Lightware MX-FR9 User manual
MX-FR9, MX-FR9R, MX-FR17, MX-FR17R,
MX-FR33L, MX-FR33R, MX-FR65R, MX-FR80R
with MX-CPU2 and MX I/O Boards
User’s Manual
Hybrid Modular Multimedia Matrix
v4.0 31-05-2022
MX-FR Series Modular Matrix Frames – User's Manual 2
Important Safety Instructions
Class I apparatus construction.
This equipment must be used with a mains power system with a
protective earth connection. The third (earth) pin is a safety feature,
do not bypass or disable it. The equipment should be operated only
from the power source indicated on the product.
To disconnect the equipment safely from power, remove the power
cord from the rear of the equipment or from the power source. The
MAINS plug is used as the disconnect device, the disconnect device
shall remain readily operable.
There are no user-serviceable parts inside of the unit. Removal of the
cover will expose dangerous voltages. To avoid personal injury, do not
remove the cover. Do not operate the unit without the cover installed.
The appliance must be safely connected to multimedia systems.
Follow instructions described in this manual.
Replacing the AC fuse
Unplug the AC power cord from the device. Locate the AC fuse on the
rear panel. Replace only the AC fuse as indicated on the rear panel.
Connect the power cord to the switcher and to the AC power source.
Make sure the switcher is working properly.
Ventilation
For the correct ventilation and to avoid overheating, ensure enough
free space around the appliance. Do not cover the appliance, leave the
ventilation holes free and never block or bypass the fans (if there are
any).
WARNING
To prevent injury, the apparatus is recommended to be securely
installation instructions. The apparatus shall not be exposed to
candles, should be placed on the apparatus.
CAUTION AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
Waste Electrical & Electronic Equipment
WEEE
This marking shown on the product or its literature
indicates that it should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle
it responsibly to promote the sustainable reuse of
material resources. Household users should contact
either the retailer where they purchased this product, or their local
for environmentally safe recycling. Business users should contact
their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial
wastes for disposal.
Caution for Boards with Optical Module: Laser product
CAUTION
The device contains a BR1632A button battery, which supplies power
to the clock when the device is not powered on. Danger of explosion
if battery is replaced incorrectly. Replace only with the same or
equivalent type.
WARNING
Do not ingest the battery, Chemical Burn Hazard. This product
swallowed, it can cause severe internal burns in just 2 hours, and can
lead to death. Keep new and used batteries away from children. If the
battery compartment does not close securely, stop using the product
and keep it away from children. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate
medical attention.
INVISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
Radiated wavelengths:
778 nm, 800 nm, 825 nm, 850 nm
Output power <= 1mW
Classified by EN 60825-1:2008
Common Safety Symbols
Symbol Description
Direct current
Alternating current
Protective conductor terminal
On (Power)
Off (Power)
Caution, possibility of electric shock
Caution
Laser radiation
MX-FR Series Modular Matrix Frames – User's Manual 3
Symbol Legend
The following symbols and markings are used in the document:
WARNING!Safety-related information that is highly recommended
to read and keep in every case!
ATTENTION!Useful information to perform a successful procedure;
it is recommended to read.
DIFFERENCE:
INFO:A notice, which may contain additional information. Procedure
can be successful without reading it.
DEFINITION:The short description of a feature or a function.
TIPS AND TRICKS:Ideas that you may have not known yet, but can
be useful.
Navigation Buttons
Go back to the previous page. If you clicked on a link previously,
you can go back to the source page by pressing the button.
Navigate to the Table of Contents.
Step back one page.
Step forward to the next page.
