Liliputi Buckle Carrier User manual

INSTRUCTION MANUAL
BUCKLE CARRIER
Babywearing in Style
Liliputi_CsatosHord_EN_FIN_jav.indd 1 19/07/19 20:25

Congratulations on the arrival of
your baby! We hope both of you
will nd a lot of joy in using
the Liliputi buckle carrier.
Babywearing is benecial for your
baby's development. However,
using the carrier comes with rules
and risks. Therefore, please make
sure to read the user manual prior
to trying this carrier.
2BUCKLE CARRIER – Instruction Manual
Liliputi_CsatosHord_EN_FIN_jav.indd 2 19/07/19 20:25

3
What You Need to Know About the Liliputi Buckle Carrier
WHAT YOU NEED TO
KNOW ABOUT THE LILIPUTI
BUCKLE CARRIER
Baby weight range: 3.5-20 kg
With attached newborn insert, which we recommend
for wearing your newborn occasionally.
The bio-cotton inner lining of the carrier, and all fabric surfaces
which come into direct contact with your baby's skin,
have GOTS or OEKO-TEX® certi cation.
Suitable for front and back carry.
Machine washable (30°C), do not use softener. Washing bag
is recommended because of the buckles.
KNOW ABOUT THE LILIPUTI
With attached newborn insert, which we recommend
The bio-cotton inner lining of the carrier, and all fabric surfaces
which come into direct contact with your baby's skin,
kg
BIO
+
30°
Liliputi_CsatosHord_EN_FIN_jav.indd 3 19/07/19 20:25

4BUCKLE CARRIER – Instruction Manual
GENERAL INFORMATION
ABOUT BABYWEARING
Make sure baby is facing you at all times, never face them forward!
Pull the shoulderstarps tight enough to make sure your chests meet.
After fastening the buckles, make sure that when you get moving, your
baby does not fall away from you but moves with you.
It's important to  nd the anatomically correct position for your baby
in the carrier (the so called physiological posture). This means that your
baby's tights are spreaded slightly, they are horizontally embracing your
upper body, ensuring the least physical stress to their body. Check the
width of the carrier every now and then and adjust it wider if necessary.
Until your baby cannot fully support their upper body, adjust the carri-
er's height so that it supports the baby up to their shoulders.
➽
➽
➽
If you are unsure about babywearing, contact a babywearing consultant,
read our detailed manuals, and watch the video guides on our website.
Liliputi_CsatosHord_EN_FIN_jav.indd 4 19/07/19 20:25

5
Basic Information About Babywearing
➽
➽
➽
➽
➽
➽
➽
➽
The carrier must support your baby's legs
knee to knee.
There has to be a space wide enough for your two  ngers between
your baby's chest and chin.
Always check that your
child can breath freely at all times
, with their
nose and mouth unobstructed.
Never wear the carrier while you are
doing any sports
(running, skiing,
cycling, etc.)
or driving.
Never
unbuckle the waist strap
while your baby is in the carrier, and
always use the waistband safety rubber.
If your baby is wearing a babygrow in the carrier, make sure that the
babygrow is loose enough for them to pull up their legs comfortably.
If you have just started babywearing, it is absolutely normal that your
little one cries sometimes. There are many reasons for this, for instance
initial insecurity and the unfamiliar situation. However, it is important to
double-check the baby has no other complaints
(e.g. hunger,
sleepiness, uncomfortable clothing, etc.)
For infants with a low birth weight and children with unusual
development rates, it is important to obtain advice from a medical
professional and carrying consultant (trained to deal with special
cases) before using this product.
(running, skiing,
while your baby is in the carrier, and
If your baby is wearing a babygrow in the carrier, make sure that the
babygrow is loose enough for them to pull up their legs comfortably.
If you have just started babywearing, it is absolutely normal that your
little one cries sometimes. There are many reasons for this, for instance
initial insecurity and the unfamiliar situation. However, it is important to
(e.g. hunger,
development rates, it is important to obtain advice from a medical
Liliputi_CsatosHord_EN_FIN_jav.indd 5 19/07/19 20:25

BEFORE YOU TRY
YOUR CARRIER
6BUCKLE CARRIER – Instruction Manual
chest strapsleeping hood
plastic locker
infant insert
snap
shoulder strap
body
body height
adjuster
sleeping hood
zipper
seat extender
waist strap
Liliputi_CsatosHord_EN_FIN_jav.indd 6 19/07/19 20:25

