AC100 ~ 240V
RESOLUTION CAMERA
Instruction
DAY&NIGHT SUPERHIGH
66-CMG158CSE-1
FEATURES
DAY&NIGHT
Accepts 850nm peak wavelength infrared light sources enabling Day&Night
surveillance.
SENSITIVITY
This is a highly sensitive camera with minimum scene illumination, ensuring good
quality images in low light environments.
ELECTRONIC SHUTTER
When using manual or fixed iris lenses, the electronic shutter function controls the
amount of light captured by the CCD by altering the shutter speed between
1/50(1/60)~100,000 of a second.
BACK LIGHT COMPENSATION
Subjects lit from behind can be automatically enhanced through DSP control of the
iris and shutter speeds, compensating for poorly illuminated scenes.
APERTURE CORRECTION
Refining captured image outlines for a sharper video image.
ATW (Auto Tracking White balance)
Automatically tracks the changes in the color temperature, and adjusts the white
balance. The color temperature ranging from 2000K to 18000K.
ACCEPTS DC DRIVE AUTO IRIS LENS
DC Auto Iris lens can be used.
AUDIO OUTPUT
Built-in highly sensitive capacitive microphone allows setting up of audio
monitoring system.
FOCAL LENGTH ADJUSTMENT RING
Use this ring to adjusts the back-focal distance or picture focus.
PART DESCRIPTION
DAY NIGHT
DAY NIGHT
12
VIDEO
AES
AGC
AC24V / DC12V
POWER
IRIS LEVEL
OFF
OFF AUDIO
VIDEO
AES
AGC
DC12V
POWER
IRIS LEVEL
OFF
OFF AUDIO
VIDEO
AES
AGC
POWER
IRIS LEVEL
OFF
OFF AUDIO
13 14
CMG152
CMG156 CMG158
LENS MOUNT CAP
Prevent damages to the image sensor and to keep dust away.
FOCAL LENGTHADJUSTMENT RING AND LOCKING SCREW
Use this ring to adjusts the back-focal distance or picture focus. Rotate this ring
clockwise or counterclockwise for a CS-mount lens.
Use the locking screw to lock the focal length.
CAMERA MOUNTING BRACKET
The mounting bracket mounted underneath the main body can be mounted to
either the top or bottom of the camera using the attached screws(M2.6x5.0).
MICROPHONE
Built-in highly sensitive capacitive microphone.
AUTO IRIS CONNECTOR(4PIN SOCKET)
Supplies power and control signals to an auto iris lens (jack not supplied).
POWER LED
Power ON/OFF indicator.
AUDIO OUTPUT RCA CONNECTOR
Audio signal output.
VIDEO OUTPUT CONNECTOR
Composite video signal output.
IRIS LEVELADJUSTMENT VARIABLE RESISTOR
Adjusts the signal level when Direct drive(DC) type auto iris lens in use.
AGC (AUTOMATIC GAIN CONTROL) SWITCH
The AGC function automatically adjusts picture gain in accordance with the
brightness of the subject.
AGC: Gain is increased or decreased from Min. To Max. Automatically.
OFF: Deactivation.
AES (AUTOMATIC ELECTRONIC SHUTTER) SWITCH
When using a manual iris or fixed iris lens, set this switch to AES. Switching
the switch to the OFF while the auto iris lens in use.
DC12V INPUT JACK
DC12V power input.
AC24V/DC12V COMPATIBLE INPUT TERMINAL
AC24V(AC24V 10%) or DC12V(DC12V 10%, Non-Polarity input) power
input.
AC INPUT
AC(AC100~240V) power input.
(DC12V 10%)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
INSTALLATION
SUITABLE LENSES
ThelensmustbeeitheraCorCSmount type. The protrusion behind the
mounting surface must be within the following limits:
C - mount lens CS - mount lens
9mmorless 4mmorless
