MPN: LPKTRI-N1-PR Ligneus Nursery Rainbow Climbing Triangle 600 x 650 x 575 GTIN: 5060632681447
For more information visit https://ligneus.co.uk/pikler-inspired
Assembly instructions:
i) Lay one short leg on the floor.
ii) Insert a rung into each recess.
iii) With all rungs vertical, place the other short leg on top, align
and fit into each recess.
iv) Ensuring correct alignment insert M6x30 bolts and finger
tighten.
v) Carefully turn over and repeat step iv on the other side.
vi) When all rungs are seated correctly tighten with the supplied
Allen key.
vii) Repeat steps I to vi with the long legs
viii) Hold up the 2 sides to form the basis of the triangle
ix) Attach the 2 triangle fixing plates to either side of your formed
triangle using the male & female threads supplied –female
threads on the inside (Each short leg already have an
embedded female thread for the quick release handles)
x) You will find the short leg now pivots. These can be secured in
place with the quick release handles
Scan QR code for an electronic copy of the assembly instructions
