LIFX Z User manual

LIFX.COM

MEET YOUR NEW LIFX®
LIFX is color changing, Wi-Fi lighting that you
control with your smartphone or tablet.
With the LIFX app you can switch your lights on
and off, dim, adjust brightness and color, set
different scenes and set wake up and sleep timers.
You can control individual lights, rooms, or the
entire house.
Even if you don’t have your smartphone with you,
LIFX still functions like a normal light by switching
on and off with a regular light switch.

ALL YOU NEED TO BEGIN IS...
Simply complete the installation and setup steps on the next pages then follow the
app prompts to enjoy your new lights!
• A device running iOS 9.0+ or Android 4.1+
• A Wi-Fi Internet connection. Wi-Fi access point
must be 802.11b, g or n compliant with WPA2 security
and a DHCP-congured connection available for every
connected LIFX® light.
• The LIFX app from your app store or at go.lifx.co

LIFX Z
EXPERIENCE
LIFX Z LIFX Z
EXTENSION
2 strips, 2m / 6.6’ 1 strip, 1m / 3.3’ 3 strips, 3m / 9.9’

STICK
CLEAN
INSTALL
PEEL

SWITCH ON
CONNECT
SETUP
go.lifx.co
GET APP

EXTEND
Max 10m / 33’
1 second

CARE
Max 90° bend Do not bend at LED

Use HomeKit setup
code on manual
HomeKit™
“Add accessory”
Open Apple Home App
1. 2. 4.
5.3.
Open App Store
Get
Apple Home
App
Use iOS 10.0
or later.

Apple HomeKit technology provides an easy, secure way
to control your home’s lights, doors, thermostats, and
more from your iPhone®, iPad®, or iPod touch®.
To control this HomeKit-enabled accessory, iOS 10.0 or later is recommended.
Controlling this HomeKit-enabled accessory automatically and away from home
requires an Apple TV with tvOS 10.0 or later or an iPad with iOS 10.0 or later set
up as a home hub.
Use of the Works with Apple HomeKit logo means that an electronic accessory has
been designed to connect specically to iPod touch, iPhone, or iPad, respectively,
and has been certied by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards.
Keep your user manual for the HomeKit setup code in the future.
Apple, iPhone, iPad and iPod touch are trademarks of Apple Inc., registered in the
U.S. and other countries. HomeKit is a trademark of Apple Inc.

REGULATORY & COMPLIANCE INFORMATION
Specifications
To see a full list of LIFX® product specications applicable to this Product, go to
www.lifx.com/compliance
Certification
LIFX® adheres to the certication requirements for various regions around the world.
To see a full list of LIFX® certications please go to www.lifx.com/compliance to
ensure LIFX® complies with the certication requirements in your region.
FCC Compliance Statement U.S
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used under the instructions, may interfere with radio or television reception, which
can be determined by turning the equipment off and on. The user is encouraged

to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Changes or modications not approved by LIFX can void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. Contains FCC ID: PPQ-MP1
EU Declaration of Conformity and Industry Canada
Compliance.
LIFX complies with all applicable EU Directives and Industry Canada Standards. This
Class B RFLD complies with the Canadian standard ICES-005. Contains IC: 4491A-
MP1. See www.lifx.com/compliance

RF EXPOSURE WARNING
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to provide
a separation distance of at least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.

Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
Déclaration d’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux rayonnements IC
établies pour un environnement non contrôlé.
CHANGES & MODIFICATION
Changes or modications made to this device may void certication of the
device. Changes or modications made to this unit not expressly approved by
the party responsible for compliance could void the user‘s authority to operate
the equipment.

CHANGES & MODIFICATION
Changes or modications made to this device may void certication of the
device. Changes or modications made to this unit not expressly approved by
the party responsible for compliance could void the user‘s authority to operate
the equipment.
RECOMMENDED INSTALLATION REQUIREMENTS
This device should only be installed in light ttings and xtures that are designed
to accept each tting. Lamps, ttings and xtures that are designed to accept
smaller or lower wattage light bulbs may result in the LIFX® bulb operating below
its optimal capacity. For optimal performance it is recommended that LIFX® bulbs
be tted into xtures that provide sufcient air ow through and around the bulb.
It is recommended that the LIFX® bulb be installed away from other devices
designed to receive or transmit radio signals. It is recommended LIFX® bulb/s
be installed and operated at a minimum distance of 30 cm from the body.
For lamps with a weight signicantly higher than that of lamps for which they are
a replacement, attention should be drawn to the fact that the increased weight
may reduce the mechanical stability of certain luminaires and may impair contact
making and lamp retention.

