Large items should not be more than half
the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
• Check all pocke s o make sure ha hey
are emp y. I ems such as nails, hair clip,
ma ches, pens, coins and keys can damage
bo h your washer and your clo hes.
• Close zippers, hooks and s rings o
make sure ha hese i ems don’
snag on o her clo hes.
• Pre rea dir and s ains by brushing a li le
de ergen dissolved in wa er on o s ains like
collars and cuffs o help shif dir .
Selec a cycle (COTTON 60°C, add a half load of de ergen ) allow he uni o wash
wi hou clo hing. This will remove residues and wa er from he drum ha may have been lef
during manufac uring.
• Check he folds of he flexible gaske (gray) and
remove any small ar icles,if any.
• Check inside of he drum and remove any lef
i ems in i for nex wash cycle.
• Remove any clo hing or i ems on he flexible
gaske o preven clo hing and he gaske
damages.

12
dding detergent
A
• Main wash only ➔
• Pre Wash + Main Wash ➔
• Do no exceed he maximum fill line.
Close he dispenser drawer slowly.
Overfilling can cause early dispensing
of he fabric sof ener which could s ain
clo hes.
• Do no leave he fabric sof ener in he
de ergen drawer for more han 2 days.
(Fabric sof ener could harden)
• Sof ener will au oma ically be added
during he las rinse cycle.
• Do no open he drawer when wa er is
supplied.
• Solven s(benzene, e c) are no
allowable.
1. The Dispenser Drawer
2. Adding Fabric Softener
 Adding detergent and fabric softener
Do not pour fabric softener
directly on the cloths
NOTE
MAX
max

13
dding detergent
A
• The detergent should be used according to the
instruction of the detergent manufacture.
• If too much detergent is used, too many suds
can occur and this will decrease the washing
result or cause heavy load to the motor.
• Use powder detergent only for the front
loading washer.
❇ If suds occur too much, pleas reduce the
detergent amount.
• De ergen usage may need o be adjus ed
for wa er empera ure, wa er hardness,
size and soil level of he load. For bes
resul s, avoid oversudsing.
4. Water softener
• A wa er sof ener, such as An i limescale
(Clagon) can be used o cu down on he
use of de ergen in ex remely hard wa er
areas. Dispense according o he amoun
specified on he packaging.
Firs add de ergen and hen he wa er
sof ener.
• Use he quan i y of de ergen as for sof
wa er.
❋ Tips
Full load : according to
manufacturer’s recommendation.
Part load : 3/4 of the normal
amount.
Minimum load : 1/2 of full load.
• De ergen is flushed from he dispenser
a he beginning of he cycle.
1) Open he door and Table s in o he
drum.
3. Detergent dosage
5. Using the Tablets
MAX
max
2) Load he laundry in o he drum.
3) Close he door.

14
unction
F
■ Recommended courses according to the laundry types
❋Eco : By selec ing Eco func ion, he wa er empera ure is reduced and washing ime is leng hened.
So you can economize in your consump ion of hea ing energy.
❋Intensive : If he laundry is heavily soiled “In ensive” op ion is effec ive.
❋Program se ing wi h “In ensive” op ion for es in accordance or in conformi y wi h EN60456
and IEC 60456.
❋Rinse+: Used o in roduce an addi ional rinse, which may assis in removing races of de ergen
residue.
❋Pre Wash : If he laundry is heavily soiled, “Pre Wash” course is recommended.
❋Crease Care : If you wan o preven crease, selec Crease Care bu on.
Cotton
Synthetic
Delicate
Wool/Silk
Hand Wash
Quick 30
- Rinse Hold
- In ensive
- Rinse+
- Pre Wash
- Crease Care
Ra ing
Ra ing
Less han
3.5 kg
Less han
3.0 kg
Less han
2.0 kg
Less han
2.0 kg
Less han
2.0 kg
- Rinse Hold
- In ensive
- Rinse+
- Crease Care
- Rinse Hold
- Rinse+
- Crease Care
Firs check if laundry is
machine washable.
(whi e co on, linen owel and
shee s...)
Color fas gamen s
(shir s, nigh dresses,
pajamas...)and ligh ly soiled
whi e co on(underwear...)
Polyamide, Acryic, Polyes er
Delica e laundry easily
damaged
Machine washable woolens
wi h pure new wool or silk only
“Hand Wash” marked
delica e and wool laundry
Colored Laundry which is
ligh ly soiled fas .
95˚C
60˚C
(30˚C, 40˚C,
60˚C-Eco)
40˚C
(60˚C, 30˚C)
30˚C
(40˚C, Cold)
30˚C
(40˚C, Cold)
Cold
(30˚C)
30˚C
Program Fabric Type Proper
Temp. Option Maximum
Load

15
ow to use washer
H
• Press he Power bu on o s ar .
• Press he Start/Pause bu on.
• Ini ial condi ions
- Wash : main wash
- Rinse : 3 times
- Spin :
• 1200 rpm [WD(M)-12331(6)FDK]
• 1400 rpm [WD(M)-14331(6)FDK]
• 1600 rpm [WD(M)-16331(6)FDK]
- Water temperature : 60˚C
- Program : Cotton
• Press he Power bu on o s ar .
• Selec he condi ions which you wan o use,
by urning he program dial and pressing
each bu on.
For selecting the each conditions, please refer to
the page 16~page 21.
• Press he Start/Pause bu on.
1. Cotton automatically
selected upon power on.
2. Manual Selecting

