Link electronics DigiFlex 1170 User manual

1000 SERIES DIGIFLEX
Mounting Frame Options
1000 - Single Power Supply, Holds 11 Modules
1000/2 - Dual Power Supply, Holds 10 Modules
7200 - Mounting Frame, Holds 1 Module
LINK ELECTRONICS, INC.
SDI DISTRIBUTION AMPLIFIER 1 X 8
DigiFlex 1170/1171
FEATURES
Accepts All Standards
Serial Digital Input
Eight Serial Outputs
Re-Shaped
Equalized
Fault Indication
The LINK 1170/1171 DigiFlex serial digital (SDI)
video distribution amplifier restores the incoming
signal to its proper amplitude. The signal is
reshaped with automatic equalization, re-sliced
and DC restored. Eight outputs are provided on a
removable rear cell. A module fault LED on the
front edge of the module indicates that the input
signal level is below a pre-set threshold. This
thresholdmaybeadjustedtosuittheusersneeds.
A second module fault LED is located on the rear
cell and is therefore visible from the back of the
equipment rack.
ArearI/Omodulemustbeselected forthespecific
front signal module. The signal module and rear
I/O module, with the flexibility of the frame, place
virtually no limits on the versatility of the DigiFlex
1000 system.
The 1170 and 1171 accepts composite 143 Mb/s
and 177Mb/s, component 270Mb/s, and 16:9
aspect ratio 360Mb/s standards. The module is
transparent to the incoming signal data rate. The
1171 output level can be user adjusted between
600mVand 1100 mV. The 1170hasa fixed output
level of 800mV.
The 1000 series DigiFlex modules are compact
designs that allow eleven modules to mount in the
1000 frame or ten modules with a redundant
power supply. Any DigiFlex series modules will
operate in the 1000 frame in any configuration,
digital or analog, video or audio. The 1000 system
is well suited for small or large systems. The
productisbacked by aten-yearwarrantyincluding
parts and labor.
LINKELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668
Phone [phone] FAX [phone]
MADE IN THE USA

1070/1071
REARCELL
Rear Cell I/O
0. Input
1. Output
2. Output
3. Output
4. Output
5. Output
6. Output
7. Output
8. Output
1170-1171/072202
DIGIFLEX 1170/1171 SDI VIDEO DISTRIBUTION AMPLIFIER
SPECIFICATIONS
SERIAL DIGITAL VIDEO INPUT:
Standard: ..................................................... 143Mb/s, SMPTE 259M-C
......................................................................... 177Mb/s
......................................................................... 270Mb/s
......................................................................... 360Mb/s
Impedance: .................................................................... 75Ω
ReturnLoss: .................................................................. >20dB
Signal Level: ............................................................ 800mV±10%
CMR:............................................................. 30Vp-p,upto60Hz
Connectors: .................................................................... BNC
Equalization: ..................................................... Automaticupto>30dB
SERIAL VIDEO OUTPUTS:
NumberofOutputs:................................................................. 8
Standards: ............................................................. Sameasinput
Connectors: .................................................................... BNC
Impedance: .................................................................... 75Ω
ReturnLoss: .................................................................. >20dB
Signal Level: .......................................................(1170) 800mV ±10%
OutputLevel:........................................... Adj.410mV to 1080mV (1171 only)
DC Offset: .................................................................. 0V±0.5V
Rise&FallTime:.......................................................... 1nS±250 ps
Overshoot: .......................................................... <10%ofAmplitude
Through Delay: .................................................................. 4nS
Input Cable Length, Max.: ........................................................500 Ft.
FRONT CONTROLS & INDICATORS:
Power:................................................................... Green LED
No Signal: ................................................................. RedLED
No Signal Detect Adj: ..................................................... Potentiometer
DetectPoint: ............................................................... TestPoint
+5VDC: ................................................................... TestPoint
Ground: ................................................................... TestPoint
ENVIRONMENTAL:
Temperature:........................................................ 0°to50°CAmbient
Humidity:................................................... 10%to90%non-condensing
Power:...................................................................... 320mW
MECHANICAL:
Height:...................................................... 3.2Inch
Width: ...................................................... 1.0Inch
Length ....................................................... 10Inch
Weight: ..................................................... 7.25Oz
LINK ELECTRONICS, INC.
2137 Rust Avenue
Cape Girardeau, MO 63703
Phone: [phone]
FAX: [phone]
PROFESSIONAL SERIES--
modular system products--by LINK