LED-RPS-50
Architectural Decorative, LED remote power supply
Page 2 of 2
Philips Lightolier
t: (508) 679-8131
w: www.lightolier.com
LED-RPS-50 February 27, 2012
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2012.All rights reserved.
Job Information Type:
Features
1. Housing: 16ga. steel die stamped and formed.
2. Housing Cover: 16ga. steel die stamped and formed.
Electrical
3. Metallic Flexible Conduit: 6', 5/16" conduit with 18ga.
black, white and green wire for hard-wiring to a junction
box (by others).
4. Power Supply: 24V DC, Class 2 output. Remote
mounted, 120V input. Max. connected system load,
50W per power supply.
Electrical (continued)
Voltage:120V
Nom. Input Current (Amps): 0.5A@120V
Power Factor: 0.99
Output Voltage (VDC): 24.0±0.5
Min./Max Output Power (W): 0.9/50
Max. Line Ripple (V): ±0.2
Finish
Black
Labels
cULus Listed. Suitable for Dry Locations
5 7/16 in [138 mm]
Mounting Holes
2 3/16 in [56 mm]
12 3/16 in [309 mm]
1 in [25 mm]
5 1/16 in [129 mm]
Mounting Holes
2
3
1