16
ow to use washer
H
(1) Dial : Program
(2) Bu on : S ar /Pause
(3) Bu on : In ensive
(4) Bu on : Rinse Hold
(5) Bu on : Rinse+
(6) Bu on : Pre Wash
(7) Bu on : Crease Care
(8) Child Lock
(9) Bu on : Power
(10) Bu on : Spin
(11) Bu on : Time Delay
3. Rinse+
Option
• By pressing he
Op ion bu on,
all Op ion
func ions may
be selec ed.
• For addi ional rinse which may assis in
removing races of de ergen residue.
• By selec ing Rinse+func ion, he rinse ime
and he rinse wa er are increased.
4. Pre Wash
• If he laundry is heavily soiled,
“Pre Wash” course is effec ive.
• Pre Wash is available in Co on and
Syn he ic.
The required lamp will light up for identification.
2. Rinse Hold
• Is selec ed by pressing he Rinse Hold
bu on his func ion leaves clo hes in he
machine; suspended in he wa er af er a
rinse wi hou en ering in o spin.
• To proceed hrough o a drain or spin, once
he rinse hold func ion is comple ed using o
program dial scroll o he required program.
5. Crease Care
• If you wan o preven crease, selec his
bu on wi h spin speed.
1. Intensive
• If he laundry is heavily soiled “In ensive”
op ion is effec ive.
• By selec ing he In ensive op ion, he wash
ime may be ex ended, depending on he
program selec ed.
• This Op ion is no available wi h Quick 30
program.

17
ow to use washer
H
2. No spin
Spin
• By pressing he Spin bu on, he spin speed can be chosen.
• If no spin is selec ed, he washer s ops af er
draining wa er.
The required lamp will light up for identification.
[WD(M)-12331(6)FDK]
[WD(M)-16331(6)FDK]
[WD(M)-14331(6)FDK]
1. Spin selection
• Spin Speed is available according o
he program as follows.
WD(M)-12331(6)FDK
- Cotton, Rinse+Spin, Quick 30, Eco
No Spin - 400 - 600 - 800 - 1000 - 1200
- Synthetic, Wool/Silk, Hand Wash
No Spin - 400 - 600 - 800 - 1000
- Delicate
No Spin - 400 - 600 - 800
WD(M)-14331(6)FDK
- Cotton, Rinse+Spin, Quick 30, Eco
No Spin - 400 - 600 - 800 - 1000 - 1200 - 1400
- Synthetic, Wool/Silk, Hand Wash
No Spin - 400 - 600 - 800 - 1000
- Delicate
No Spin - 400 - 600 - 800
WD(M)-16331(6)FDK
- Cotton, Rinse+Spin, Quick 30
, Eco
No Spin
- 400 - 600 - 800 - 1000 - 1200 - 1400 - 1600
- Synthetic, Wool/Silk, Hand Wash
No Spin - 400 - 600 - 800 - 1000
- Delicate
No Spin
- 400 - 600 - 800
Spin only:
1. Press he Power bu on.
2. Se he desired spin speed by pressing he
Spin bu on.
3. Press he Start/Pause bu on.
(400–600–800–1000–1200)
(400–600–800–1000–1200–1400–1600)
(400–600–800–1000–1200–1400)

18
ow to use washer
H
Water Temp.
• By urning he Program Dial, he wa er
empera ure can be selec ed.
- Cold ( )
- 30˚C / 40˚C / 60˚C / 95˚C
• Wa er empera ure can be selec ed
according o he program.
The required temperature lamp will light up for
identification.
For the more detailed information, please refer to
the page 14.
Child Lock
If you choose o lock he
bu ons on he con rol
assembly o preven
ampering his func ion
may be selec ed.
• Child Lock can be se by pressing he Rinse+
bu on and Pre Wash bu on simul aneously.
(Abou hree seconds)
• When child lock is set, all buttons are inoperable
except for power button.
• To deac iva e Child Lock sys em, press
Rinse+and Pre Wash bu ons simul aneously
again. (Abou hree seconds)
• To change o he desired program, whils in
child lock mode.
1. Press bo h Rinse+and Pre Wash oge her
once again. (Abou hree seconds)
2. Press he Start/Pause bu on.
3. Selec he desired program and press he
Start/Pause bu on again.
• The child lock can be se a any ime and i is
au oma ically canceled when opera ional
errors occur. Also Child Lock works when
power is off.

19
Program
• 9 programs are available according o he
laundry ype.
• Lamp will ligh up o indica e selec ed program.
• When Start/Pause bu on is pressed, he
Co on program is au oma ically selec ed.
- By urning he Program dial, he program is
selec ed in order of
“ Co on - Eco - Delica e - Quick 30 -
Rinse+Spin - Drain - Hand Wash - Wool/Silk
- Syn he ic”.
Regarding to the laundry type for each program
Please refer to the page 14.
ow to use washer
H
Time Delay
Preparing washing before starting
“Time Delay”
- Turn on he wa er ap.
- Load laundry and close he door.
- Place he de ergen and fabric sof ener in he
drawer.
• How o se “Time Delay”
- Press Power bu on.
- Turn he Program dial o selec
he program you require.
- Press Time Delay bu on and se he
desired ime.
- Press he Start/Pause bu on.
(“:”blinks.)
• If Time Delay bu on is pressed, “3:00” is
displayed. The maximum delayed ime is 19
hours and he minimum ime is
3 hours.
• Each pressing of he bu on advances on
ime delay by one hour.
• To cancel he ime delay, press he Power
bu on.
• Time Delay is ‘expec ed ime’ from he
presen o he comple ion of washing cycle or
selec ed process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.