Lightolier LFK3 User manual

Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems LFK3
1BHFPG -JHIU51FS'PPUDN/PNJOBM4FDUJPO
#
4.295"
(10.91cm)3.400"
(8.64cm)
4.895” (12.43cm)
Half Scale
1
35 4
2
Features
1. Extrusion: Extruded aluminum, painted white.
2. Housing: Multi-layered 5/8" (1.59cm) thick polycarbonate panels with patented
prismdesign. Clear outer layer and an opal non-glare inner layer. Light
transmission is 32% ASTM D1003 perpendicular to the panel. Reflectivity is
more than 40% perpendicular to the panel.
3. Endcap: Die cast aluminum, painted white.
5. Lamp: T5 linear fluorescent, 28 or 54 watt. (by others).
Electrical
Ballast: Electronic and meets A.N.S.I. starting, end of life protection, T.H.D., "A"
W
iring: 3 Conductor 18 gauge wire. Color-coded quick connectors allow ease of
connection for fixture modules.
Dimming: Advance Mark X. Use Advance compatible 2 wire control (no extra
lead is required in the luminaire).
Emergency Battery Pack: 54 Watt: 390-700 Lumens for 90 minutes,
28 Watt: 370-520 Lumens for 90 minutes.
Dual Switching: Order the DS option for separate row switching. DS option
comes complete with the 4th through wire option.
4 and 5 wire: Order X4 for EM Battery Pack. For non-standard dimming options
order X5 option for Osramor DALI 54 watt dimming, X4 option for Lutron
HiLume or ECO-10 54 Watt dimming.
Consult Factory for any additional wiring conditions.
Ordering Instructions
Individual Fixtures:
1. Order number of MODULES required.
2. Order one POWER FEED CABLE END SET per MODULE.
Continuous Rows:
1. Determine run length.
2. Order the appropriate number of MODULES for the complete run.
3. Order one POWER FEED CABLE END SET per run.
4. Order one INTERMEDIATE CABLE SET per MODULE minus one per run.
5. For runs that exceed amperage limits, order the appropriate number of
CABLE/CORD SET.
Labels
UL , cUL and I.B.E.W. Patent Applied For.
Mounting
Mounting locations are adjustable along the top of the extrusion. Cable suspension
(not shown) consists of 4 1/2" (11.43cm) diameter canopy finished white enamel,
1/16" (0.16cm) diameter stainless steel aircraft cable adjustable up to 36”
(91.44cm). Draw-tight connector to create hairline seambetween joiner modules.
Ordering Information
LFK 2 N
Family Lamps Shielding Wattage Voltage Length
2=2lamps per
4’ (121.92cm)
N= No
Sheilding
28 = 28w T5
54 = 54w T5
2D = 28w T5 Dimming
5D = 54w T5 Dimming
2E = 28w T5 Emergency Pack
5E = 54w T5 Emergency Pack
1
2= 277v
4= 4’ (121.92cm)
8= 8’ (243.84cm)
Complete Ordering Instructions below.
Options
DS = Dual Switch
X4 = 4 Through Wires
X5 = 5 Through Wires
sound rating, and end-of-life specifications. Factory installed ballast disconnect
allows the ballast to be disconnected fromand reconnected to incoming power
under load without turning the entire circuit off.
Finish
Powder coated white baked enamel. Customcolors available, consult factory.
= 120v
by 1.2" (3.05cm) tall.
Accepts linear fluorescent ballasts up to 1.2" (3.05cm) wide4. Ballast Channel:

Job Information Type:
"JSQPSU3PBE'BMM3JWFS."tt'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt
Lighting Systems LFK3
1BHFPG -JHIU51FS'PPUDN/PNJOBM4FDUJPO
#
CANDLEPOWER
ZONE 0 22 45 67 90
DEG. CANDELAS
180 161 161 161 161 161
175 159 182 218 243 257
165 154 285 449 566 607
155 146 400 337 831 891
145 136 507 838 931 913
135 118 566 764 583 518
125 93 585 398 481 463
115 65 353 316 423 468
105 36 132 277 424 482
95 11 88 228 405 492
90 0 73 208 394 483
85 31 107 237 418 503
75 280 331 383 512 566
65 586 774 611 632 673
55 876 1228 1123 1048 960
45 1133 1497 1548 1446 1445
35 1352 1627 1892 1890 1856
25 1527 1692 1941 2078 2109
15 1646 1722 1846 1937 1979
5 1712 1720 1745 1751 1760
0 1709 1709 1709 1709 1709
Performance
REPORT NO.: ITL54307
LAMPS: 2-F54T5
LUMENS: 5000
EFFICIENCY: 87.2%
CAT NO.: LFK2N5414
CANDLEPOWER CURVE
80% 70% 50%
70 50 30 70 50 30 50 30 10
0 979797 9292 92 828282
1 888480 8379 76 716966
2 807367 7569 64 625854
3 736457 6961 55 555045
4 675749 6354 47 484339
5 615043 5848 41 433833
6 564538 5343 36 393329
7 524133 4939 32 353025
8 483730 4635 29 322622
9 453427 4232 26 292420
10 42 31 24 40 30 23 27 22 18
20% FLOOR CAVITY REFLECTANCE
COEFFICIENTS OF UTILIZATION
% EFFECTIVE CEILING CAVITY REFLECTANCE
WALL REFLECTANCE
DISTRIBUTION
Zone Lumens % Lamp %Luminaire
0-90 6130 61.1 70.0
90-180 2586 26.1 30.0
0-180 8716 87.2 100.0
ROOM CAVITY RATIO
Fixture Lengths & Mounting
4' (121.92cm)
8' (243.48cm)
Note: All suspension points have
6" (15.24cm) of adjustment within
each module. 12" (30.48cm) when
two modules are joined. Field
cutting of wire cover is required.
12’ 0-3/4" (367.67cm)
16’ 0-3/4" (489.59cm)
8' (243.48cm) 8' (243.48cm)
8' (243.48cm)
8' (243.48cm)
8' (243.48cm)
8' (243.48cm)
8' (243.48cm) 8' (243.48cm)
4' (121.92cm)
4' (121.92cm)
20’ 0-3/4" (611.51cm)
24’ 0-3/4" (733.43cm)
8’ 0-3/4" (245.75cm)
4’ 0-3/4"
(123.83cm)
Mounting Accessories
Power Feed Cable End Set Intermediate Cable Set
Cable length is 36" (91.44cm)
Single Cable: LFKC36
Intermediate
Cable/Cord Set
Cable length is 36" (91.44cm)
Straight Cord: LFKCC36
Ceiling Grid Kit (CGK)
Includes both standard
1" (2.54cm) Tee and Slot
Tee Clip.
Order one for every non-
powered suspension point.
Ceiling Grid Kit—
Power (CGKP)
Includes the hardware
necessary to install a
power feed above a
suspended ceiling. J-box
not included. Order one for
every powered suspension
point.
4 Wire Cord: LFKCC36X4
5 Wire Cord: LFKCC36X5
Cable length is 36" (91.44cm)
Straight Cord: LFKEC36WH
4 Wire Cord: LFKEC36WHX4
5 Wire Cord: LFKEC36WHX5