Ligneus Junior Ladder 1190 x 375 x 110 User Instructions For more information visit https://ligneus.co.uk/pikler-inspired
Independently Tested to EN71-1, 2, 3 & 8 Ligneus Products Ltd. Hangar 107, Aston Down Business Park, Stroud Gloucestershire. GL6 8GA
Assembly instructions:
Please refer to diagrams overleaf
1. The Junior Ladder should be assembled by a competent adult
2. Lay one leg flat on the floor
3. Insert a rung into each recess
4. With all rungs vertical, place the other leg on top, align and fit rungs
into each recess
5. Ensuring correct alignment insert M6x30 bolts and finger tighten into
the embedded female threads
6. Carefully turn over and repeat step 5 on the other side
7. When all rungs are seated correctly tighten with the supplied Allen
key
Do contact us if you are unsure of the assembly instructions
We recommend keeping these assembly instructions in a
safe place for future reference. You can also scan the QR
code for an electronic copy
Warnings:
•The recommended minimum age for the Ladder 10months+
•The maximum number of users at any one time is 2
•The maximum weight per user is 50kg (∴max 100kg)
•The Ladder is for indoor use –it can be used outdoors with care
Recommendations:
•Adult assembly & supervision recommended at all times
•The Ladder should be positioned at least 2m from any structure
that could cause an obstruction
•The Ladder should not be installed over any hard surface
•Take care with orientation! Where there may be exposure to the
sun, glare can impede climbing
Maintenance:
•Regular checks should be carried out before and during use to
ensure safe use of ladders
•These checks include:
oNuts & bolts (inspect & tighten as appropriate)
oVisual inspection for any evidence of deterioration
•Replace defective parts as per manufacturer’s instructions
•A wipe over with a damp cloth after use will help maintain the
ladder in good order
•Failure to carry out checks & maintenance may result in products
overturning or becoming hazards