Document Information
Allpresentedfunctions refertotheindicated products.Thedescriptions
have been made while testing these functions in accordance with the
Item Version
Lightware Device Controller (LDC) software 2.5.17b2
Lightware Bootloader Software 3.3.2
3.5.7b8
1.7.2
4.0.0
CPU board hardware v2.2
1.0.8
Motherboard v2.3
Document revision: v4.0
Release date: 31-05-2022
Editor: Tamas Forgacs
About Printing
Lightware Visual Engineering supports green technologies and eco-
friendly mentality. Thus, this document is primarily made for digital
use. If you need to print out a few pages for any reason, follow the
recommended printing settings:
▪Page size: A4
▪Output size: Fit to page or Match page size
▪Orientation: Landscape
TIPS AND TRICKS:Thanks to the size of the original page, a border
around the content (gray on the second picture below) makes it
possible to organize the pages better. After punching holes in the
printed pages, they can easily be placed into a ring folder.
123
MX-FR Series Modular Matrix Frames – User's Manual 4
1. INTRODUCTION................................................................................7
...................................................................................8
........................................................................................8
..............................................................................10
..................................................................11
2. INSTALLATION...............................................................................12
.......................................................................13
........................................................................13
..............................................14
..................................................15
3. PRODUCT OVERVIEW.....................................................................17
...............................................18
............................................................................18
...........................................................18
........................................................18
............................................................... 19
...............................................................................19
............................................................................20
............................................................21
....................................................................................23
....................................................................................25
....................................................................................27
..................................................................................28
......................................................................................29
....................................................................................30
............................................................31
....................................................................... 31
............................................................. 31
............................................................. 31
................................. 32
....................................................................... 33
.............................................................................34
..........................................................................36
4. OPERATION....................................................................................38
................................................................................39
............................................................. 39
..........................40
........................41
................................................41
............................................................................... 41
................................................................... 41
..................................................... 42
................................................................ 42
......................................................................................... 42
.................................................... 44
............................................................................ 44
..................................................................................... 45
.....................................................47
....................................................................................... 47
..............................................................................47
..................................................................... 47
................................................................................. 48
...........................................................................50
..............................51
.................................................... 51
.................................................... 52
....................................................52
.................................................................................. 52
................................................................................... 53
......................................................... 62
....................................................................................... 62
....................................................................... 62
.....................................................................63
.......................................................................... 63
............................................ 64
...................................................................................... 64
....................................................................... 64
......................................................................... 65
.........................................................................65
..................................67
..................................................................68
.....................................................68
..................................................68
SOFTWARE....................................................................................69
.....................................................................70
..........................................................................70
...................71
........................................................................72
.......................................................................................... 72
........................................................................................... 74
....................................................76
........................................................................... 76
.............................................................................. 77
....................................................................... 78
.................................................................... 86
............................................................................................. 91
....................................................................................92
............................................................... 92
.............................................................................. 93
.................................................................. 93
................................................................................ 94
.............................................................................. 94
.............................................................................95
............................................................................ 95
.......................................................................... 96
............................................................................................... 96
.................................................................................................... 97
............................................................................. 98
........................................................................98
7. PROGRAMMER’S REFERENCE.......................................................99
...............................................................100
..................100
.................................................... 100
.........................................................................100
....................................................................... 100
.....................................................................101
................................................................... 101
.......................................................................101
...................................................101
..................................................101
...........................................101
.....................................................101
................................... 101
................................................... 102
................................................. 102
........................................................................102
.................................................................... 102
..........103
..........................103
............................................................ 104
.....................................................104
............................................................ 104
.......................................................... 104
.........................................................104
.....................................................104
Table of Contents
MX-FR Series Modular Matrix Frames – User's Manual 5
............................................................................105
.........................................................................105
............................................................................. 105
...................................................................... 105
