LifeOX AIR- OZZY User manual

MAINTENANCE AND TROUBLESHOOTING
If malfunction occurs, do not repair device on your own. Contact your seller.
Malfunction
How to solve it
Ozone generator doesn´t
work
Check all cable connections and car battery charge.
Ozone generator is noisy
Disconnect ozone generator
from socket, remove filter,
clean it with hoover and
place it back.
TECHNICAL DETAILS:
CONTENTS OF PACKAGING:
Voltage
12V DC/230V AC
Item
Amount
Power
max. 10 W
Ozone generator LifeOX®-AIR OZZY
1 pc
Model
aluminium, plastic
Adapter 230V /12V
1 pc
Weight
500 g
Instructions for use
1 pc
Dimensions
70x70x185 mm
Guarantee certificate
1 pc
Protection
IP 20
Sticker (Certificate of purity)
… pc
Fuse
protecting car battery
from discharge
Supply CL conductor
1 pc
DO NOT THROW USED DEVICE INTO UNSORTED WASTE,BECAUSE IT CONTAINS
SUBSTANCES DANGEROUS FOR ENVIRONMENT.DEVICE MUST BE PUT TO
APPROPRIATE RECYCLING CENTER AND RECYCLED SUBSEQUENTLY.
Produced by:
LIFETECH s.r.o., Sumavska 15, 602 00 Brno, Tel. + 420 541 592 253, www.lifeox.com
INSTRUCTIONS FOR USE -LIFEOX®AIR-OZZY
USE: SMELL,BACTERIA AND MOULDS REMOVAL FROM INDOOR SPACES,CARS
(INCL.AIR-CONDITIONING SYSTEMS), HOUSEHOLDS,OFFICES,ETC.
CAUTION! READ THIS MANUAL CAREFULLY BEFORE USING DEVICE!
START-UP IN 4STEPS:
Place device on a solid
base
Plug device into a
socket
Set time
Ventilate the space after
end of the process

CAUTION –INSTRUCTIONS
If you need to enter treated space before end of cleaning process, open
windows, doors, turn device off and ventilate the space.
Remove plants and prevent people from entering space during
ozonation!
Long-term inhalation of ozone can cause eye and respiratory system
irritation!
Keep device in dry environment! Avoid high temperatures!
Do not use in dusty and oily environment!
Do not use near explosives and flammable substances!
Do not cover holes for air inlet and outlet of ozone generator!
Do not use device with damaged cable or fan not running!
Do not use device without inlet filter! Sucked particles can damage the
device.
Device does not damage clothes, shoes, upholstery, etc.
If you bring device from low temperature space to one of higher
temperature, wait a few minutes for device to warm up.
In case the voltage of car battery falls under 10V, ozone generator turns
off automatically.
START-UP (DETAILS):
For car use follow steps 1 - 8. For other spaces steps 1-3, 7, 8.
1. Remove sources of smell from treated space (including air fresheners, food, etc.).
2. Level the ozone generator to horizontal position (for example on passanger front
seat). If smell is concentrated on one spot, point ozone outflow at it (Note: outflow
side is the one without a filter).
3. For short treatment plug the device in 12V (front panel of the car) or 230V socket
for longer treatment (use adapter, put extension cord through narrow gap in
window). Device contains fuse against battery depletion, so you don´t need to be
afraid you will not start the car engine. In trucks with 24V socket use 12V to 24V
adapter for using device.
4. Turn radio and lights off.
5. If you want to disinfect air conditioning and ventilation system, turn inside (closed)
cirulation on (on lowest level), flow through front panel and temperature on lowest
level. If its too hot outside, set the air-conditioning approximately to 20°C.
6. Make sure that you closed all windows (except gap in case of extension cord) and
secured doors against entrance.
7. Turn the device on, set time and leave treated space. (If you are willing to change
time setting, turn the device off and set time anew.)
8. Ventilate the space after treatment for 10-15 minutes or wait 1 hour for ozone to
decompose. If you still feel bad smell after treatment, it is necessary to repeat
ozonation process. After second treatment the disinfection process is usually
finished.
EXAMPLE TIME SETTING ACCORDING TO SPACE VOLUME