1
2
The carrier's height can be adjusted
by pulling on the strings
and fastening them with the plastic
cord lock on the two side panels.
HEIGHT OF THE CARRIER
7
Height of the Carrier
SETTING THE
PROPER HEIGHT OF
THE CARRIER:
➽
For newborns:
up to the middle of
their ears.
➽
For children able
to support their
own upper body by
themselves: up to the
shoulder line.
➽
For bigger children:
at least up to their
armpits
1 2
Liliputi_CsatosHord_EN_FIN_jav.indd 7 19/07/19 20:25

1
2
1
2
The position of the chest strap is
The position of the chest strap is
adjustable on the harness of the
adjustable on the harness of the
shoulderstrap. For front wearing,
shoulderstrap. For front wearing,
slide the chest strap up near the
slide the chest strap up near the
top of the shoulderstrap, and for
top of the shoulderstrap, and for
backcarry, slide it downwards.
The chest strap can be pulled
to the right size after fastening
the buckle.
Zip up the extender on both
sides of the carrier.
Slip the extender through
the waist belt.
For bigger babies you might need
to attach the seat extender so that
the carrier supports your baby
from knee to knee.
ADJUSTING THE
ADJUSTING THE
CHEST STRAP
CHEST STRAP
SEAT EXTENDER
1 2
1 2
8BUCKLE CARRIER – Instruction Manual
Liliputi_CsatosHord_EN_FIN_jav.indd 8 19/07/19 20:25

1
2
3
Place the loosened and unbuckled
waist belt on your waist or hip,
depending on where you want to
carry your baby.
Bring the buckle through the safety
rubber ring, and then connect it to
the other side of the buckle. If you can
hear a "click" it is attached properly.
Adjust the long strap to the right size.
The waist strap needs to circle your
torso horizontally. Slip any loose
end into the plastic holder on the
waist belt.
FASTENING THE
WAIST STRAP
2
1
3
2
9
Seat Extender, Chest Strap, Waist Strap
Liliputi_CsatosHord_EN_FIN_jav.indd 9 19/07/19 20:25

1
2
3
Hold one of the loops secured to the corners of the hood.
Lift the hood to your baby's head and slip the loop into the plastic
locker on the shoulder strap. Repeat on the other side.
The hood can be taken in in the sides with the pulling cords.
Use the sleeping hood while your baby is sleeping.
SLEEPING HOOD
1 2 3
10 BUCKLE CARRIER – Instruction Manual
Liliputi_CsatosHord_EN_FIN_jav.indd 10 19/07/19 20:25

1
2
3
Velcro the insert into the pocket of
the carrier's inner lining.
Slip the straps of the newborn insert
into the loop on the top of the carrier
on both sides.
Fasten the snaps on both sides.
As part of the carrier we send you a
detachable infant insert, which makes it
possible to carry your newborn baby.
SECURING / REMOVING
THE INFANT INSERT
11
Sleeping Hood, Infant Insert
1
3
2
Liliputi_CsatosHord_EN_FIN_jav.indd 11 19/07/19 20:25

We recommend this type of newborn
wearing occasionally only. For daily
use with longer periods of carrying,
we recommend our woven wraps,
stretchy wraps or Lili Tai carriers
for newborns, and only the woven
wraps and ring slings for premature
babies.
12 BUCKLE CARRIER – Instruction Manual
FRONT
CARRY
WITH
INFANTS
Liliputi_CsatosHord_EN_FIN_jav.indd 12 19/07/19 20:25

1
2
3
4
5
6
7
8
Adjust the chest belt so that you can reach
it comfortably on your back, too.
Sit down rst, so that you can put your
newborn into the insert safely. Spread the
carrier on your lap. Undo one of the infant
insert's upper snaps.
Lay your baby on your lap so you can slip
their legs between the infant insert and the
body of the carrier.
Snap both snaps back, secure the insert in
place.
Put the shoulder straps on your shoulders,
thus lifting your baby on your chest.
Adjust the shoulder straps so that they are
tight enough and comfortable.
Buckle the cheststrap behind your shoulders.
Check the height, tightness, buckles and
position of you baby's legs, and make sure
that your infant can easily breathe.
13
Front Carry with Infants
1 2
34
56
78
FYI: Check out the videos on our website for a detailed
demonstration of the various carrying options.
Liliputi_CsatosHord_EN_FIN_jav.indd 13 19/07/19 20:25

We recommend this way of
carrying until it's comfortable for
both of you, if you nd the baby
too heavy to carry on the front,
or the baby's head is too high,
switch to back carry.
14 BUCKLE CARRIER – Instruction Manual
FRONT
CARRY
Liliputi_CsatosHord_EN_FIN_jav.indd 14 19/07/19 20:25