...................................................................... 105
................................................................... 105
..................................................105
.................................................. 106
................................................ 106
......................................... 106
...........................................106
........................................106
.............................................107
............................................................... 107
................................................. 107
.........................................107
................................................... 108
..................................................108
......................................................108
.....................................................108
.............................................................. 109
........................................................109
............................................................109
..........................................................109
.................................109
.................................110
.......................................................110
........................... 110
................................................110
.................................... 111
........................................................... 111
.........................................................111
................................................................111
.....................................................................112
..................................................................... 112
................................................................. 112
....................................................................113
...................................................113
....................113
.............................................................114
.............................................114
................................................... 115
............................................115
.................................................. 115
................................. 116
................................................... 116
.............................................116
...........................................117
......................................................... 117
............................................................118
........................................................................... 118
......................................................................... 119
................................................................................119
.................................................................120
...................................................................... 120
........................................................................... 121
..................................................................... 124
........................................................................ 127
.................................................................. 130
............................................................................ 134
............................................................................ 136
.................................................................137
...................................................................... 138
................................................................. 139
.......................................................139
.....................................139
.............................................. 140
.............................................140
................................................ 140
.................................................141
...................................................... 141
...................................................141
.................................................. 142
..................................................... 142
...................................................143
...................................................... 143
...................................................143
.................................................. 144
..................................................... 144
....................................................145
.................................................................. 145
........................................................ 145
..........................................................................145
...................................................146
8. FIRMWARE UPDATE.....................................................................150
.......................................151
...........................................................153
............................................153
....................................................................155
..................................................................................156
......................157
.........................................................................158
...................................................................159
.............................................................. 159
..................................................... 159
..................................................................160
..........................................160
................................................160
....................................................161
...............................................................162
..............................................163
............................................................164
.................................................................................164
..................................................................................... 164
............................................................... 165
.........................................................................165
........................................................ 165
..............................................................166
11. APPENDIX ..................................................................................167
.........................................................................168
......................................................................................... 168
........................................................................................... 168
..................................................................................... 168
................................................ 169
............................................................ 169
......................................................... 170
...................................................................... 171
..................................................................................172
............................................................................... 172
.........................................173
.......................................................173
....................................................................174
Table of Contents
MX-FR Series Modular Matrix Frames – User's Manual 6
Table of Contents
..................................................................175
.................................................................................. 175
..................................................................................175
...................176
.....................................176
.........................................................176
.............................................................186
..........................................................186
.................................................................................... 187
.................................................................................... 187
...................................188
............................................................................188
..........................................................189
.............................................................190
1. Introduction MX-FR Series Modular Matrix Frames – User's Manual 7
1
Introduction
introduce the device, highlighting the most important features in the listed sections below:
ç
ç
ç
ç
1. Introduction MX-FR Series Modular Matrix Frames – User's Manual 8
Description
Thank you for choosing Lightware matrix routers. The hybrid modular matrix routers are capable of routing
more precise switching, control, troubleshooting and signal measurement.
thanks to our Hybrid Modular Design.
The future-proofed matrix backplanes are able to switch to 12.8 Gigabit per second data rates, allowing
transportation of the next generation HDMI, 4K x 2K, 3D and DisplayPort 1.1 video signals. All Input boards
e.g. DVI-I, 3G-SDI, etc. convert their respective Input signals to the widest and broadest standard for all
existing video signals – uncompressed HDMI (including embedded audio). Output boards convert the
Model Denomination
About the Serial Number
Lightware devices contain a label indicating the unique serial number of the product. The structure is the
following:
MX-FR80R
Redundant Power Supply Unit
Frame
Matrix 80x inputs and 80x outputs
7A000941
7=2017
8=2018
9=2019
A=2020
B=2021
C=2022
D=2023
E=2024
F=2025
6-digit running sequence number
Month of the manufacturing:
Year of the manufacturing:
(3-9, A-Y)
1: Jan
2: Feb
3: Mar
4: Apr
5: May
6: Jun
7: Jul
8: Aug
9: Sep
A: Oct
B: Nov
C: Dec
Features
Non-blocking Crosspoint Matrix Architecture
The router allows any input to be switched to any output or more outputs simultaneously.
interfacing with different video sources and displays.
The MX Series supports the highest 4K UHD, 2560x1600 and 1920x1080@120Hz resolutions,
standard HDMI 3D formats and all HDMI 1.3 resolutions, operating without signal latency.
1080p
HDTV
720p, 1080i and 1080p etc. signals are supported with or without HDCP encryption.