INTERFERENCE
LIFX® has been designed to minimise interference with other radio, broadcast
or receiving devices. The manufacturer is not responsible for any interference
caused as a result of modications to the product or by failure to adhere to the
recommendations in this document and at support.lifx.com. This device generates
radio frequency energy and, if not installed in accordance with the “recommended
installation requirements” may cause harmful interference to radio communication
devices. If the device is causing radio interference it is recommended that the
user try:
a) relocating the device to a different place;
b) adjust the antenna on the receiving device;
c) consult a technician experienced in radio interference.
NOTICES
• This device is not intended for use with emergency exits
• Use in open luminaire only
• Added weight of the device may cause instability of a free-standing portable
luminaire

• Use in dry and damp locations only
• Suitable for operation in ambient temperature not exceeding 40ºC
LIFX® is not designed for use in:
• Excessively hot environments (e.g. close to ovens, radiators, heaters, etc.)
• Regions or countries other than that in which the product was intended for
• Outdoor and wet areas, except where the LIFX® Product species that it is for
both Indoor and Outdoor use
WHEN USING LIFX®
• Switch off the power supply to the device and allow sufcient time for it to cool
before handling it
• Do not open device, as this will void the warranty
• Do not clean the device when it is powered on and or connected to the wall
socket
• If cleaning the product, use a soft dry cloth, do not use cleaning agents

LIMITED WARRANTY
GENERAL
Li Labs Inc. (“LIFX®“) warrants the LIFX® bulb (the “Product“), and only the
Product, against defects in materials and workmanship under normal use (“Defect”)
for a period of TWO YEARS (730 days) from the date of retail purchase by the
original purchaser (“Warranty Period“). Under this Limited Warranty, if a defect
arises and a valid claim is received by LIFX® within the Warranty Period, at its
option and to the extent permitted by law, LIFX® will either: 1. repair the Product
at no charge, using new or refurbished replacement parts --or-- 2. exchange the
Product with a new or refurbished Product.
In the event of a defect, to the extent permitted by law, these are your sole and
exclusive remedies. A replacement Product or part assumes the remaining warranty
of the original Product or ninety (90) days from the date of replacement or repair,
whichever is longer. When a Product or part of the Product is exchanged, any
replacement item becomes your property and the replaced item becomes LIFX®‘s
property. Parts provided by LIFX® in fullment of its warranty obligation must be
used in Products for which warranty service is claimed.

EXCLUSIONS & LIMITATIONS
This Limited Warranty applies only to the Product manufactured by or for LIFX® that
can be identied by the “LIFX® trademark, trade name, or logo afxed to it. The
Limited Warranty does not apply to any (a) LIFX® products and services other than
the Product, (b) non- LIFX® hardware product, (c) consumables (such as batteries),
or (d) software, even if packaged or sold with the Product or embedded in the
Product. Refer to the licenses accompanying the software for details of your rights
with respect to its use. LIFX® does not warrant that the operation of the Product
will meet your needs or requirements or be uninterrupted or error free. LIFX® is
not responsible for damage arising from failure to follow instructions relating to the
Product‘s use or from failures resulting from inadequate electrical supply or internet
access. This warranty does not apply to a Product or part of the Product that has
been altered or modied (e.g. to alter functionality or capability) by anyone who is
not a representative of LIFX® or if the Product is inserted or installed in a casing not
provided by LIFX®. In addition, this Limited Warranty does not apply to Defects or
damage caused by (a) use with non-LIFX® products; (b) accident, abuse, misuse,
ood, re, earthquake or other external causes or abnormal conditions; (c) operating
the product outside the permitted or intended uses or conditions described by LIFX®
or with improper voltage or power supply; or (d) service (including upgrades and
expansions) performed by anyone who is not a representative of LIFX®. Recovery and