1
2
3
4
5
6
7
Attach the carrier to your waist, and use
the safety rubber ring. Make sure the
waistband is always high enough for you to
move your head freely regardless of your
baby's position.
Adjust the chest strap to a height where you
can reach it comfortably on your back, too.
Put on one shoulder strap on one arm.
Use one hand to support the child, and the
other to spread the legs and place the baby
to the middle of the carrier.
Put on the other shoulder strap as well.
Buckle the chest belt.
Adjust the shoulder straps so that your
child is comfortable and close to your body
by pulling the beltings on both sides.
Adjust the shoulder straps so they are
a tight but comfortable t.
15
Front Carry
1 2
34
56
7
FYI: Check out the videos on our website for a detailed
demonstration of the various carrying options.
Liliputi_CsatosHord_EN_FIN_jav.indd 15 19/07/19 20:25

1
2
Place your baby on your hip, while holding the back, and spread the legs
into a small straddle. Pull up the body of the carrier on your baby's back.
Make sure that you hold your baby's bottom with your other arm during
the whole process.
With your free hand, reach over in front of your baby's chest and and hold
the shoulder straps tightly together under your baby's chin. Meanwhile,
We recommend this technique
for babies who can support their
upper bodies by themselves.
16 BUCKLE CARRIER – Instruction Manual
BACK
CARRY
Attach the carrier to your waist and use the safety rubber rings.
Rotate the carrier to one of you sides.
Liliputi_CsatosHord_EN_FIN_jav.indd 16 19/07/19 20:25

3
4
5
6
7
8
holding the baby's bottom to assist rotation,
bring the child carefully to your back by doing
small side and back-and-forth tilts. Hold the
shoulder straps tightly during the whole process.
Once your baby is on your back, slip one of
your arms, the one which is closer to the baby,
into the shoulder strap.
Carefully, still leaning forward a little and
holding your baby during the whole time, put
your other arm through the other shoulder
strap and bring your baby to the middle.
Adjust the shoulder straps so they are a tight
but comfortable t.
Adjust the waist belt. Use the safety rings
of the straps for the perfect t of the buckles.
Slip the hanging end into the plastic holder on
the waist belt.
Buckle in and adjust the chest belt.
Check the height, tightness, buckles and
position of you baby's legs.
You can try buckling up the carrier rst without the baby,
using a soft toy, then with your baby over the bed. Trust us,
you'll soon get the hang of it!very soon!
17
Back Carry
1 2
3 4
56
7 8
Liliputi_CsatosHord_EN_FIN_jav.indd 17 19/07/19 20:25

Organic cotton drool pad, which really comes
handy when your baby's favourite teething
toy is your carrier's strap.
Soft, fl exible stretchy wrap, made of GOTS/
OEKO - TEX® biocotton material. Specially
made for newborns; front carry, up to 9 kg.
DROOL PAD
STRETCHY WRAP
18 BUCKLE CARRIER – Instruction Manual
OTHER COOL STUFF
FROM LILIPUTI
Liliputi_CsatosHord_EN_FIN_jav.indd 18 19/07/19 20:25

Mei Tai type of carrier, made of 100% GOTS
biocotton diamond weave fabric which combines
the advantages of a woven wrap and a buckled
carrier. From newborn weight up to 15 kgs.
Our Ring Sling is made of 100% biocotton
diamond weave fabric which provides
continuous support for your baby's back.
Easy to use for front and hip carry, for kids
of all ages, even for premature babies.
The 100% GOTS bio-cotton wrap made
of diamond weave fabric provides a strong,
continuous support for your baby's back.
For front, back, and hip carry, for kids of all
ages, even for premature babies.
LILI-TAI
RING-SLING
WOVEN WRAP
19
Discover on liliputi.com
Liliputi_CsatosHord_EN_FIN_jav.indd 19 19/07/19 20:25

The 4 in1 Liliputi mama coat is made of premium quality softshell material.
It can be worn as a pregnancy jacket, for front or back babywearing, or as
a regular coat. With this you can get away from dressing up the baby from
head to toe during a winter walk, because your body's temperature will keep
the baby warm enough under the coat. Our mama jacket is a real favourite,
because it is extremely durable, timeless, and can be one of the basics of
your winter wardrobe.
4IN1 MAMA COAT
20 BUCKLE CARRIER – Instruction Manual
Liliputi_CsatosHord_EN_FIN_jav.indd 20 19/07/19 20:25