3D Support
Lightware provides complex, integrated solutions for the digital age, also delivering 3D
UMX Technology
UMX (Universal MatriX) technology was developed to support various analog and digital
video and audio signal formats with several input connection possibilities.
components can be installed in the same system within the same chassis.
No Signal Latency With Zero Frame Delay
The signal management architecture ensures that there is no delay added between the input
and the output.
1. Introduction MX-FR Series Modular Matrix Frames – User's Manual 9
Advanced EDID Management
The user can emulate any EDID on the inputs independently, read out and store any attached
monitor's EDID in the internal memory locations.
Built-in Cable Compensation
Each DVI, HDMI or SDI input port contains an individual built-in cable extender.
Pixel Accurate Reclocking
Each output has a clean, jitter free signal, eliminating signal instability and distortion caused
Frame Detector and Signal Analysis
The exact video and audio signal format can be determined such as timing, frequencies, scan
mode, HDCP encryption, color range, color space and audio sample rate.
This technology is designed to switch inputs remotely on Lightware signal extenders without
any additional control cabling. The RICOD master device can control the RICOD slave device
connected to its input port.
POWER
5V
+
DVI +5V Power Support
optical cables or other DVI powered devices.
Redundant Power Supply
Accepting AC voltages from 100 to 240 Volts with 50 or 60 Hz line frequency on standard IEC
connector. Redundant hot-swappable PSUs on selected models.
Power Failure Memory
power failure. Every setting is stored in a non-volatile memory.
Front Panel Control
Sources and destinations have their own buttons to be selected. Single switches can be
executed or crosspoint presets can be saved and reloaded. Almost every setting can be
The LDC application keeps receiving updates, adding new features and tools. The LDC is
www
Built-in Website
software is not allowed to be installed.
Ethernet Control
USB Control
RS-232 RS-232 or RS-422 Control
Simple ASCII-based protocol can be used for switching, preset calling, status request, etc.
TPS Cable Diagnostic Tool
The tool within the LDC software will help you identify potential twisted pair cable issues in
your TPS-capable (HDBaseT®-compliant) system.
1. Introduction MX-FR Series Modular Matrix Frames – User's Manual 10
Box Contents
The following table describes all supplied and optional accessories of the MX-FR series matrix switchers by models. The optional (not-supplied) accessories can be purchased separately; please contact [email protected].
Supplied devices Supplied accessories Optional accessories
Safety and
Warranty
Info
Quick
Start
Guide
Matrix router
frame with rack
mounting ears
IEC power cable 1LAN cross-link
cable, CAT5e
type, 3 m length
RS-232 straight
serial cable
Safety and
Power supply
unit(s) 2
MX-CPU2 board 3Router input and
output board(s) 3
48V external PSU
for PoE feature 4
Mounting power
ears (2x)
Phoenix
Combicon 5-pole
connector 5
MX-FR9 - -
MX-FR9R -
MX-FR17 - -
MX-FR17R -
MX-FR33L - -
MX-FR33R
MX-FR65R -
MX-FR80R -
1
2Supplied with matrix routers with redundant PSU.
3
4Default accessory for boards with TPS2 ports and PoE-compatible remote power feature.
5Default accessory for boards with 5-pole Phoenix Analog Audio ports.
1. Introduction MX-FR Series Modular Matrix Frames – User's Manual 11
Integrated System Application (left) and Applying Remote Control
Panels (above)
Typical Applications
2. Installation MX-FR Series Modular Matrix Frames – User's Manual 12
2
Installation
The chapter is about the installation of the device and connecting to other appliances, and also presenting the
mounting options.
ç
ç
ç
ç
2. Installation MX-FR Series Modular Matrix Frames – User's Manual 13
Mounting Options
WARNING!For the correct ventilation and to avoid overheating, ensure enough free space around the
appliance. Do not cover the appliance, leave the ventilation holes free and never block or bypass the
fans.
The front rack ears allow to mount the device as a standard rack unit installation. Use such type (and size)
The dimensions of the frames can be found in the Mechanical Drawings section.
