Ligneus Nursery Triangle 600 x 706 x 517 User Instructions For more information visit https://ligneus.co.uk/pikler-inspired
Independently Tested to EN71-1, 2, 3 & 8 Ligneus Products Ltd. Hangar 107, Aston Down Business Park, Stroud Gloucestershire. GL6 8GA
Assembly instructions:
Please refer to diagrams overleaf
1. The climbing triangle should be assembled by a competent adult
2. Lay one short leg flat on the floor
3. Insert a rung into each recess
4. With all rungs vertical, place the other short leg on top, align and fit
into each recess
5. Ensuring correct alignment insert M6x30 bolts and finger tighten
into the embedded female threads
6. Carefully turn over and repeat step iv on the other side.
7. When all rungs are seated correctly tighten with the supplied Allen
key
8. Repeat steps I to vi with the long legs
9. Attach the 2 triangle fixing plates to either side of the long leg
frame using 2 of the supplied bolts on each side
10. The short leg frame can now be attached using 1 bolt on either side
in the higher fixing position.
11. You will find the short leg frame now pivots. This can be secured in
place with the quick release handles in the lower fixing position
Do contact us if you are unsure of the assembly instructions
We recommend keeping these assembly instructions in a
safe place for future reference. You can also scan the QR
code for an electronic copy
Warnings:
•The recommended minimum age for the climbing triangle and
add-ons is 10months+
•The maximum number of users at any one time is 2
•The maximum weight per user is 50kg (∴max 100kg)
•The climbing triangle is for indoor use –it can be used outside with
care
Recommendations:
•The climbing triangle should be positioned at least 2m from any
structure that could cause an obstruction
•The climbing triangle should not be installed over any hard surface
•Take care with orientation! Where there may be exposure to the
sun, glare can impede climbing
•Use only manufacturer approved accessories
Maintenance:
•Regular checks should be carried out before and during use to
ensure safe use of triangle
•These checks include:
oNuts & bolts (inspect & tighten as appropriate)
oVisual inspection for any evidence of deterioration
•Replace defective parts as per manufacturer’s instructions
•A wipe over with a damp cloth after use will help maintain the
climbing triangle in good order
•Failure to carry out checks & maintenance may result in products
overturning or becoming hazards
