Li-polymer XQSC1203A User manual

,?
.;$/'
"f, tffihmmmhtesr
! xoscrzosr
I xoscraoar
I xoscz+osa
=$ssF'*k'rl*lu" &%",5;,
".?*,
?
I xoscrzo+a
! xoscreo+a
f, xosczlozr
SAVEBASE

f . Product overview... 2
lf , Conformation......... 2
ffl. Specification........ 4
lV. Use Guide........ ..................... 4
V. maintenance.......... s
Vl. Advantage 5
Vll. Accessories
viii. Available............. 6
lX, Model Catalog..... 6
-l-
SAVEBASE

l. Product overview
The portable laptop solar power station with high quality Li-polymer batt
ery pack, it suits for laptop/mobile phone/digital camera/ PDA/MP3/MP4/G
PS and more digital device, the inner cell also could store the power by
the mains supply while without the sun' s rays, so it is used for busin
ess, journey, field work as a spare power, the stately and smart desig
n is very attract, laptop shape, easy to carry, economical and practical.
ll. Conformation
,,; ." .: jl
l"o**r"*
DCI6 DC6V-DCI2V
OUTPUT
INPUT
(INNER CELL)
OUTPUT
a
SAVEBASE

LOGO
FL,]NCTION K.EYS AND
LED INDICATE
HEAT DISSIPATION PART
POLY
HEAT DISSIPATION PART
-3-
SAVEBASE

lll, Specification
'l . Product size: 260mm x 200mm x 33mm
2. Cell size: (233mmx168mmx4mm)-2 Cells
3. Solar Power : 10W ( high quality poly-silicon )
4. Solar turnover rate uP to 16%
5. lnput: DC12V-20V
6. Output: DC 6V/8'4V/9V l12V l16V l19Vl24V'
7. Max output current: ( refer enclosed list )
8. USB outPut:DC5V
9. USB current output: 2A
10. Inner high capacity Li-polymer cell pack: ( refer enclosed ) ;
lV. Use guide
t ::::[1"!! "* LED indication,it shows the battery current capacitv 'the
tolerant voltage is DCOV
' ::::H @ ur,", six seconds, the LED put out and the power orr.
3. capacity indication
eress"KfV"@ about 0 5 seconds,shows the capacity percentage by the line
width,it could reference the capacity of the battery'
4. voltage switch
A. Press KEY Et per 2 seconds turned one work voltage'
and you could continuously "hoosgthe suited voltage between DCOV' DC8'4V
12V. 16V. 19V, 24V
-4-
9V.
SAVEBASE

B, Choose the proper voltage according to your device,and then connect equal plug
and cable to your device ,and connect the cable to the counterpart power station
jack,the LED will indicate when working.
". *"8 will be locked while charging ,this make sure the voltage could not
be changed because of fault operation,that could protect the device.
D. meanwhile you also could charge for your mobile phone or other device with the l
USB (DC 5V) output.
V, Maintenance l
1 , in order to insure the perfect work,you need to charge the battery saturated
by the mains supply at first time.
2. lf the power station is shelved and untapped out of three month,you'd better
to charge the inner battey to 80% ( that is till the sixth LED get light ) .
3. Charge:
A. Mains supply;
The time of finished charge is 4-6 hrs with adaptor(DC12v-20v),the LED will
circulate to scheduled indication(till all of the LED get light),
B. Solar supply;
The time of finished charge is 12-20 hrs with the solar ( depend on the light
strength ) the "Solar Charger" LED gets light.
..Vll,*aianl ',,.':' .''-'' .- " -:: ""'.,.::'..r'::".1 1 ;
1. fancy design,Touch switch capacity/voltage,voltage simulation
and power status indication.
2. intellect protective lC,achieve protection of over charge,over
SAVEBASE

release,over loading and short circuit.
3. different adaptor available,suits for most of mobile
phone,MP3,MP4, PDA,GPS,digital camera and laptop'
Vll. Accessories
1. Solar adaptor: 1 Pc
2. cable: 3 ocs
3. plug adaptors:16pcs
4. Colour box package
Vlll. Optional equipment
1, DC 16V adaptor
2. AC cable
3. Laptop solar power station special bag
lX. Enclosed ( model and standard )
Model Capacity (mAJh) Max output current (A)
xosc12034 12000 3.75
xosc1204A 1 2000 4.5
xosc1803A 1 8000 3.75
xosc1804A 18000
xQsc2205A 24000
xosc2207A 24000 7. O
Remark: this specification and appearance just for your reference, it is to
be noted that all these information are subject to change without notice'
Pardon the Inconvenience! -6-
SAVEBASE