Lightolier F7000-26 User manual

"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lighting Systems F7000-26
1BHFPG '4FSJFT-JHIU5-FOT8BMM.PVOU
(
Features
1. Housing: Single piece of high purity extruded aluminum, a portion from
recycled material.
2. Housing End: Die-cast aluminum, welded in place.
3. End Cap: Die-cast aluminum. Encloses the end of the run.
4. Lamps: F28T5 or F54T5HO as specified. By others. Installed fromthe
ceiling side of the luminaire.
5. Ballast: Electronic. Meets ANSI starting, end-of-life protection and sound
rating specifications. Low THD.
6. Shielding: Extruded acrylic with suspended bead texture; inset metal rod.
Electrical
Connections: Pre-wired with 18 gauge wires and polarized cannon plug con-
nectors for simultaneous mechanical/electrical connection.
Emergency Battery Pack: 90 minute operation, 700 lumens for 54W and 520
lumens for 28W.
iGEN: F7000 accepts iGEN (DALI) with supplemental 2-wire control technology.
Use with X5 power feed.
Power Tray: Code-gauge, die-formed steel, pre-paint white enamel finish;
secured by quarter-turn fasteners for easy access to wiring. Holds ballasts, sock-
ets, and wiring. Accepts ballasts up to 1.25” (3.18cm) wide by 1.20” (3.05cm) high.
Finish
Powder-coated, baked enamel, white or aluminum, as specified.
Labels
UL, cUL and I.B.E.W.
Ordering Instructions
Individual Fixtures:
1. Order one MODULE.
2. Order one END SET.
Continuous Rows:
1. Order the appropriate number of MODULES for the complete run.
2. Order one END SET.
Finish
Powder coated White or Aluminumbaked enamel.
Customcolors are available, consult factory.
Labels
UL , cUL and I.B.E.W.
Mounting
Each module includes two wall-mounting brackets. Bracket hole pattern accom-
modates junction box (single gang box rotated 90 degrees) or other appropriate
mounting method using customer supplied fasteners.
Ordering Information
4.51” (11.46cm)
1.63”
(4.14cm)
3.25”
(8.26cm)
FW7
Family Series
6
Type Lamps Color Wattage Voltage Length
5 1
6= Lens 5= Extruded
Lens
1= 1 LampAL = Aluminum
WH = White
1= 28W
2= 54W
3= 28W Dimming
4= 28W EM
5= 54W Dimming
6= 54W EM
1= 120v
2= 277v
4= 4’ (121.92cm)
8= 8’ (243.84cm)
1
6
4
5
Complete Ordering Instructions below.
Factory installed ballast disconnect allows the ballast to be disconnected fromand
reconnected to incoming power under load without turning the entire circuit off.
Dimming: Advance Mark X standard for 54W lamps (no additional wires required)
or ULT Super Dimstandard for 28W lamps (5 wires required in end set); use
compatible dimmer.. Dimming ballasts using additional control wires (e.g. Lutron
Hi-Lume or ECO-10, Osram) can be used; consult factory and use X4 or X5 power
feeds with additional leads, as appropriate. Ballast not to exceed 1.25” (3.18cm)
wide by 1.20” (3.05cm) high.

Job Information Type:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems F7000-26
1BHFPG '4FSJFT-JHIU5-FOT8BMM.PVOU
(
CANDLEPOWER
ZONE 0 22 45 67 90
DEG. CANDELAS
0 510 510 510 510 510
5 519 519 520 516 510
15 523 523 519 508 492
25 508 505 497 479 455
35 477 474 458 435 405
45 431 427 406 378 340
55 375 367 341 307 264
65 304 296 267 228 181
75 223 216 185 142 92
85 151 141 106 62 18
90 132 120 85 42 0
95 164 153 129 104 38
105 378 383 366 341 186
115 656 652 624 504 351
125 894 874 775 650 506
135 988 960 887 774 646
145 1048 1022 957 870 767
155 1056 1039 999 928 860
165 1033 1020 996 957 921
175 972 967 967 959 952
180 950 950 950 950 950
Performance
CANDLEPOWER CURVE
1000
750
500
250
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
REPORT NO.: ITL54696.IES
LAMPS: 1-F54T5
LUMENS: 5000 each
EFFICIENCY: 81.6%
CAT. NO.: F7762WH214
DISTRIBUTION
Zone Lumens % Lamp %Luminaire
0 - 90 1279 25.5 31.0
90 - 180 2790 56.1 69.0
0 - 180 4069 81.6 100.0
80% 70% 50%
50 30 10 50 30 10 50 30 10
0 838383 7676 76 606060
1 727066 6563 60 525048
2 635854 5753 49 454340
3 554945 5045 41 403633
4 484337 4438 34 353128
5 433732 3933 30 312724
6 393227 3530 26 282420
7 352824 3126 22 262118
8 312621 2923 20 231916
9 292319 2620 17 211714
10 26 20 16 24 19 15 20 15 13
20% FLOOR CAVITY REFLECTANCE
COEFFICIENTS OF UTILIZATION
% EFFECTIVE CEILING CAVITY REFLECTANCE
WALL REFLECTANCE
ROOM CAVITY RATIO
Mounting Accessories
Fixture Lengths & Mounting Reflected (Plan View)
20'-3" (617.22cm)
16'-3" (495.30cm)
12'-3" (373.38cm)
8'-3" (251.46cm)4'-3" (129.54cm)
2'-8"
(81.28cm)6'-8" (203.20cm)
6'-8" (203.20cm)2'-8"
(81.28cm)
1'-4"
(40.64cm)
6'-8" (203.20cm)1'-4"
(40.64cm)6'-8" (203.20cm)
6'-8" (203.20cm)1'-4"
(40.64cm)6'-8" (203.20cm)2'-8"
(81.28cm)
1'-4"
(40.64cm)
16.00" (40.64cm)
3/4"
(1.91cm)
1-1/2"
(3.81cm)
3/8" (0.95cm)
END OF ROW DETAIL
GAP BETWEEN FIXTURES
JOINING DETAIL
Recommended mounting is a single gang outlet box rotated 90 degrees at the
feed point. Remaining mounting points could be outlet boxes as well, or a couple
of holes per mounting point spaced 3-1/4” (8.26cm) at 1-3/4” (4.45cm) above the
bottomof fixture.
Wall Mount End Set
FW7EWH = White
FW7EAL = Aluminum