TIPS AND TRICKS:Pay attention to the rear side of the matrix. Leave enough free space to (un)plug the
!
ATTENTION!Fix the frame to the rack rail using all mounting holes. Choose properly sized screws for
mounting. Keep minimum of two threads left after the nut screw.
Frame type The number of the mounting holes
MX-FR9, MX-FR9R 2x4 pcs.
MX-FR17, MX-FR17R
MX-FR33L, MX-FR33R
2x6 pcs.MX-FR65R
MX-FR80R
Connecting Steps
powered off devices is recommended.
Power
Connect the power cord to the AC power socket and to the matrix. It is recommended to power
the devices on as the last step.
Software Control
– Lightware Device Controller Software section.
section.
CATx
DVI
HDMI
VGA
Audio
LAN
RS-232
USB
2. Installation MX-FR Series Modular Matrix Frames – User's Manual 14
WARNING!The I/O boards and the CPU board are not hot-swappable. The matrix must be powered off
before removing/inserting a board.
Important Notices about the Boards
motherboard in the matrix, thus they have dedicated slots as indicated in the rear plate. In general:
▪CPU board is always placed in the uppermost position.
▪Output boards are located below the CPU board.
▪Input boards are located in the bottom slots.
Installing a Board
Step 1. Make sure the matrix is powered off.
Step 2.
CPU
Step 3. Take the board by touching the metal plate only, to prevent ESD-caused problems.
Step 4. Insert the edge of the board in the slot at both sides.
8CH OUTPUT BOARD FOR HDMI WITH 3D AND ANALOG AUDIO
MX-HDMI-3D-OB-A
OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8
CPU
8CH OUTPUT BOARD FOR HDMI WITH 3D AND ANALOG AUDIO
MX-HDMI-3D-OB-A
OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8
2. Installation MX-FR Series Modular Matrix Frames – User's Manual 15
Step 5. Gently push the board in until it stops, then press the plate at the indicated places at once. Thus, the
connector of the board and the motherboard will be put together.
Step 6.
INFO:
series.) E.g. if an MX-TPS-IB had been installed previously in a matrix and an MX-TPS-IB-A board was
installed later, the previous settings would be applied to the board.
CPU
8CH OUTPUT BOARD FOR HDMI WITH 3D AND ANALOG AUDIO
MX-HDMI-3D-OB-A
OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8
MX-FR80R and MX-FR65R Frames
The PSU of these frames is hot-swappable, thus you do not have to switch off the matrix to replace or install
a PSU.
best practice for a PSU replacement is to have two PSUs in use continuously. Thus, the third PSU can be
replaced safely:
Step 1. Unplug the power cord from the AC socket, then from the desired PSU.
Step 2. Loosen the xing screw
#power #redundancy
2. Installation MX-FR Series Modular Matrix Frames – User's Manual 16
Step 3. Pull down the lever (1), then pull out (2
Step 4. To install another PSU: insert the unit in the slot, and push it until it stops.
Step 5.
Step 6. Plug the power cord to the PSU, then to the AC socket.
MX-FR33R Frame
Two types of PSUs exist for MX-FR33R frames. Both can supply the frame, but the two units are not
interchangeable with each other. See more details in the Redundant Power Supplies section.
ATTENTION!The MX-PSU-350 type is hot-swappable, thus you do not have to turn off the matrix to replace
a PSU. Former type of PSUs do not support this feature.
The MX-PSU-350
Step 1. Switch off the desired PSU (1) and unplug the power cord from the AC socket
Step 2. 2) from the PSU and pull out the power cord.
Step 3. 3), then pull out the PSU.
Step 4. Insert the new PSU, push it until it stops.
Step 5.
