BG Electrical Smart! User manual

Your life Connected, Your life Smarter
Take control of your
power from anywhere
Control your Power by:
Voice Touch
Mobile
Setup Guide
Compatible with:
Use with the
BG Home app
Download the BG Home App for your Android or iOS device.
1. Install the BG Home App 2. Account creation
Follow the on-screen advice to set-up an initial account
If you have a BG Home account already skip to “Add Device”
Scan the QR code belowScan the QR code below
3. Socket setup
On the App select ‘Add device’
Ensure that your Smart Socket is connected
to the power supply as per the ‘Wiring
Instructions’ supplied. After the initial power
up both switch LED indicators will illuminate
RED and start to blink and the socket will be
ready for setup.
A B
Press and hold button A for 5 seconds.
The socket will then enter Wi-Fi
conguration mode and the indicator
illuminated RED ashing quickly.
Once set up your mobile device will
indicate a successful connection and
the Red indicator on the socket will
turn off.
You can now plug in the device you would like to control.
If these setup procedures fail, follow the “AP Cong” setup
and the step by step instructions on the App.
Press and hold button for
5 seconds. The adaptor
will then enter Wi-Fi
conguration mode and the
indicator illuminated RED
ashing quickly.
Once set up your mobile
device will indicate a
successful connection and
the Red indicator on the
socket will turn off.
You can now plug in the
device you would like to
control.
Device Setup
Adaptor Setup
Power control on the adaptor
can be manual or ‘smart’
The power button will illuminate
BLUE for ON
POWER BUTTON
Socket Setup
On the App select ‘Add device’
Ensure that your Smart Adaptor is connected to the power supply.
After the initial power up the switch LED indicator will illuminate
RED and start to blink and the adaptor will be ready for setup.
3. Adaptor setup

Connecting Additional Smart Devices
To connect additional BG Home Smart Devices, please follow the steps below:
1. Connect and power up the device
2. Press and hold the power button until the RED LED ashes quickly
3. Go to the BG Home app and ‘Add Device’
4. Once found and connected name the device accordingly
Repeat for all additional BG Home Smart Devices.
Third Party Control Overview
If you’re new to Echo, it’s a super smart speaker from
Amazon that responds to your voice.
Once you’ve bought Amazon Echo and downloaded
the BG Home App, you’ll just need to enable....
1. Enable the BG Home App
In your Alexa app, tap Skills in the menu and search
for BG Home. Tap Enable.
2. Link Account
Enter your BG Home App username and password
and follow the onscreen instructions.
3. Talk to Alexa
Now the fun part. Ask Alexa to control your BG Smart
Home device. Check a full list of things you can
control by clicking here.
Now you can use Google’s voice-activated speaker
to control your Smart Home sockets and adpators.
With the Google Assistant, you can turn on your
lights without pressing a button!
1. Setup
Start by getting the Google Home app and setting up
your Google Home if you have not done this already.
2. Add BG Smart Home Action
In the Google Home app tap the menu icon and
select Home Control. Then tap the + button to see a
list of Actions tapping BG Home to select the Action.
3. Link your Hive Account
Now follow the in-app instructions to link your BG
Home App account. Once complete you’ll be able to
say ‘Ok Google, turn my lamp on’ or ‘Ok Google set
hallway to ON/OFF’.
Additional Support & FAQs
For additional support and FAQs please view the ‘Me’
section of the BG Home App.
Stuck? Confused?
Contact our Technical Support team on:
T: [phone] or [phone]
E: [email protected]
Lines are open Mon - Fri (08:30 - 17:00)