Ligneus Nursery Arch 600 x 810 x 323 User Instructions For more information visit https://ligneus.co.uk/pikler-inspired
Independently Tested to EN71-1, 2, 3 & 8 Ligneus Products Ltd. Hangar 107, Aston Down Business Park, Stroud Gloucestershire. GL6 8GA
Assembly instructions:
Please refer to diagrams overleaf
1. The climbing arch should be assembled by a competent adult
2. Lay one side flat on the floor.
3. Insert a rung into each recess.
4. With all rungs vertical, place the other side on top, align and fit
into each recess.
5. Ensuring correct alignment insert M6x30 bolts and finger tighten
into the embedded female threads.
6. Carefully turn the arch over and repeat step 4. on the other side.
7. When all rungs are seated correctly tighten with the supplied
Allen key.
Warnings:
•The recommended minimum age for the climbing arch and add-ons
is 10months+
•The maximum number of users at any one time is 2
•The maximum weight per user is 50kg (∴max 100kg)
•The climbing arch is for indoor use –it can be used outdoors with
care
Do contact us if you are unsure of the assembly instructions
We recommend keeping these assembly instructions in a
safe place for future reference. You can also scan the QR
code for an electronic copy
Recommendations:
•The climbing arch should be positioned at least 2m from any
structure that could cause an obstruction
•The climbing arch should not be installed over any hard surface
•Take care with orientation! Where there may be exposure to the
sun, glare can impede climbing
•When being used as a rocker children should grab the handholds
to keep little fingers off the floor and avoid being pinched
underneath
•Use only manufacturer approved accessories
Maintenance:
•Regular checks should be carried out before and during use to
ensure safe use of arch
•These checks include:
oNuts & bolts (inspect & tighten as appropriate)
oVisual inspection for any evidence of deterioration
•Replace defective parts as per manufacturer’s instructions
•A wipe over with a damp cloth after use will help maintain the
climbing triangle in good order
•Failure to carry out checks & maintenance may result in products
overturning or becoming hazards