3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 17
3
Product Overview
The following sections are about the physical structure of the device, input/output ports and connectors:
ç
ç
ç
ç
ç
ç
ç
çMX-FR33R
çMX-FR33L
çMX-FR17
çMX-FR17R
çMX-FR9
çMX-FR9R
ç
ç
ç
3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 18
transmission. The hybrid architecture allows signal routing between boards even if they have different
connectors. This way any input can be routed to any one or more outputs if the output interface is capable
of transmitting the signal. For example, a DVI source can be routed to an HDMI sink, but HDCP-encrypted
sources cannot be routed to non-HDCP capable DVI sinks.
Router Frames
boards are available that can be mixed in the same frame without limitation.
Frame type Rack height Max. input
boards
Max. input
ports
Max. output
boards
Max. output
ports
MX-FR9 4U 1 9 1 9
MX-FR9R 4U 1 9 1 9
MX-FR17 4U 2 17 2 17
MX-FR17R 4U 2 17 2 17
MX-FR33L 6U 4 33 4 33
MX-FR33R 7U 4 33 4 33
MX-FR65R 15U 8 65 8 65
MX-FR80R 15U 10 80 10 80
INFO:The maximum number of input and output ports includes the Test input and Preview output port of
the MX-CPU2 processor board.
an MX-TPS-IB had been installed previously in a matrix and an MX-TPS-IB-A board was installed later, the
previous settings would be applied to the board.
MX-CPU2 Processor Board
The CPU board is necessary for the router frame to work. This board is responsible for controlling the matrix
and storing the settings.
Test Input and Preview Output Ports
The MX-CPU2 board has a TEST INPUT and a PREVIEW OUTPUT port. Although these ports have special
MX-FR80R and MX-FR65R
Used in the MX-FR80R (and MX-FR65R) router frame, the Preview output is directly connected to the 80th
output port with a DVI splitter. Therefore this port always outputs the same signal as the 80th output (the 8th
port of the 10th output board), even if it uses a different interface (TP, OPT, etc.).
The 80th input port of the crosspoint is multiplexed between the Test input port and the 8th port of the 10th
input board. This switch is independent from the crosspoint state. The selected port (Test input or Input
board #10) will be available as the 80th input on the crosspoint switch.
Other Frames
All other frames use the Test input and Preview output just like any other ports. These ports are referred to
as the last port in the crosspoint.
Frame Type Test Input Preview Output
MX-FR9 in 9 out 9
MX-FR9R in 9 out 9
MX-FR17 in 17 out 17
MX-FR17R in 17 out 17
MX-FR33L in 33 out 33
MX-FR33R in 33 out 33
MX-FR65R in 80 out 80
MX-FR80R multiplexed in 80 distributed out 80
Other Connectors
The MX-CPU2 board has Ethernet, serial, and alarm ports as well.
3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 19
MX-FR65R Limitations
The MX-FR65R matrix frame is physically identical to the MX-FR80R.
MX-FR65R allows only 8.
The frame has 10 physical board slots, but will not boot up when more
than 8 input or output boards are inserted. Only the number of the
boards is limited, thus they can be used in any of the physical slots.
However, to gain exclusive access to the Test input and Preview output
ports on the MX-CPU2, it is recommended to leave the last slot empty.
For example, if the input slot #1 is empty, there can be 8 input boards
in slots #2 to #9 and the slot #10 left empty. In this case the 65 input
ports can be accessed with port numbers 9-72 and 80.
MX-CPU2 Board Features
modular matrix routers:
Older models New models
MX16x16DVI-Pro
MX32x32DVI-Pro
MX32x32HDMI-Pro
MX16x16HDMI-Pro
MX32x32DVI-HDCP-Pro
MX16x16DVI-HDCP-Pro
MX-DVI-FR16
MX-DVI-FR32
MX-DVI-FR32R
MX-FR9
MX-FR9R
MX-FR17
MX-FR17R
MX-FR33(L)
MX-FR33R
MX-FR65R
MX-FR80R
All older models can be updated with the MX-CPU2 processor board.
Changes with MX-CPU2 update
▪Extra I/O ports – Get an additional DVI-HDCP input and output
port.
▪Ethernet control
connections.
▪Combine HDCP and non-HDCP boards – Any interface board
combination is possible in the same frame.
Input Boards
Several input interface boards are available. Each model has different capabilities and functions. Below table shows a summary of the main features.
Model Default connectors Optional connectors
Capability
Capability
EDID
Emulation
MX-DVID-IB 8x DVI-I (D) 1- - -
MX-DVI-4K-IB 8x DVI-I (D) 1-
MX-DVI-TP-IB - - - - üü
MX-DVI-TP-IB+ - - -
MX-DVI-OPT-IB-… 8x optical - - - - -
MX-DVIDL-IB 4x DVI-I (D) (dual link) - - -
MX-DVIDL-OPT-IB-… 4x optical (dual link) - - - - -
MX-DVI-HDCP-IB 8x DVI-I (D) 1-
MX-DVII-HDCP-IB 8x DVI-I - 2
MXD-UMX-IB 8x DVI-I 2
MX-HDMI-IB 8x HDMI -
MX-HDMI-TP-IB -
MXD-HDMI-TP-IB
MX-HDMI-OPT-IB-… 8x optical - - -
MX-3GSDI-IB -- -
MX-CPU2 Test Input 1x DVI-I (D) 1--
MX-TPS-IB, -A, -S 8x TPS 3
MX-HDMI-3D-IB, -A, -S 8x HDMI 3
MX-TPS2-IB-P, -AP, -SP 8x TPS 3
MX-4TPS2-4HDMI-IB, -A,- S 4x TPS, 4x HDMI 3
MX-4TPS2-4HDMI-IB-P, -AP, -SP 4x TPS 4, 4x HDMI 3
1Any DVI connector can be plugged in, but only digital pins are connected.
2
3TM on the TPS ports.
4
3. Product Overview MX-FR Series Modular Matrix Frames – User's Manual 20
Output Boards
Several output interface boards are available. Each model has different capabilities and functions. The table below shows a summary of the main features.
Model Deafult connectors Optional Connectors
Capability
Capability
EDID
Reading Re-clocking
MX-DVID-OB 8x DVI-I (D) 1- - -
MX-DVI-4K-OB 8x DVI-I (D) 1-
MX-DVI-TP-OB - - - -
MX-DVI-TP-OB+ - - -
MX-DVI-OPT-OB-… 8x optical - - - - -
MX-DVIDL-OPT-OB... 4x optical (dual link) - - - - -
MX-DVI-OPT-OB-R-… 8x optical - - - -
MX-DVIDL-OB 4x DVI-I (D) (dual link) 1- - -
MX-DVI-HDCP-OB 8x DVI-I (D) 1-
MX-HDMI-OB -
MX-HDMI-TP-OB -
MXD-HDMI-TP-OB
MX-HDMI-OPT-OB-… 8x optical - -
MX-CPU2 Preview Out 1x DVI-I (D) 1-
MX-HDMI-3D-OB, -A, -S 8x HDMI
MX-HDMI-OPT-OB-R-… 8x optical -
MX-TPS-OB, -A, -S 8x TPS
MX-TPS2-OB-P, -AP, -SP 8x TPS 2
MX-AUDIO-OB-A 8x Phoenix -
MX-4TPS2-4HDMI-OB, -A, -S 4x TPS, 4x HDMI
MX-4TPS-4HDMI-OB-P, -AP, -SP 4x TPS, 4x HDMI
1Any DVI connector can be plugged in, but only digital pins are connected.
2
WARNING!
Other manuals for MX-FR9
1
This manual suits for next models
7
Table of contents
Other Lightware Controllers manuals
Popular Controllers manuals by other brands
Munters
Munters TRIO User and installation manual
gefran
gefran GTF-Xtra Installation and operation manual
NXP Semiconductors
NXP Semiconductors MC9328MX1 Setup and use
PDC spas
PDC spas Accent Operation guide
Raven
Raven AccuBoom Calibration & Operation Manual
GRAIGAR
GRAIGAR A.V.R. R220 Installation and Maintenance